GRIFEMA GB1004-1 Full Motion TV Wall Mount Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your GRIFEMA GB1004-1 Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.

2. Safety Information

Important Safety Instructions:

• Ensure the mounting surface can safely support the combined weight of the mount and your television.
• Do not install on plaster walls, cavity walls, or soft walls. This mount is designed for solid concrete, concrete block, or brick walls.
• Always use appropriate safety equipment, including eye protection, during installation.
• Follow all installation steps carefully. If you are unsure about any part of the installation, consult a qualified professional.
• Do not exceed the maximum load capacity of 35 kg (77 lbs).
• This mount is suitable for TVs between 26 and 65 inches.
• Verify VESA compatibility (mounting hole pattern) of your TV before installation.

Figure 1: Compatible Wall Types
This image illustrates the types of walls suitable for installation: solid concrete/concrete block and brick walls. It also includes a warning against installation on plaster, cavity, or soft walls, emphasizing the importance of a secure mounting surface.

3. Package Contents

Before beginning installation, please verify that all components are present and undamaged. If any parts are missing or defective, do not proceed with installation and contact customer support.

Figure 2: Wall Mount and Accessories
This image displays the main components of the GRIFEMA GB1004-1 TV wall mount, including the articulated arm, TV mounting plates, and a selection of accessories such as an HDMI cable, a small bubble level, cable ties, and various screws and wall anchors for different installation needs.

Figure 3: Detailed Hardware Overview
A closer look at the complete set of hardware provided with the wall mount. This includes various sizes of bolts, washers, and spacers to accommodate different TV models, along with wall anchors, a small wrench, a bubble level for accurate installation, and an HDMI cable for connectivity.

4. Specifications

• Model: GRIFEMA GB1004-1
• Screen Size Compatibility: 26 - 65 inches
• Maximum Load Capacity: 35 kg (77 lbs)
• VESA Compatibility (mm): 75x75, 100x100, 200x100, 200x200, 300x300, 400x200, 400x300, 400x400
• Swivel Range: +/- 45°
• Tilt Range: +8° (up) to -12° (down)
• Horizontal Adjustment: +/- 3° (post-installation leveling)
• Wall Distance (Extension): 60 mm (retracted) to 375 mm (extended)
• Material: Alloy Steel
• Color: Black
• Compatible Wall Types: Solid concrete, concrete block, brick wall

Figure 4: VESA Patterns and Dimensions
This diagram details the available VESA mounting patterns supported by the mount, ranging from 75x75mm to 400x400mm. It also shows the minimum (50mm) and maximum (410mm) extension capabilities of the mount from the wall, along with the overall dimensions of the TV mounting plate.

Figure 5: TV Size and Load Capacity
This image visually confirms the mount's compatibility with televisions ranging from 26 to 65 inches and highlights its maximum load capacity of 35 kg (77 lbs), ensuring users can match their TV to the mount's specifications.

5. Setup and Installation

Follow these steps carefully for a secure installation. It is recommended to have two people for certain steps, especially when lifting the TV.

5.1 Pre-Installation Checklist

1. Verify Wall Type: Confirm your wall is solid concrete, concrete block, or brick. Do not install on plaster, cavity, or soft walls.
2. Check TV Compatibility: Ensure your TV's size (26-65 inches), weight (under 35 kg), and VESA pattern are compatible with the mount.
3. Gather Tools: You will need a drill, stud finder (if applicable), level, pencil, and a screwdriver.

5.2 Mounting the Wall Plate

1. Determine Location: Choose the desired height and position for your TV.
2. Mark Drill Holes: Hold the wall plate against the wall at the desired height and use a pencil to mark the drill holes. Use the included bubble level to ensure it is perfectly horizontal.
3. Drill Holes: Drill pilot holes at the marked locations. The size of the drill bit will depend on the wall anchors provided and your wall material.
4. Insert Anchors: Insert the appropriate wall anchors into the drilled holes.
5. Attach Wall Plate: Secure the wall plate to the wall using the provided screws and a wrench. Ensure it is firmly attached.

5.3 Attaching Brackets to TV

1. Lay TV Down: Carefully place your TV face-down on a soft, clean surface to prevent screen damage.
2. Attach TV Brackets: Align the vertical TV brackets with the VESA mounting holes on the back of your TV. Use the appropriate screws, washers, and spacers from the hardware kit to secure the brackets. Do not overtighten.

5.4 Mounting TV to Wall Plate

1. Lift TV: With assistance, carefully lift the TV with the attached brackets.
2. Hook onto Wall Plate: Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the wall plate.
3. Secure TV: Use the safety screws or locking mechanisms on the TV brackets to prevent the TV from accidentally disengaging from the wall plate.
4. Level Adjustment: After mounting, you can make a horizontal adjustment of +/- 3° to ensure the TV is perfectly level.

6. Operating Instructions

The GRIFEMA GB1004-1 mount offers full motion capabilities for optimal viewing angles.

6.1 Adjusting Swivel

Gently push or pull the TV to swivel it left or right. The mount allows for a swivel range of +/- 45 degrees, enabling you to adjust the viewing angle from various positions in the room.

6.2 Adjusting Tilt

To adjust the vertical tilt, loosen the tilt adjustment knobs or bolts on the TV brackets (if applicable), tilt the TV to the desired angle (+8° up to -12° down), and then re-tighten the knobs/bolts to secure the position.

6.3 Extending and Retracting

The articulated arm allows you to extend the TV up to 375 mm from the wall or retract it to a minimum distance of 60 mm. Gently pull the TV forward or push it back to achieve the desired distance.

Figure 6: Viewing Experience Adjustments
This diagram demonstrates the various adjustments possible with the mount: swivel adjustment of +/- 45 degrees, horizontal adjustment of +/- 3 degrees for leveling, and tilting capabilities of 8 degrees up and 12 degrees down. These features allow for a customized viewing experience.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your TV wall mount.

• Periodic Checks: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
• Cleaning: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Lubrication: The moving parts are designed for smooth operation. Avoid applying lubricants unless specifically instructed by the manufacturer.

8. Troubleshooting

If you encounter any issues during or after installation, refer to the following common problems and solutions.

• TV is not level after installation: Use the +/- 3° horizontal adjustment feature to fine-tune the level. If this is insufficient, re-check the wall plate installation for levelness.
• Mount feels loose on the wall: Immediately remove the TV and re-check all wall plate screws and anchors. Ensure they are securely fastened into the appropriate wall material.
• TV does not move smoothly: Check for any obstructions or loose cables. Ensure all adjustment bolts are not overtightened, allowing for free movement.
• Missing parts: Do not proceed with installation. Contact GRIFEMA customer support for assistance.

9. Warranty and Support

GRIFEMA products are manufactured to high-quality standards. For information regarding warranty coverage or technical support, please refer to the warranty card included with your product or visit the official GRIFEMA website. If you have any questions or require assistance, please contact GRIFEMA customer service.