LUXRITE LR23788

LUXRITE 5/6 Inch LED Square Recessed Lighting Instruction Manual

Model: LR23788

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUXRITE 5/6 Inch LED Square Recessed Lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference. These LED downlights are designed for both indoor and outdoor use, featuring selectable color temperatures and dimmable functionality.

LUXRITE 5/6 Inch LED Square Recessed Lighting fixture with E26 base adapter and color temperature switch

Image: A single LUXRITE 5/6 Inch LED Square Recessed Lighting fixture, showcasing its square design, integrated E26 base adapter, and the color temperature selection switch on the back. Multiple units are shown below.

Safety Information

  • WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
  • Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
  • Do not modify or alter the fixture. Any modifications may void the warranty and create safety hazards.
  • Ensure the supply voltage is compatible with the fixture (120 Volts).
  • Do not install with wet hands or while standing on wet surfaces.
  • This fixture is suitable for wet locations and IC (Insulation Contact) rated, meaning it can be in direct contact with insulation.

Components List

Each package contains the following items:

  • LUXRITE 5/6 Inch LED Square Recessed Lighting Fixture
  • E26 Base Adapter
  • Installation Manual

Setup and Installation

Follow these steps for proper installation:

  1. Turn Off Power: Before beginning any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
  2. Prepare Can Housing: Ensure your existing recessed can housing is compatible with 5 or 6-inch fixtures.
  3. Insert E26 Base Adapter: Screw the provided E26 base adapter into the can socket.
  4. Connect E26 Adapter: Connect the E26 adapter to the fixture's quick connect cable.
  5. Select Color Temperature: Before pushing the fixture into the ceiling, use the CCT (Correlated Color Temperature) switch located on the back of the fixture to select your desired light color. Options include 2700K (Warm White), 3000K (Soft White), 3500K (Natural White), 4000K (Cool White), and 5000K (Bright White).
  6. Push Downlight into Can: Carefully push the LED downlight fixture into the can housing until it is flush with the ceiling. The metal springs will secure it in place.
  7. Restore Power: Once installation is complete, restore power at the circuit breaker.
Four-step diagram showing the installation process for the recessed LED light.

Image: A visual guide demonstrating the four key steps for easy installation: inserting the E26 base adapter, connecting it to the fixture, selecting the color temperature, and pushing the downlight into the ceiling.

Color Temperature Selection

The fixture offers five selectable color temperatures to match your preference and room ambiance. The switch is located on the back of the fixture.

Kitchen scene demonstrating different color temperatures from 2700K to 5000K.

Image: A kitchen setting illustrating the visual difference between 2700K, 3000K, 3500K, 4000K, and 5000K light outputs from the recessed fixtures.

Video: This video demonstrates how to use the color temperature switch on the back of the LUXRITE recessed LED light to select between different Kelvin options, showing the immediate change in light output.

Operating Instructions

General Operation

Once installed and power is restored, the fixture will operate via your standard wall switch. The selected color temperature will remain set until manually changed using the switch on the fixture.

Dimming Functionality

These LED downlights are dimmable, allowing you to adjust the light output from 100% down to 10%. For optimal performance and to prevent flickering, use with compatible LED dimmers. Refer to the list of compatible dimmers below.

Table listing compatible dimmer models from Lutron, Leviton, and Eaton.

Image: A table detailing compatible dimmer models from various brands including Lutron, Leviton, and Eaton, ensuring proper dimming functionality.

Maintenance

The LUXRITE LED recessed lights require minimal maintenance. Follow these guidelines:

  • Cleaning: Ensure power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
  • No Bulb Replacement: These fixtures feature integrated LEDs with a long lifespan (up to 50,000 hours), eliminating the need for bulb replacement.
  • Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

Troubleshooting

If you encounter issues with your LUXRITE LED recessed lighting, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn onNo power supply
Loose connection
Incorrect wiring
Check circuit breaker/fuse
Verify all connections are secure
Consult a qualified electrician
Light flickers or dims inconsistentlyIncompatible dimmer switch
Loose wiring
Voltage fluctuations
Ensure dimmer is LED compatible (refer to list)
Check all electrical connections
Consult an electrician to check household voltage
Incorrect color temperatureCCT switch set incorrectlyAdjust the CCT switch on the back of the fixture to the desired setting

Specifications

Key technical specifications for the LUXRITE 5/6 Inch LED Square Recessed Lighting (Model LR23788):

FeatureSpecification
Model NumberLR23788
Size5/6 Inch
Wattage14 Watts (equivalent to 90W incandescent)
Brightness1100 Lumens
Voltage120 Volts
Color Temperature2700K, 3000K, 3500K, 4000K, 5000K (Selectable)
DimmableYes (100% to 10%)
CRI (Color Rendering Index)90
Lifespan50,000 Hours
RatingWet Rated, IC Rated, Energy Star, ETL Listed
ShapeSquare
Dimensions6.75 x 3.4 x 6.75 inches
MaterialMetal
Diagram showing the dimensions of the square recessed light fixture.

Image: A diagram illustrating the physical dimensions of the LUXRITE 5/6 Inch LED Square Recessed Lighting fixture, including its width, length, and depth.

Warranty

LUXRITE provides a 5-YEAR WARRANTY for this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the manufacturer's official warranty policy.

Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact LUXRITE customer support. Visit the official LUXRITE website for contact information or refer to the product packaging.

© 2024 LUXRITE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.