HUAWEI B535-333 4G+ LTE Router User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your HUAWEI B535-333 4G+ LTE Router. This device is designed to provide high-speed internet access using 4G/4G+ LTE networks, offering robust Wi-Fi connectivity and multiple wired ports for your home or office.

The HUAWEI B535-333 supports LTE Advanced Category 7, enabling download speeds of up to 400 Mbps and upload speeds of up to 100 Mbps. It features dual-band Wi-Fi (2.4 GHz and 5 GHz) supporting up to 64 simultaneous devices, four Gigabit RJ45 ports (including one LAN/WAN port), and an RJ11 port for analog or DECT phones, allowing calls via the SIM card or VoIP/SIP accounts.

2. Product Overview

2.1 Package Contents

• 1 x HUAWEI B535-333 4G+ LTE Router
• 1 x Standard EU Power Adapter
• Quick Start Guide (if applicable, not explicitly mentioned but standard)

2.2 Device Layout

Figure 2.2.1: Front View - Shows the HUAWEI logo and LED indicators for signal strength, Wi-Fi, Ethernet, and Internet status.

Front Panel Indicators:

• Signal Strength LEDs: Three LEDs indicating the strength of the 3G/4G/4G++ network signal.
• Wi-Fi LED: Indicates Wi-Fi status (on/off, activity).
• Ethernet LED: Indicates Ethernet port activity.
• Internet Status LED: Indicates internet connection status.

Figure 2.2.2: Rear View - Displays the power input, Reset button, four RJ45 Gigabit ports (LAN1, LAN2, LAN3, LAN4/WAN), and one RJ11 phone port (TEL).

Rear Panel Ports and Buttons:

• Power Input: Connects to the power adapter.
• RESET Button: Used to restore factory settings.
• LAN Ports (RJ45): Four Gigabit Ethernet ports for wired connections. One port (LAN4/WAN) can also function as a WAN port.
• TEL Port (RJ11): For connecting an analog or DECT phone.
• SMA Connectors: Two connectors for external 4G antennas (not included).

Figure 2.2.3: Top View - Shows the Power On/Off button and the WPS button.

Top Panel Buttons:

• Power On/Off Button: To turn the device on or off.
• WPS Button: For quick and secure Wi-Fi connection setup.

Figure 2.2.4: Side View - Illustrates the slim profile of the router.

Figure 2.2.5: Angled Front View - Provides a perspective of the router's overall design.

3. Setup Guide

3.1 SIM Card Installation

1. Ensure the router is powered off.
2. Locate the nanoSIM card slot, typically found on the bottom or side of the device.
3. Insert the nanoSIM card into the slot with the gold contacts facing down and the notched corner aligned correctly. Push until it clicks into place.
4. Note: If your SIM card has a PIN, it is recommended to disable the PIN on a mobile phone before inserting it into the router for easier setup.

3.2 Power Connection

1. Connect the provided power adapter to the power input port on the rear of the router.
2. Plug the other end of the power adapter into a suitable electrical outlet.
3. Press the Power On/Off button on the top panel to turn on the router. The indicator lights will illuminate.

3.3 Initial Network Connection

Once powered on, the router will automatically attempt to connect to the 4G/4G+ network. The signal strength LEDs and Internet Status LED on the front panel will indicate the connection status.

• Wi-Fi Connection:
  1. On your computer or mobile device, search for available Wi-Fi networks.
  2. Select the Wi-Fi network name (SSID) displayed on the label at the bottom of the router.
  3. Enter the Wi-Fi password (Key) also found on the router's label.
• Wired Connection:
  1. Connect an Ethernet cable from one of the LAN ports (LAN1-LAN4) on the router to the Ethernet port on your computer or other network device.

4. Operating Instructions

4.1 Accessing the Web Management Interface

To configure advanced settings, access the router's web management interface:

1. Open a web browser (e.g., Chrome, Firefox, Edge).
2. In the address bar, type the router's default IP address (usually 192.168.8.1 or 192.168.1.1) and press Enter. The exact IP address can be found on the router's label.
3. Enter the username and password. The default credentials are often "admin" for both, but check the router's label for specific details.

From the web interface, you can manage Wi-Fi settings, network modes, connected devices, parental controls, and more. The interface supports multiple languages.

4.2 Wi-Fi Configuration

The router supports 802.11 a/b/g/n/AC Wi-Fi on both 2.4 GHz and 5 GHz bands, allowing up to 64 devices to connect simultaneously (32 on each band).

• Changing SSID and Password: Navigate to the Wi-Fi settings in the web interface to customize your network name and password for enhanced security.
• WPS Function: Press the WPS button on the top of the router and then the WPS button on your Wi-Fi device to quickly connect without entering a password.

4.3 Using the RJ11 Phone Port

The RJ11 port allows you to make and receive calls using the SIM card's number or by configuring a VoIP/SIP account.

1. Connect an analog or DECT phone to the RJ11 port on the router.
2. If using the SIM card for calls, ensure your SIM plan supports voice calls.
3. For VoIP/SIP, configure the account details within the router's web management interface under the telephony or VoIP settings.

4.4 External Antenna Connection

For improved 4G signal reception, you can connect external 4G antennas to the two SMA connectors on the rear of the router. This is particularly useful for optimizing signal strength and stability, especially when pointing towards a specific 4G tower.

4.5 Advanced Features

The router offers a comprehensive interface for advanced users, including:

• IP and MAC address reservation.
• Frequency selection for 4G bands.
• Router IP address change.
• DDNS (Dynamic Domain Name System) support.
• Integrated L2TP/PPTP VPN client.
• SMS reception and transmission support.
• Information page displaying Cell ID, RSRP, RSRQ, and SINR for external antenna alignment.

These features can be accessed and configured through the web management interface.

5. Maintenance

5.1 Firmware Updates

Periodically check for firmware updates through the router's web management interface. Keeping the firmware updated ensures optimal performance, security, and access to new features.

5.2 Cleaning the Device

Use a soft, dry cloth to clean the exterior of the router. Avoid using liquid cleaners or abrasive materials, as they may damage the device.

5.3 Optimal Placement

Place the router in an open area, away from obstructions, large metal objects, and other electronic devices that may cause interference. For best 4G signal reception, consider placing it near a window.

6. Troubleshooting

7. Specifications

8. Warranty and Support

8.1 Warranty Information

The HUAWEI B535-333 router comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the official HUAWEI customer support in your region. You may also find useful resources and FAQs on the official HUAWEI support website.

The Huawei Hi-Link (Mobile WiFi) application is available on the Apple App Store and Google Play Store, which can assist with managing your router.