Introduction
Thank you for choosing the Ledvion Vela M Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Image: The Ledvion Vela M outdoor wall light, featuring a classic black aluminum design and an E27 bulb, providing illumination.
Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Outdoor Use: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but should not be submerged in water.
- Bulb Type: Use only E27 bulbs with a maximum wattage of 60W. Ensure the bulb is fully screwed into the socket.
- Mounting: Ensure the mounting surface is structurally sound and can support the weight of the fixture. Use appropriate screws and wall plugs for the mounting material.
- Heat: Light fixtures can become hot during operation. Allow the fixture and bulb to cool before handling.
What's in the Box
Verify that all components are present before beginning installation:
Image: The package contents for the Ledvion Vela M wall light, showing the lamp, mounting hardware, and instruction manual.
- 1x Ledvion Vela M Wall Lamp
- 2x Screw Wall Plugs
- 2x Screws
- 1x Instruction Manual
Specifications
| Brand | Ledvion |
| Model Number | LVO10029 |
| Material | Aluminum |
| Color | Black |
| Dimensions (L x W x H) | 21.5 x 18.25 x 39.5 cm (approximate, refer to diagram) |
| Weight | 1.17 Kilograms |
| Socket Type | E27 |
| Max Wattage | 60 Watts |
| Voltage | 230 Volts |
| IP Rating | IP44 (Water & Dust Resistant) |
| Installation Type | Wall Mount |
Image: Dimensional drawing of the Ledvion Vela M wall light.
Setup and Installation
Follow these steps for proper installation:
- Preparation: Ensure the power supply to the installation area is turned off at the main circuit breaker. Gather necessary tools (drill, screwdriver, pencil, measuring tape).
- Marking: Hold the fixture's mounting plate against the desired wall location and mark the drilling points with a pencil.
- Drilling: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
- Wiring: Connect the electrical wires from the wall to the fixture's terminals. Ensure correct polarity (Live, Neutral, Earth) according to local regulations. Secure all connections.
- Mounting: Attach the fixture's mounting plate to the wall using the provided screws. Ensure it is securely fastened.
- Bulb Installation: Unscrew the protective cover of the lamp. Carefully screw an E27 bulb (max 60W) into the socket. Do not overtighten.
- Final Assembly: Reattach the protective cover securely.
- Testing: Restore power at the main circuit breaker and test the light fixture.
Image: Detail of the E27 socket, compatible with various E27 bulbs up to 60 Watts.
Image: Example of the Ledvion Vela M wall light installed on an exterior wall.
Operating Instructions
The Ledvion Vela M wall light operates by a standard electrical switch. Once installed and powered, simply use the connected wall switch to turn the light on or off. This fixture does not include an integrated motion sensor or dusk-to-dawn sensor, allowing you to choose your preferred E27 smart bulb or external sensor for advanced functionality.
Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Bulb Replacement: Ensure power is disconnected. Allow the bulb to cool completely. Unscrew the protective cover, then carefully unscrew the old E27 bulb and replace it with a new one (max 60W). Reattach the cover securely.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
Image: The Ledvion Vela M wall light is designed to be water and dust resistant (IP44 rated).
Troubleshooting
| Problem | Possible Cause | Solution |
| Light does not turn on. | No power supply, faulty bulb, loose wiring. | Check circuit breaker. Replace bulb. Inspect wiring (with power off). |
| Light flickers. | Loose bulb, incompatible bulb, unstable power. | Tighten bulb. Ensure bulb is compatible. Consult electrician for power issues. |
| Water inside fixture. | Improper sealing, damaged gasket, extreme weather. | Ensure protective cover is tightly sealed. Check gasket for damage. If persistent, consult electrician. |
Warranty and Support
The Ledvion Vela M Outdoor Wall Light comes with a 3-year warranty against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
Image: The Ledvion Vela M wall light is backed by a 3-year warranty, emphasizing its durable aluminum housing.
For warranty claims or technical support, please contact Ledvion customer service through the retailer where the product was purchased or visit the official Ledvion brand store online: Ledvion Brand Store.
