Vetroo B6 Full HD 2K Multi-Mode LED Display Board

1. Introduction

The Vetroo B6 LED Display Board is a versatile accessory designed to enhance the aesthetic and informational aspects of your computer PC case. Featuring Full HD 2K resolution and multiple adjustable lighting modes, this universal panel is suitable for most computer cases. Its easy installation process, utilizing double-sided tape, eliminates the need for screws or clips. This manual provides comprehensive instructions for proper setup, operation, and maintenance to ensure optimal performance and longevity of your display board.

2. Package Contents

Please verify that all items listed below are included in your package:

• Vetroo B6 LED Display Board (1 unit)
• Double-sided adhesive tape (pre-applied or included separately)
• USB connection cable (for power and data)
• HDMI connection cable (for video signal)
• Mounting screws (if applicable for alternative mounting)
• Instruction Manual (this document)

3. Specifications

4. Setup and Installation

The Vetroo B6 Display Board is designed for straightforward installation. Follow these steps to integrate it into your PC case:

1. Prepare your PC Case: Ensure your PC case is powered off and unplugged. Open the side panel to access the interior.
2. Determine Placement: Identify a suitable flat surface within your PC case for mounting the display board. The board measures 250 x 80 x 6mm and can be oriented horizontally or vertically. Common placements include the PSU shroud or along the side of the motherboard tray.
3. Clean the Surface: Thoroughly clean the chosen mounting surface to ensure optimal adhesion of the double-sided tape.
4. Apply/Expose Adhesive: The display board comes with pre-applied double-sided tape. Carefully peel off the protective backing from the tape.
5. Mount the Display Board: Align the display board with your desired position and firmly press it onto the cleaned surface. Apply even pressure for a few seconds to secure it.
6. Connect Cables:
   • Connect the provided HDMI cable from the display board to an available HDMI port on your graphics card or motherboard.
   • Connect the provided USB cable from the display board to an available USB header on your motherboard or an external USB port for power and data transmission.
7. Cable Management: Route the cables neatly to avoid interference with other components and to maintain good airflow within the case.

Figure 1: Vetroo B6 Display Board installed horizontally in a PC case, showcasing its vibrant LED lighting.

Figure 2: Vetroo B6 Display Board with anime-style art installed in a PC case, illuminating the interior.

Figure 3: Diagram showing the dimensions of the Vetroo B6 Display Board: 12.2 inches (horizontal) by 3.1 inches (vertical).

Figure 4: Vetroo B6 Display Board installed vertically in a PC case, displaying dynamic content.

5. Operating Instructions

Once installed and connected, the Vetroo B6 Display Board will power on with your PC. The display is designed to be plug-and-play, automatically mirroring or extending your desktop as a secondary display. You can customize its content and appearance through your operating system's display settings.

Adjusting Lighting Modes:

The display board features three adjustable speed lighting effects: Breathing, Flashing, and Bright (monochromatic cool white). These modes can typically be cycled or adjusted via a small button on the display board itself or through compatible software, if provided by the manufacturer. Refer to the specific software instructions for advanced customization.

6. Maintenance

To ensure the longevity and clear display of your Vetroo B6 LED Display Board, follow these maintenance guidelines:

• Cleaning: Gently wipe the acrylic surface with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water or a non-abrasive screen cleaner. Avoid harsh chemicals or abrasive materials that could scratch the surface.
• Dust Removal: Use compressed air to remove dust from around the edges and any small crevices of the display board.
• Cable Inspection: Periodically check all connected cables (HDMI, USB) for any signs of wear, damage, or loose connections.

7. Troubleshooting

If you encounter any issues with your Vetroo B6 LED Display Board, please refer to the following common troubleshooting steps:

• No Display/Black Screen:
  • Ensure both the HDMI and USB cables are securely connected to the display board and your PC.
  • Verify that your PC is powered on and the display board is receiving power via the USB connection.
  • Check your operating system's display settings to ensure the display board is detected and configured as an extended or duplicated display.
  • Try connecting the HDMI cable to a different port on your graphics card or motherboard.
• Incorrect Resolution/Aspect Ratio:
  • Adjust the display resolution in your operating system's display settings to match the recommended 2K resolution for the Vetroo B6.
• Lighting Modes Not Changing:
  • If there is a physical button on the display board, press it to cycle through the lighting modes.
  • If using software control, ensure the software is correctly installed and running, and that the display board is recognized.
• Display Not Sticking:
  • Ensure the mounting surface was clean and dry before applying the double-sided tape.
  • Apply firm, even pressure for an extended period (e.g., 30 seconds) during installation.
  • If the adhesive wears out, replace it with new high-quality double-sided tape.

8. Warranty and Support

Vetroo products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Vetroo website. For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please contact Vetroo customer service through their official channels.