Audibax Onyx 120

Download PDF
Contents

Audibax Onyx 120 Double Scissor Keyboard Stand User Manual

Model: Onyx 120 | Brand: Audibax

1. Introduction

Thank you for choosing the Audibax Onyx 120 Double Scissor Keyboard Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new keyboard stand. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

  • Ensure all components are securely fastened before placing any instrument on the stand.
  • Do not exceed the maximum load capacity of 25 kg (55 lbs).
  • Place the stand on a stable, level surface to prevent tipping.
  • Keep fingers clear of moving parts during adjustment to avoid pinching.
  • Regularly inspect the stand for any signs of wear or damage. Do not use if damaged.

3. Package Contents

The Audibax Onyx 120 Keyboard Stand package includes:

  • Audibax Onyx 120 Double Scissor Keyboard Stand frame
  • Hexagonal key for assembly
  • Instruction Manual

Note: Synthesizers, samplers, and digital instruments are not included.

4. Setup and Assembly

Assembly of the Audibax Onyx 120 is designed to be quick and straightforward, typically taking less than 10 minutes.

  1. Unfold the main X-frame of the keyboard stand.
  2. Identify the upper and lower support arms. These are typically pre-attached but may require tightening.
  3. Using the provided hexagonal key, securely tighten any screws on the upper and lower arms to ensure stability.
  4. Ensure the anti-slip rubber caps on the feet and support arms are firmly in place.
Audibax Onyx 120 Double Scissor Keyboard Stand, folded

Figure 4.1: The Audibax Onyx 120 Double Scissor Keyboard Stand in its folded configuration, ready for setup or transport. This image shows the stand's compact design.

Close-up of Audibax Onyx 120 top arm with adjustment holes

Figure 4.2: A detailed view of the top support arm of the Audibax Onyx 120, highlighting the adjustment holes and the anti-slip rubber padding designed to secure the keyboard.

5. Operation

5.1 Adjusting Height

The Audibax Onyx 120 features an integrated adjustment system with an Easy Lock ball joint, allowing you to quickly set the stand to your desired playing height, up to a maximum of 98 cm.

  1. Locate the Easy Lock mechanism at the center pivot point of the X-frame.
  2. Loosen the locking knob or lever (if applicable) to allow the stand to move freely.
  3. Adjust the stand to the desired height by expanding or compressing the X-frame.
  4. Once the desired height is reached, securely tighten the locking knob or lever to fix the stand in position. Ensure it is stable before proceeding.

5.2 Placing Your Keyboard

The stand is equipped with anti-slip rubber on both the upper and lower arms to ensure maximum stability and protection for your instrument and floor.

  1. Carefully place your keyboard or digital instrument onto the upper support arms.
  2. Ensure the keyboard is centered and sits firmly on the anti-slip rubber pads.
  3. Verify that the stand remains stable and does not wobble.
Audibax Onyx 120 Keyboard Stand with a keyboard placed on it

Figure 5.1: The Audibax Onyx 120 Keyboard Stand supporting a musical keyboard, demonstrating its intended use and stability.

5.3 Transport and Storage

This keyboard stand is foldable and lightweight, making it easy to transport and store. To fold, simply reverse the height adjustment process until the stand is fully collapsed. Its compact size allows for convenient storage or transport to various events.

Close-up of Audibax Onyx 120 base with anti-slip feet

Figure 5.2: A close-up view of the base of the Audibax Onyx 120 Keyboard Stand, showing the robust construction and the anti-slip rubber feet that protect the floor and enhance stability.

6. Maintenance

  • Cleaning: Wipe the stand with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
  • Inspection: Periodically check all screws, bolts, and the locking mechanism for tightness. Ensure the anti-slip rubber pads are intact and not worn.
  • Storage: Store the stand in a dry environment, away from extreme temperatures and humidity.

7. Troubleshooting

  • Stand feels unstable:
    • Ensure the locking mechanism is fully engaged and tightened.
    • Verify that the stand is placed on a flat, level surface.
    • Check all assembly screws for tightness using the hexagonal key.
  • Keyboard slides on the stand:
    • Ensure the anti-slip rubber pads on the support arms are clean and intact.
    • Confirm the keyboard is properly centered on the support arms.

8. Specifications

FeatureDetail
Model NameOnyx 120
Model Number10187388
BrandAudibax
TypeDouble Scissor Keyboard Stand
MaterialAlloy Steel
Maximum Load Capacity25 kg (55 lbs)
Adjustable HeightUp to 98 cm
Folded Dimensions (L x W x H)10 x 10 x 96 cm (approx.)
Weight2.4 kg (approx.)
Assembly RequiredYes

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Audibax customer service through their official website. Keep your proof of purchase for any warranty claims.

© 2025 Audibax. All rights reserved. Information in this manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.