Audeze LCD-2 Classic

Audeze LCD-2 Classic Over-Ear Open Back Headphone User Manual

Model: LCD-2 Classic | Brand: Audeze

Introduction

The Audeze LCD-2 Classic is an over-ear, open-back headphone designed for an immersive audio experience. This model is a reissue of the vintage original, offering a warm tonality without Fazors. It features 100mm Planar Magnetic drivers for superior impulse response and realistic sound reproduction, complemented by glass-infused nylon rings for enhanced sound quality and durability.

Crafted in Southern California, each LCD-2 Classic headphone undergoes meticulous handcrafting, rigorous testing, and calibration to ensure exceptional sound quality and longevity.

Audeze LCD-2 Classic headphones banner with text 'Exceptionally Musical'

Image: Audeze LCD-2 Classic headphones, highlighting their musicality.

Package Contents

  • Audeze LCD-2 Classic Over-Ear Open Back Headphones
  • Standard Headphone Cable (3.5mm jack)
  • Economy Carry Case
Audeze LCD-2 Classic headphones, carry case, and various cables

Image: The Audeze LCD-2 Classic headphones shown with their included carry case and connection cables.

Setup Instructions

  1. Unpacking: Carefully remove the headphones and all accessories from the carry case.
  2. Cable Connection: Connect the provided headphone cable to the 3.5mm jacks located on each earcup. Ensure a secure connection.
  3. Source Connection: Plug the other end of the cable into your audio source (e.g., amplifier, DAC, computer, mobile device). The LCD-2 Classic headphones are designed for optimal performance with a good amplifier.
  4. Adjusting Fit: Adjust the steel suspension headband and rotate the earcups to achieve a comfortable and secure fit over your ears. The leather-free memory foam earpads are designed for comfort during extended listening sessions.
Audeze LCD-2 Classic headphones connected to a Questyle CMA Twelve amplifier

Image: Audeze LCD-2 Classic headphones connected to an external amplifier, demonstrating a typical setup.

Operating Instructions

  • Volume Control: Adjust the volume using your audio source. Start with a low volume and gradually increase it to a comfortable listening level.
  • Listening Environment: As open-back headphones, the LCD-2 Classic allows some ambient sound to pass through and also leaks sound. For the best experience, use them in a quiet environment.
  • Break-in Period: Like many high-fidelity audio products, the LCD-2 Classic may benefit from a break-in period. Initial sound characteristics may evolve slightly after several hours of use.
Man wearing Audeze LCD-2 Classic headphones, enjoying music

Image: A user wearing the Audeze LCD-2 Classic headphones, illustrating typical usage.

Maintenance and Care

  • Cleaning: Use a soft, dry cloth to clean the headphones. Avoid using harsh chemicals or abrasive materials.
  • Earpad Care: The leather-free memory foam earpads can be gently wiped with a damp cloth if necessary. Ensure they are completely dry before use.
  • Storage: When not in use, store the headphones in their provided economy carry case to protect them from dust and physical damage.
  • Cable Management: Avoid sharp bends or excessive pulling on the cable to prevent damage.
  • Environmental Conditions: Do not expose the headphones to extreme temperatures, humidity, or direct sunlight for prolonged periods. They are not water-resistant.
Audeze LCD-2 Classic headphones resting on a wooden headphone stand

Image: Audeze LCD-2 Classic headphones displayed on a stand, demonstrating proper storage.

Troubleshooting

ProblemPossible CauseSolution
No SoundCable not connected properly; Audio source volume too low; Audio source not playing.Ensure cables are securely connected to both headphones and audio source. Increase volume on audio source. Verify audio source is playing.
Distorted SoundVolume too high; Faulty cable; Audio source issue.Reduce volume. Try a different cable if available. Test with another audio source.
Uncomfortable FitHeadband or earcups not adjusted correctly.Adjust the headband sliders and earcup rotation until a comfortable fit is achieved.

Specifications

Diagram illustrating the internal components of the Audeze LCD-2 Classic driver, including N50 Fluxor Magnetic Array and Ultra-Thin Diaphragm

Image: Detailed diagram of the Audeze LCD-2 Classic planar magnetic driver technology.

FeatureDetail
BrandAudeze
Model NameLCD-2 Classic
Model Number100-LC-1016-00
Ear PlacementOver Ear
Style NameOpen Back
ColorBlack
Driver TypePlanar Magnetic Driver (100mm)
Frequency Range10 - 50,000Hz
Sensitivity101 dB
Connectivity TechnologyWired
Headphone Jack3.5 mm Jack
HeadbandSteel suspension headband
EarpadsLeather-free memory foam
Enclosure MaterialNylon (glass-infused rings)
Dimensions (approx.)11 x 11 x 7 inches
Weight (approx.)6.2 pounds (product weight, not shipping weight)
Crafted InSouthern California, USA

Warranty Information

The Audeze LCD-2 Classic headphones come with a 3-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For detailed terms and conditions, or to initiate a warranty claim, please refer to the official Audeze website or contact their customer support.

Support and Contact

For further assistance, technical support, or inquiries regarding your Audeze LCD-2 Classic headphones, please visit the official Audeze website or contact their customer service department.

  • Official Website: www.audeze.com
  • Customer Service: Refer to the website for contact details specific to your region.

© 2024 Audeze. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.