REMOTE Outdoorsman 2400 Lumen Flashlight

Introduction

This manual provides detailed instructions for the safe and effective use of your REMOTE Outdoorsman 2400 Lumen Flashlight, model PVL-FLT-0009. Please read this manual thoroughly before operating the device and retain it for future reference.

The REMOTE Outdoorsman 2400 is a high-intensity flashlight designed for outdoor use, offering 2400 lumens of brightness, a beam throw of over 400 meters, and IP67 waterproof and dust-proof ratings.

Safety Information

To ensure safe operation and prevent damage to the flashlight or injury, please observe the following precautions:

• Do not look directly into the light beam. The high intensity light can cause temporary vision impairment or permanent eye damage.
• Keep out of reach of children.
• Use only recommended battery types (Lithium Ion). Incorrect battery types may cause damage or present a fire hazard.
• Do not attempt to disassemble or modify the flashlight. This will void the warranty and may cause damage.
• Ensure battery compartment is sealed properly before exposing to water to maintain IP67 waterproof rating.
• Dispose of batteries according to local regulations.

Package Contents

Verify that all items are present in the package:

• REMOTE Outdoorsman 2400 Lumen Flashlight (Model: PVL-FLT-0009)
• User Manual (this document)
• Note: Batteries are not included and must be purchased separately.

Image shows the REMOTE Outdoorsman 2400 Lumen flashlight, black in color, displayed within its retail packaging. The packaging highlights key features such as '2400 LUMENS', 'IP67 WATERPROOF', '16X ZOOM FROM FLOOD TO SPOT LIGHT', and '5 LIGHT MODES: HIGH - MEDIUM - LOW - STROBE - BEACON'.

Setup: Battery Installation

The REMOTE Outdoorsman 2400 Flashlight requires Lithium Ion batteries (not included).

1. Unscrew the tail cap of the flashlight by turning it counter-clockwise.
2. Insert the Lithium Ion battery(ies) into the battery compartment with the positive (+) terminal facing towards the flashlight head.
3. Carefully screw the tail cap back on by turning it clockwise until it is securely tightened. Ensure the O-ring is properly seated to maintain the waterproof seal.

Operating Instructions

Power On/Off

• To turn the flashlight ON, press the advanced soft touch button located on the body of the flashlight.
• To turn the flashlight OFF, cycle through all light modes until the flashlight turns off, or press and hold the button for approximately 2 seconds.

Light Mode Selection

The flashlight features 5 light modes. With the flashlight ON, short press the soft touch button to cycle through the modes in the following order:

• High: Maximum brightness (2400 Lumens)
• Medium: Moderate brightness
• Low: Minimum brightness for extended run time
• Strobe: Flashing light for signaling or disorientation
• Beacon: Slow, intermittent flash

Zoom Function (Flood to Spot Light)

The flashlight features a 16x zoom function to adjust the beam from a wide floodlight to a focused spotlight.

• To adjust the beam, gently slide the head of the flashlight forward or backward.
• Sliding the head forward will narrow the beam into a spotlight.
• Sliding the head backward will widen the beam into a floodlight.

Maintenance

Cleaning

• Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Clean the lens gently with a lens cleaning cloth to avoid scratches.

Battery Care

• Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
• Store batteries in a cool, dry place.

Storage

• Store the flashlight in a cool, dry environment, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the manufacturer's official website or contact their customer service directly. The warranty details are subject to the terms and conditions provided by REMOTE.

Please retain your proof of purchase for any warranty claims.