DEERC 200E 1:10 Large 3S Brushless High Speed RC Car Instruction Manual

Introduction

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your DEERC 200E 1:10 Large 3S Brushless High Speed RC Car. Please read it thoroughly before first use to ensure optimal performance and longevity of your product.

What's in the Box

• DEERC 200E RC Car (1:10 Scale)
• 2 x 11.1V 1500mAh Li-ion Batteries
• 2 x USB Charging Cables
• Remote Controller (2.4Ghz)
• Brush for cleaning
• 2 x PVC Car Shells (different colors)
• Basic Tool Kit (screwdriver, wrench, spare pins/screws)
• Instruction Manual (this document)

Image: The DEERC 200E RC car with its remote control, two batteries, two charging cables, a cleaning brush, and an extra car shell, all laid out on a white surface.

Setup

1. Charging the Batteries

Before first use, fully charge both 11.1V 1500mAh Li-ion batteries using the provided USB charging cables. Connect the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter). The indicator light on the USB cable will show charging status (refer to the manual for specific light indicators).

Image: An illustration showing the two 3S large capacity batteries and USB charging cables, highlighting the 40+ minutes of driving time.

2. Installing Batteries in the RC Car

Carefully remove the car shell by detaching the body clips. Locate the battery compartment. Insert a fully charged battery and secure it with the battery holder. Connect the battery connector to the car's power port. Ensure connections are firm.

Image: A transparent view of the DEERC 200E RC car showing the internal battery placement and connections.

3. Installing Batteries in the Remote Controller

Open the battery compartment on the remote controller. Insert 3 AA batteries (not included), ensuring correct polarity. Close the compartment securely.

4. Pairing the Remote Controller

Turn on the RC car first, then turn on the remote controller. The indicator lights on both devices will flash and then become solid, indicating successful pairing. If pairing fails, turn off both devices and repeat the process.

Operating the DEERC 200E

The DEERC 200E features a 2.4Ghz proportional control system, allowing for precise speed, throttle, and steering adjustments. It is designed for all-terrain use, including grass, dirt, and sand.

Basic Controls

• Throttle Trigger: Pull to accelerate forward, push to brake/reverse.
• Steering Wheel: Turn left or right to steer the vehicle.
• Speed Switch: Adjust the maximum speed for different skill levels or terrains.
• Steering Trim: Fine-tune the steering to ensure the car drives straight.

Image: The DEERC 200E RC car is shown driving through water, kicking up dust, and navigating rocky terrain, demonstrating its 4WD all-terrain capabilities.

Performance Tips

• The 200E can reach speeds of 60+ KM/H (approximately 37+ MPH).
• Utilize the dual 11.1V 1500mAh batteries for extended playtime, offering up to 40+ minutes of driving fun.
• The realistic LED headlights are useful for nighttime operation.
• The independent suspension and durable metal components ensure a smooth ride and resilience on rough surfaces.

Maintenance

• Cleaning: Use the provided brush to remove dirt and debris from the chassis, wheels, and suspension components after each use. Avoid using water directly on electronic parts.
• Battery Care: Always fully charge batteries before storage and recharge them every 3 months if not in use to maintain battery health. Disconnect batteries from the car when not in use.
• Part Inspection: Regularly inspect the metal spur gears, differential, drive shafts, and shocks for any signs of wear or damage. Replace worn parts promptly to prevent further damage.
• Storage: Store the RC car and accessories in a cool, dry place away from direct sunlight and extreme temperatures.

Image: An exploded view of the DEERC 200E chassis, highlighting durable components like the protective steel sheet, 45A ESC, brushless motor, and TPR wearable tires.

Troubleshooting

• Car not responding: Ensure both car and remote are powered on and batteries are charged. Re-pair the remote controller if necessary.
• Reduced performance: Check battery charge level. Clean any debris from moving parts. Inspect for damaged gears or suspension components.
• Steering issues: Adjust the steering trim on the remote controller. Check for obstructions in the steering mechanism or damaged servo.
• Overheating: Allow the car to cool down after extended use. Avoid continuous high-speed driving without breaks.

Specifications

• Model: DEERC 200E
• Scale: 1:10
• Motor: 2845, 4-pole Brushless Motor (19240 RPM)
• ESC: 45A Brushless Waterproof ESC
• Top Speed: 60+ KM/H (37+ MPH)
• Battery: 2 x 11.1V 1500mAh Li-ion
• Run Time: Up to 40+ minutes (per 2 batteries)
• Control System: 2.4Ghz Proportional Radio Control
• Drive System: 4WD (Four-Wheel Drive)
• Shocks: Oil-filled Metal Shocks
• Chassis: Fully Metal Integrated Chassis with Protective Steel Sheet
• Weight: 5.51 pounds
• Dimensions: 14.2 x 11.8 x 5.91 inches

Safety Guidelines

• Always operate the RC car in open areas away from people, pets, and obstacles.
• Do not operate in wet conditions or near water unless the product is specifically rated as waterproof.
• Keep fingers, hair, and loose clothing away from moving parts.
• Adult supervision is recommended for users under 14 years of age.
• Do not modify the product as it may affect performance or safety.
• Always turn off the RC car and remote controller when not in use.

Warranty and Support

DEERC offers 24-hour after-sales service. For any issues or inquiries, please contact DEERC customer support through the official website or your purchase platform.

Refer to the original product packaging or official DEERC website for detailed warranty information.