Hikvision DS-PDP15P-EG2-WE

Download PDF
Contents

Hikvision DS-PDP15P-EG2-WE Wireless Indoor PIR Detector User Manual

Model: DS-PDP15P-EG2-WE

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Hikvision DS-PDP15P-EG2-WE Wireless Indoor PIR Detector. Please read this manual carefully before using the product to ensure proper functionality and safety. Keep this manual for future reference.

2. Product Overview

2.1 Key Features

  • Detection Range: 15 meters with an 85.9° coverage angle.
  • Pet Immunity: Immune to pets weighing up to 30 kg, reducing false alarms.
  • SEC (Smart Environmental Control): Advanced digital signal processing and 3D optics for reliable detection.
  • Remote Configuration: Fully configurable via a dedicated application.
  • Easy Installation: Multiple enrollment methods and a design facilitating simple setup.
  • Replaceable Battery: Features an easily replaceable battery with a protected circuit board.
  • Reliable Transmission: Utilizes frequency hopping to counter interference.

2.2 Package Contents

  • Hikvision DS-PDP15P-EG2-WE Wireless Indoor PIR Detector
  • User Manual (this document)
  • Mounting Screws
  • 1 x CR123A Battery (pre-installed or included separately)
Front view of the Hikvision DS-PDP15P-EG2-WE Wireless Indoor PIR Detector.

Figure 1: Front view of the Hikvision DS-PDP15P-EG2-WE Wireless Indoor PIR Detector. The device is white, with a smooth, rounded rectangular shape. The lower section features a translucent, slightly curved lens, which is the PIR sensor window. The overall design is compact and discreet, suitable for indoor environments.

3. Setup

3.1 Battery Installation

  1. Open the detector casing by gently prying it open from the designated notch, usually at the bottom or side.
  2. Locate the battery compartment.
  3. Insert the provided CR123A battery, ensuring correct polarity (+ and -).
  4. Close the detector casing securely until it clicks into place.

3.2 Mounting

The detector is designed for wall mounting. Choose a location that provides optimal coverage of the area to be monitored, avoiding direct sunlight, heat sources, or areas with significant air currents.

  1. Select a suitable wall location, typically 1.8 to 2.4 meters (6 to 8 feet) above the floor.
  2. Use the provided mounting screws to secure the detector's backplate to the wall.
  3. Attach the main body of the detector to the secured backplate.

3.3 Device Enrollment

The DS-PDP15P-EG2-WE supports multiple enrollment methods for integration with your security system. Refer to your security system's main control panel manual for specific instructions on adding wireless devices.

  • Typically, this involves putting your control panel into 'enrollment' or 'pairing' mode.
  • Activate the detector (e.g., by triggering it or pressing a tamper switch) to send its signal to the control panel.
  • Confirm successful enrollment via the control panel's display or application.

4. Operating Instructions

4.1 Detection Functionality

Once enrolled and powered, the PIR detector continuously monitors its detection area for infrared heat signatures indicative of human movement. The 15-meter range and 85.9° angle ensure broad coverage.

  • Pet Immunity: The detector is designed to ignore pets up to 30 kg, minimizing false alarms caused by household animals.
  • SEC Technology: Smart Environmental Control (SEC) technology enhances detection accuracy and reduces environmental interference.

4.2 Remote Configuration

The detector can be fully configured and managed remotely through the Hikvision application connected to your security system. This allows for adjustments to sensitivity, operating modes, and other parameters without physical access to the device.

5. Maintenance

5.1 Battery Replacement

The detector is powered by a single CR123A battery. When the battery level is low, your security system will typically provide a notification. Replace the battery promptly to ensure continuous operation.

  1. Disarm your security system before proceeding.
  2. Open the detector casing as described in Section 3.1.
  3. Remove the old CR123A battery.
  4. Insert a new CR123A battery, observing correct polarity.
  5. Close the casing securely.
  6. Test the detector to confirm it is functioning correctly and communicating with the control panel.

5.2 Cleaning

To maintain optimal performance, periodically clean the detector's lens and casing.

  • Use a soft, dry, lint-free cloth to wipe the exterior.
  • Do not use abrasive cleaners, solvents, or spray directly onto the device.

6. Troubleshooting

This section addresses common issues you might encounter with your PIR detector.

ProblemPossible CauseSolution
Detector not responding/no detectionLow or dead battery; not properly enrolled; obstruction in detection path; incorrect mounting height.Replace battery; re-enroll device with control panel; clear obstructions; verify mounting height (1.8-2.4m).
False alarmsPets exceeding immunity weight; direct sunlight or heat sources; strong air currents; loose mounting.Ensure pets are within immunity limits or adjust placement; relocate away from heat/sun; secure mounting; adjust sensitivity via app if available.
Poor wireless signalDistance from control panel; interference from other devices; building materials.Relocate detector closer to the control panel; identify and remove sources of interference; consider a wireless repeater if available for your system.

7. Specifications

SpecificationDetail
Model NumberDS-PDP15P-EG2-WE
Detection Range15 meters / 85.9°
Pet ImmunityUp to 30 kg
Power SourceBattery-powered
Battery Type1 x CR123A (included)
Dimensions (L x W x H)7 x 6 x 10 cm
Weight150 grams
MaterialPlastic
ColorWhite
Mounting TypeWall Mount
Compatible DevicesSecurity systems, smart home hubs, lighting controls, or other systems designed to receive motion detector input.

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized Hikvision dealer or the Hikvision customer support directly. Keep your proof of purchase for warranty claims.

You can typically find support resources, FAQs, and contact information on the official Hikvision website.

© 2023 Hikvision Digital Technology. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.