Introduction
Thank you for choosing the Adexa JC70 Wine Cooler. This premium wine cooler is designed to provide optimal storage conditions for your wine collection, ensuring a stable temperature and an elegant display. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before use and keep it for future reference.
Safety Information
To reduce the risk of fire, electric shock, or injury when using your wine cooler, follow these basic precautions:
- Read all instructions before using the appliance.
- Do not touch cold surfaces, especially when the appliance is operating.
- Ensure the appliance is properly grounded.
- Do not use abrasive cleaners or sharp objects to clean the interior.
- Keep ventilation openings clear of obstruction.
- Unplug the wine cooler before cleaning or performing any maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Overview
The Adexa JC70 Wine Cooler features a sleek black design with a digital control panel and compressor cooling technology. It is designed to store up to 24 standard wine bottles.
Figure 1: Front view of the Adexa JC70 Wine Cooler, showcasing its elegant black finish and glass door with visible wine bottles.
Figure 2: The Adexa JC70 Wine Cooler with its door open, revealing the interior shelving system designed for optimal bottle storage.
Key Features:
- Capacity: 24 standard wine bottles
- Cooling System: Compressor cooling for stable temperature
- Temperature Range: +5°C to +18°C (41°F to 64.4°F)
- Control: Digital control panel
- Design: Sleek black finish
- Certifications: CE / CB / RoHS / REACH / ETL
Setup
- Unpacking: Carefully remove all packaging materials. Keep the original packaging for future transport or storage.
- Placement: Place the wine cooler on a flat, stable surface away from direct sunlight and heat sources (e.g., oven, radiator). Ensure there is adequate ventilation around the unit (at least 10 cm / 4 inches clearance on sides and back).
- Leveling: Adjust the leveling feet at the bottom of the unit to ensure it is perfectly level. This is crucial for proper operation and door alignment.
- Power Connection: Plug the power cord into a dedicated, grounded electrical outlet. Do not use extension cords or adapters.
- Initial Operation: Allow the wine cooler to stand upright for at least 2-4 hours before plugging it in. This allows the refrigerant to settle. After plugging in, let the unit run empty for a few hours to reach the desired temperature before loading bottles.
Operating Instructions
Digital Control Panel:
The digital control panel is located on the top front of the unit. It allows you to set and monitor the internal temperature.
- Temperature Display: Shows the current internal temperature.
- Temperature Adjustment Buttons (Up/Down Arrows): Press to increase or decrease the desired temperature. The temperature range is +5°C to +18°C.
- Light Button: Controls the interior LED light. Press to turn on/off.
Loading Bottles:
- Arrange bottles on the shelves to allow for proper air circulation.
- Avoid overloading the shelves.
- Ensure the door closes completely after loading or removing bottles.
Maintenance
Cleaning:
- Interior: Unplug the unit. Clean the interior with a soft cloth and a solution of mild detergent and warm water. Rinse thoroughly and dry completely before plugging back in.
- Exterior: Wipe the exterior with a soft, damp cloth. For the glass door, use a glass cleaner.
- Condenser Coils: Periodically clean the condenser coils at the back or bottom of the unit with a soft brush or vacuum cleaner to ensure efficient operation.
Defrosting:
The wine cooler features an automatic defrost function. However, if excessive ice buildup occurs, manually defrost the unit by unplugging it and leaving the door open until the ice melts. Clean and dry the interior before restarting.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wine cooler does not operate. | No power supply. | Check if the power plug is properly inserted. Check the circuit breaker. |
| Temperature is not cold enough. | Door not closed properly; excessive door opening; poor ventilation; ambient temperature too high. | Ensure door is sealed; reduce door openings; ensure adequate clearance around unit; move unit to cooler location. |
| Vibrations. | Unit not level. | Adjust leveling feet. |
| Noise. | Normal compressor operation; loose parts. | This is normal. Check for any loose items inside or outside the unit. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Adexa |
| Model Number | JC70 |
| Color | Black |
| Item Weight | 21 kg |
| Volume Capacity | 63 Liters |
| Annual Energy Consumption | 142 Kilowatt hours per year |
| Noise Level | 42 dB |
| Manufacturer | Adexa |
| ASIN | B0982C5CCH |
| First Available Date | June 26, 2021 |
Warranty and Support
For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: Adexa
