Setup and Installation
Unboxing and Initial Inspection
Carefully unbox the unit. Ensure all parts listed in the packing contents are present and undamaged. The package should include the washer-dryer unit, drain hose, fill hose, and power cord.
Image: Equator All-In-One Washer-Dryer showing its compact dimensions (24.8"D x 23.5"W x 33.5"H) next to a human figure for scale.
Removing Shipping Rods
Before operating the appliance, it is crucial to remove the shipping rods located at the back of the unit. Failure to do so will cause excessive vibration and potential damage during operation. Use a 13mm spanner to loosen the shipping bolts, then tilt them up and remove the rods. Cover the holes with the provided hub caps.
Image: Rear view of the Equator Washer-Dryer highlighting the shipping rods that must be removed before use.
Video: An official setup and installation guide for the Equator EZ 5500 Washer-Dryer, demonstrating the removal of shipping rods and initial setup steps.
Leveling the Unit
Place the unit on a firm, level surface. Use the adjustable leveling feet at the bottom of the appliance to ensure it is perfectly balanced. An unbalanced unit can lead to excessive noise and vibration during operation.
Image: The Equator Washer-Dryer positioned in a modern laundry space, demonstrating typical placement options.
Water and Power Connections
Connect the cold and hot water inlet hoses securely to the corresponding water supply lines. Ensure the drain hose is properly positioned for water outlet into a sink or drain. Finally, plug the unit into a standard 110V power outlet. Ensure the power outlet is grounded.
Image: Detailed view of the rear connections of the washer-dryer, showing the water inlet and outlet points.
Operating Instructions
Control Panel Overview
The Equator All-In-One Washer-Dryer features an intuitive electronic touch control panel for easy operation. The color-coded LED display simplifies machine operation, providing clear indicators for selected cycles, time remaining, and other settings.
Image: Close-up of the electronic touch control panel, displaying various settings and cycle options.
Wash Cycles
The appliance offers 14 wash cycles to accommodate various fabric types and cleaning needs. These include:
- Normal
- Prewash (Heavy)
- Heavy
- ECO
- Quick 20
- Delicate
- Wool
- Quiet 60 dB
- Allergen
- Sanitize (74°C)
- PET Cycle
- Tub Clean
- Winterize
Select the appropriate cycle based on your laundry needs using the control dial.
Image: The washer-dryer unit with an overlay highlighting the available wash and dry cycles.
Drying Modes: Vented vs. Ventless
This unit offers both vented (hot air exhaust) and ventless (condensing) drying options. Vented drying is approximately 30% faster. To switch between modes, press the 'Dry Only' button and then hold the 'Vented/Ventless' button for 5 seconds until the desired mode indicator (fan symbol for vented, box with lines for ventless) appears on the display.
Image: A visual guide demonstrating how to set up the washer-dryer for either vented or ventless drying, showing the vent hose adapter and metal cover.
Video: This video provides a detailed walkthrough on how to set up and switch between vented and ventless drying modes on the Equator All-In-One Washer-Dryer, including visual cues on the control panel.
Special Features
The Equator All-In-One Washer-Dryer is equipped with several features designed to simplify your laundry routine and enhance performance:
- Oversuds Control: Automatically detects and reduces excessive sudsing.
- Self-Clean Cycle: A dedicated cycle to clean the drum and prevent odors.
- Protective Child Lock: Prevents unintended operation by children.
- Simple Delay Start: Allows you to set a delayed start time for cycles.
- 2 Min Winterize Cycle: A quick cycle to prepare the unit for cold weather or storage.
- Add a Sock: Pause the cycle to add forgotten items.
- Sanitize Cycle (74°C): Washes clothes at a high temperature to sanitize fabrics.
- Time Dry 60 min: A fixed 60-minute drying option.
- Refresh 12 min: A quick refresh cycle for lightly soiled items.
- Allergen Cycle: Designed to kill dust mites and other allergens.
- Sensor Dry: Automatically detects moisture levels and adjusts drying time.
Maintenance and Care
HE Detergent Use
Always use High-Efficiency (HE) detergent for optimal performance and to prevent oversudsing. The washer dispenser is designed for single-compartment HE detergent only. Using non-HE detergent can lead to excessive suds, poor washing results, and potential damage to the machine.
Coin Trap Cleaning
Regularly check and clean the easy-to-open coin trap located at the bottom front of the unit. This prevents blockages and ensures efficient drainage. Refer to the full user manual for detailed instructions on accessing and cleaning the coin trap.
Image: Front view of the Equator All-In-One Washer-Dryer, highlighting the location of the easy-to-open coin trap at the bottom right.
Self-Clean Cycle
Utilize the built-in Self-Clean cycle periodically to maintain the cleanliness of the drum and prevent odor buildup. This cycle helps remove detergent residue and other deposits.
Winterize Cycle
For periods of non-use or in cold climates where the unit might be exposed to freezing temperatures, use the quick 2-minute Winterize cycle. This cycle helps drain water from the system to protect the appliance from freezing and potential damage.
Troubleshooting
Common Issues and Solutions
| Issue | Possible Cause / Solution |
|---|---|
| Unit not spinning or "dancing" during operation. | Ensure all shipping rods have been completely removed from the back of the unit. Refer to the 'Removing Shipping Rods' section for detailed instructions. Also, verify the unit is perfectly level using the adjustable feet. |
| Clothes remain damp after drying. | Check if the correct drying mode (Vented or Ventless) is selected. Vented drying is generally faster. Ensure the vent hose is not kinked or blocked if using vented mode. For ventless mode, ensure the metal vent cover is properly installed. Also, avoid overloading the machine; smaller loads dry more efficiently. |
| Water spewing from the door. | Ensure the unit is level. An unbalanced machine can cause water leaks during the spin cycle. Also, check that the door is securely closed before starting a cycle. |
| Unpleasant odor in laundry. | Regularly run the Self-Clean cycle. Ensure you are using HE detergent and not overloading the machine. Leave the door slightly ajar after use to allow the drum to air out. |
| Error codes (e.g., E16, E5). | Refer to the official User Manual (PDF) for a comprehensive list of error codes and their specific troubleshooting steps. If the issue persists, contact customer support. |
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Equator |
| Model Info | EZ 5500 Yellow/Black |
| Item Weight | 190 Pounds |
| Product Dimensions (D x W x H) | 24.8" x 23.5" x 33.5" |
| Capacity | 1.9 Cubic Feet / 18 lbs |
| Voltage | 110 Volts |
| Maximum Rotational Speed | 1400 RPM |
| Laundry Appliance Drum Material | Porcelain Enamel |
| Number of Washing Cycles | 14 |
| Number of Drying Cycles | 7 (Sensor Dry, Time Dry 60 min, Refresh 12 min) |
| Special Features | Adjustable Leveling Legs, Child Lock, Compact, Oversuds Control, Self-Clean Cycle, Simple Delay Start, Winterize Cycle, Add a Sock, Sanitize Cycle, Allergen Cycle, Sensor Dry |
| Included Components | Drain Hose, Fill Hose, Power Cord |
| UPC | 747037179582 |
Warranty and Support
Warranty Information
For detailed warranty information regarding your Equator All-In-One Washer-Dryer, please refer to the official user manual provided with your appliance or visit the Equator website. Keep your proof of purchase for warranty claims.
Customer Support
For any technical assistance, troubleshooting, or inquiries not covered in this manual, please contact Equator customer support. You can also find additional information and resources by scanning the QR code located on the unit's control panel or by visiting the official Equator website.
Official User Manual: Download PDF
