Introduction
Thank you for purchasing the Technical Pro FS3ST Portable Rechargeable Camping and Desk Fan. This versatile device combines a multi-speed fan, a super-bright LED work light, a torch flashlight, and solar charging capabilities, making it ideal for camping, home, office, and emergency use. This manual provides essential information for safe operation, setup, and maintenance of your device.
Safety Instructions
- Read all instructions before using the appliance.
- Do not immerse the unit in water or other liquids.
- Keep out of reach of children.
- Do not operate if the power cord or plug is damaged.
- Avoid placing fingers or objects into the fan blades or protective grille.
- Ensure the unit is placed on a stable, flat surface during operation.
- Do not expose the solar panel to extreme heat or direct sunlight for prolonged periods when not in use.
Package Contents
Please check the package for the following items:
- Technical Pro FS3ST Portable Rechargeable Fan Unit
- AC Power Cord (built-in)
- User Manual (this document)
Product Overview
Familiarize yourself with the different parts of your Technical Pro FS3ST fan.

Figure 1: Front and Back Panels of the FS3ST Fan. The front panel features the fan and control knobs, while the back panel shows the solar charging panel.

Figure 2: Key Features of the FS3ST Fan, including the solar panel, multi-speed fan, LED work light, and built-in AC plug.
The unit features a front-facing fan with control knobs, an adjustable LED work light at the top, and a torch flashlight on the side. The rear of the unit houses a solar charging panel.
Setup
Initial Charging
Before first use, it is recommended to fully charge the fan using the AC power source.
- Locate the built-in AC plug on the unit.
- Plug the AC cord into a standard 110-240V AC outlet.
- Allow 8-10 hours for a full charge. The charging indicator light (if present) will typically change color or turn off when fully charged.
Solar Charging
For outdoor use or when an AC outlet is unavailable, the integrated solar panel can charge the fan.
- Place the fan with the solar panel facing direct sunlight.
- Solar charging is slower than AC charging and is best for maintaining charge or for emergency power.
Operating Instructions
Fan Operation
The fan features multi-speed controls to adjust airflow.
- Locate the fan control knob on the front panel.
- Turn the knob clockwise to power on the fan and increase speed.
- Turn the knob counter-clockwise to decrease speed and turn off the fan.
LED Work Light Operation
The 30-bulb LED work lamp offers two brightness settings and an adjustable angle.
- Locate the LED light control button/knob (refer to product images for exact location).
- Press or turn to cycle through brightness settings (e.g., Low, High, Off).
- Adjust the angle of the LED panel to direct light as needed.

Figure 3: The LED work light providing illumination inside a tent.

Figure 4: Adjusting the angle of the LED work light.
Torch Flashlight Operation
The side-mounted LED torch flashlight provides a focused spot beam.
- Locate the torch flashlight on the side of the unit.
- Press the dedicated button (refer to product images for exact location) to turn the flashlight on or off.
Versatile Placement
The fan is designed for use in various environments.

Figure 5: The FS3ST fan in a tent, home, and office setting.
Maintenance
Cleaning
- Always unplug the unit before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces.
- Do not use abrasive cleaners or solvents.
- For the fan blades, use a soft brush or compressed air to remove dust.
Storage
- Store the fan in a cool, dry place when not in use.
- If storing for extended periods, charge the battery every 3-6 months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan/Lights not turning on | Battery is depleted. | Charge the unit using the AC adapter or solar panel. |
| Fan is weak or noisy | Low battery charge; Obstruction in fan blades. | Recharge the battery; Clean fan blades carefully after unplugging. |
| Solar charging is slow | Insufficient direct sunlight; Panel is dirty. | Ensure panel is in direct sunlight; Clean the solar panel. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | FS3ST |
| Brand | Technical Pro |
| Electric Fan Design | Table Fan |
| Power Source | AC, Solar |
| Product Dimensions (D x W x H) | 4.5"D x 12.5"W x 13"H |
| Special Features | Portable, Rechargeable, LED Work Light, Torch Lantern, Multi-Speed Fan |
| Recommended Uses | Travel, Camping, Home, Office, Emergency |
| Mounting Type | Desk Fan, Freestanding, Table Fan |
| Controller Type | Button Control |
| Voltage | 110-240 Volts (AC input) |
| Indoor/Outdoor Usage | Outdoor, Indoor |
| Blade Material | Plastic |
| Charging Time | 8-10 hours (AC) |

Figure 6: Product Dimensions.
Warranty and Support
Technical Pro products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Technical Pro website. If you encounter any issues or require technical assistance, please contact Technical Pro customer support.
Contact Information:
- Please refer to your product packaging or the official Technical Pro website for the most current contact details.