1. Important Safety Instructions
Read and understand all safety warnings and instructions before operating this vacuum cleaner. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.
- Do not leave the appliance when plugged in. Unplug from outlet when not in use and before servicing.
- Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer’s recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not use without filters in place.
- Turn off all controls before unplugging.
- Use extra care when cleaning on stairs.
- Use only proper grounding outlets.
2. Product Overview and Included Components
The Vacmaster VBVB611PF 1101 is a versatile 6-gallon wet/dry vacuum with a detachable 5 Peak HP motor that converts into a handheld blower. This section details the components included with your purchase.
Image 2.1: The Vacmaster VBVB611PF 1101 Wet/Dry Vacuum with its full set of accessories. This includes the main unit, hose, extension wands, crevice tool, floor brush, blower adapter, blower tube, foam wet filter, and cartridge filter.
Included Accessories:
- Foam Wet Filter: For wet pickup operations.
- Cartridge Filter: For dry pickup operations.
- Blower Adapter: Connects the blower tube to the motor unit for handheld blower use.
- Blower Tube: Directs airflow during blower operation.
- Crevice Tool: For cleaning in tight spaces and corners.
- Extension Wands: Three pieces to extend reach for floor cleaning or high areas.
- Hose: Flexible hose for vacuuming and connecting accessories.
- Floor Brush: For general floor cleaning.
3. Setup and Assembly
Follow these steps to assemble your Vacmaster wet/dry vacuum.
3.1 Attaching the Casters
- Invert the collection tank.
- Insert the four caster feet into the slots on the bottom of the tank.
- Secure each caster with a screw using a screwdriver (not included).
3.2 Filter Installation
The type of filter used depends on whether you are performing wet or dry vacuuming.
Image 3.1: The Vacmaster VBVB611PF 1101 unit showing the motor head detached from the collection tank, ready for filter installation or blower conversion.
For Dry Vacuuming:
- Ensure the collection tank is empty and clean.
- Place the cartridge filter over the filter cage on the motor head.
- Secure the cartridge filter with the filter cap by twisting it clockwise.
- Do not use the foam filter for dry vacuuming.
For Wet Vacuuming:
- Remove the cartridge filter and filter cap if installed.
- Slide the foam wet filter over the filter cage on the motor head.
- Ensure the foam filter completely covers the filter cage.
- Do not use the cartridge filter for wet vacuuming.
3.3 Attaching the Motor Head
- Align the motor head with the collection tank.
- Press down firmly until the motor head is seated properly.
- Secure the motor head by latching the two side clips. Ensure they snap into place for a secure seal.
Image 3.2: A hand demonstrating the one-hand release mechanism to detach the motor unit from the vacuum base, facilitating conversion to a blower or filter access.
3.4 Attaching the Hose and Accessories
- Insert the larger end of the hose into the vacuum port on the collection tank. Twist to secure.
- Attach desired accessories (extension wands, floor brush, crevice tool) to the smaller end of the hose.
4. Operating Instructions
This section details how to operate your Vacmaster wet/dry vacuum for various cleaning tasks.
4.1 Powering On/Off
Plug the power cord into a grounded electrical outlet. The vacuum is equipped with a simple ON/OFF switch located on the motor head. Press 'I' for ON and 'O' for OFF.
4.2 Dry Vacuuming
Ensure the cartridge filter is correctly installed for dry pickup. Attach the hose and desired dry vacuuming accessories. Turn the unit ON and proceed with cleaning dry debris.
Image 4.1: A person using the Vacmaster vacuum with extension wands and floor brush to clean dry debris from a garage floor, demonstrating its powerful suction.
4.3 Wet Vacuuming
Ensure the foam wet filter is correctly installed and the cartridge filter is removed. Attach the hose and appropriate wet vacuuming accessories. Turn the unit ON and proceed with cleaning liquid spills. Empty the tank regularly to prevent overflow.
Image 4.2: A person using the Vacmaster vacuum to quickly pick up a liquid spill on a wooden floor, highlighting its wet pickup capability.
4.4 Detachable Blower Operation
The motor head can be detached and used as a handheld blower.
- Unlatch the two side clips and remove the motor head from the collection tank.
- Attach the blower adapter to the exhaust port on the motor head.
- Attach the blower tube to the blower adapter.
- Plug in the power cord and turn the unit ON to use as a blower.
Image 4.3: A person using the detachable motor unit as a handheld blower to clear leaves from a patio, demonstrating its powerful 190 MPH blowing capability.
5. Maintenance
Regular maintenance ensures optimal performance and extends the life of your Vacmaster vacuum.
5.1 Emptying the Collection Tank
After wet or dry use, unlatch the motor head and carefully lift it off. Dispose of collected debris or liquids. Clean the inside of the tank with water and mild soap if necessary, then dry thoroughly before reassembly.
5.2 Filter Cleaning and Replacement
Cartridge Filter (Dry Use):
- Tap the filter gently to remove loose dust.
- For deeper cleaning, rinse the filter under running water. Allow it to air dry completely before reinstallation.
- Replace the filter if it is damaged or if suction power significantly decreases after cleaning.
Foam Wet Filter (Wet Use):
- Rinse the foam filter under running water to remove debris.
- Squeeze out excess water and allow it to air dry completely before storage or next use.
5.3 Hose and Accessory Storage
The unit features on-board storage for the hose, power cord, and some accessories. Wrap the hose around the top of the unit and secure the power cord. Store smaller accessories in the designated slots on the caster feet.
Image 5.1: The Vacmaster VBVB611PF 1101 demonstrating its on-board hose, cord, and accessory storage, along with key dimensions and features like detachable motor and large locking latches.
6. Troubleshooting
If you encounter issues with your Vacmaster vacuum, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum will not turn on | No power to outlet Power cord not plugged in Faulty switch | Check circuit breaker/fuse Ensure cord is securely plugged in Contact customer service |
| Poor suction or blowing | Clogged hose/accessories Full collection tank Incorrect/clogged filter Loose motor head seal | Clear obstructions Empty tank Clean/replace filter; ensure correct filter for task Secure motor head latches |
| Motor runs hot | Clogged filter Restricted airflow | Clean/replace filter Check hose and ports for blockages |
| Water leaking from unit | Foam filter not installed for wet use Tank overfilled Loose motor head seal | Install foam filter Empty tank Secure motor head latches |
7. Specifications
Key technical specifications for the Vacmaster VBVB611PF 1101 Wet/Dry Vacuum.
- Model Name: VBVB611PF 1101
- Capacity: 6 Gallons
- Motor Horsepower: 5 Peak HP
- Wattage: 1200 watts
- Amperage: 10.5 Amps
- Maximum Suction (Water Lift): 70 Inches
- Airflow (CFM): 70 CFM
- Max Blowing Speed: 190 MPH
- Hose Length: 7 Feet
- Power Cord Length: 10 Feet
- Noise Level: 75 Decibels
- Product Dimensions (L x W x H): 13" x 14" x 19"
- Item Weight: 13.45 pounds
- Filter Type: Cartridge (dry), Foam (wet)
- Connectivity Technology: Corded Electric
8. Warranty Information
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official Vacmaster website. Keep your purchase receipt as proof of purchase for any warranty claims.
9. Customer Support
If you require further assistance or have questions not covered in this manual, please contact Vacmaster customer service. Contact details can typically be found on the product packaging or the official Vacmaster website.
