ANZZI Rhodes 76" x 48" Modern Frameless Shower Door Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ANZZI Rhodes 76" x 48" Modern Frameless Shower Door. Please read all instructions carefully before beginning installation to ensure safe and proper assembly and use.

Key features of your ANZZI shower door include:

• Frameless sliding design with a modern aesthetic.
• Rhodes series water repellent glass with Tsunami Guard shielding for easy cleaning and stain resistance.
• Rhino Alloy certified stainless steel rollers and hardware for smooth, effortless sliding.
• Reversible installation for left or right-side entry.
• Durable 5/16 inch (8mm) tempered Deco-Glass, ANSI certified for safety.

Figure 1: ANZZI Rhodes 76" x 48" Modern Frameless Shower Door in Matte Black.

2. Setup and Installation

Proper installation is crucial for the functionality and longevity of your shower door. It is highly recommended that two people perform the installation due to the weight and size of the glass panels.

2.1 Pre-Installation Checks

• Verify all parts are present and undamaged against the packing list.
• Ensure the shower opening walls are plumb and the threshold is level.
• Gather all required tools as specified in the manual.

2.2 Installation Video Guide

For a visual guide on the installation process, please refer to the official ANZZI installation video below. This video demonstrates key steps and techniques for successful assembly.

2.3 Key Installation Steps (Summary)

1. Measure your shower opening accurately.
2. Install the wall brackets and support bar, ensuring they are level and plumb.
3. Secure the bottom rail and guide block to the shower base using appropriate drilling techniques for your material (acrylic, wood, or tile).
4. Mount the fixed glass panel, ensuring proper alignment and sealing with silicone.
5. Attach the rollers and handles to the sliding glass panel.
6. Carefully hang the sliding door onto the support bar and adjust for smooth operation.
7. Apply silicone sealant as instructed to prevent leaks.

Figure 2: Key features including dimensions, easy glide rollers, and reversible installation.

Figure 3: Rhino Alloy Certified aluminum and zinc rollers and hardware ensure smooth operation and durability.

3. Operating Instructions

Your ANZZI frameless shower door is designed for smooth and effortless operation. Follow these guidelines for optimal use:

3.1 Opening and Closing the Door

Grasp the handle firmly and gently slide the door along the top rail. The easy-glide rollers ensure a quiet and comfortable motion. Avoid forcing the door or slamming it shut.

3.2 Water Sealing

The shower door features magnetic water seals and Tsunami Guard shielding to minimize water leakage. Ensure the doors close completely to engage the magnetic seal.

Figure 4: The flawless Matte Black finish and pristine crystal clear glass enhance the modern design.

4. Maintenance and Care

Regular cleaning and maintenance will preserve the appearance and functionality of your ANZZI shower door.

4.1 Glass Cleaning

The Tsunami Guard shielding on the glass helps repel water and resist stains. For daily cleaning, use a soft cloth or squeegee after each shower to remove water spots. For deeper cleaning, use a non-abrasive glass cleaner specifically designed for shower doors. Avoid harsh chemicals or abrasive pads that can damage the glass or finish.

4.2 Hardware Care

Clean the Matte Black hardware with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishing agents, as these can damage the finish. Periodically check all screws and connections to ensure they are secure.

5. Troubleshooting

If you encounter any issues with your shower door, refer to the following common troubleshooting tips:

• Door not sliding smoothly: Check the rollers for any debris or obstructions. Ensure the top rail is clean and free of buildup. Lubricate rollers with a silicone-based lubricant if necessary.
• Water leakage: Verify that the magnetic seals are fully engaging when the door is closed. Inspect the silicone sealant along the edges for any gaps or damage and reapply if needed. Ensure the bottom rail is properly installed and sealed.
• Door misalignment: Refer to the installation video or consult a professional if the door appears to be off-level or misaligned. Minor adjustments to rollers or wall brackets may be required.

For persistent issues, please contact ANZZI customer support.

6. Specifications

7. Warranty and Support

7.1 Limited Lifetime Warranty

ANZZI products are backed by a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service. Please refer to the warranty card included with your product for full terms and conditions.

7.2 Product Registration

To ensure your product is recognized as an official purchase and is eligible for warranty coverage, please register your product within 90 days of purchase. You can mail in the completed registry card (Page 2 of your manual) or register online at https://register.anzzihome.com/register/.

7.3 Customer Support

For technical assistance, replacement parts, or any questions regarding your ANZZI shower door, please contact ANZZI customer support. Contact information can typically be found on the ANZZI website or on your product packaging.