Important Safety Information
Read all instructions carefully before installation and use. Save this manual for future reference.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker before installation or servicing.
- All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Ensure the fixture is securely mounted to a structural component of the ceiling.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all parts are present before beginning installation.
- Linear Chandelier Fixture (1)
- Ceiling Canopy (1)
- Mounting Hardware Kit (1)
- 12-inch Rods (6)
- 6-inch Rod (1)
- G30 (E26) Bulbs (6)
Image: All components included in the package for the Edvivi Linear Kitchen Island Pendant Chandelier.
Specifications
| Feature | Detail |
|---|---|
| Fixture Dimensions | 30 in. W x 2.75 in. D x 2.75 in. H |
| Ceiling Canopy Dimensions | 9 in. W x 4 in. D x 1 in. H |
| Maximum Hanging Height | 50.75 in. |
| Bulb Type | G30 (E26) |
| Max Wattage per Bulb | 60 Watts |
| Number of Lights | 6 |
| Dimmable | Yes (with compatible dimmer switch and bulbs) |
| Material | Wood, Brushed Nickel |
| Voltage | 120 Volts |
Image: Technical drawing showing the dimensions of the chandelier fixture and canopy.
Setup and Installation
Before You Begin: Ensure power is disconnected at the circuit breaker. It is recommended to have two people for installation.
- Prepare Mounting: Attach the mounting bracket (included in hardware kit) to the junction box in the ceiling. Ensure it is securely fastened.
- Adjust Hanging Height: Determine the desired hanging height. The chandelier includes two sets of three 12-inch rods and one 6-inch rod. Combine these rods as needed to achieve the desired length. The maximum height is 50.75 inches. Attach the chosen rods to the fixture and the ceiling canopy.
- Wire Connections: Carefully connect the fixture's electrical wires to the house wires according to standard electrical codes (typically black to black, white to white, and ground to ground). Use wire nuts (included) to secure connections.
- Mount Canopy: Carefully push the ceiling canopy up to the ceiling, aligning the mounting screws with the holes in the canopy. Secure the canopy in place with the decorative nuts.
- Install Bulbs: Screw the six G30 (E26) bulbs into the sockets on the fixture. Do not overtighten.
- Restore Power: Once installation is complete, restore power at the circuit breaker and test the fixture.
Image: Close-up view of the brushed nickel ceiling canopy and adjustable hanging rods.
Image: Detailed view of the chandelier's light sockets with G30 bulbs installed.
Operating Instructions
The Edvivi Linear Kitchen Island Pendant Chandelier operates via a standard wall switch or a compatible dimmer switch.
- Turning On/Off: Use the wall switch connected to the fixture to turn the lights on or off.
- Dimming Function: If a dimmer switch is installed and compatible dimmable bulbs are used, adjust the dimmer switch to control the light intensity.
Maintenance
Regular cleaning will help maintain the appearance of your lighting fixture.
- Cleaning: Disconnect power before cleaning. Use a dry, soft cloth or duster to clean the fixture. Avoid using harsh chemicals, abrasive cleaners, or polishes, as these may damage the finish.
- Bulb Replacement: Disconnect power before replacing bulbs. Allow bulbs to cool completely. Unscrew old bulbs and replace with new G30 (E26) bulbs, ensuring they do not exceed 60 watts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off at circuit breaker. 2. Loose wire connections. 3. Faulty bulb. | 1. Check circuit breaker and wall switch. 2. Verify all wire connections are secure (with power off). 3. Replace bulb. |
| Light flickers | 1. Loose bulb. 2. Incompatible dimmer switch/bulbs. 3. Loose wire connection. | 1. Tighten bulb. 2. Ensure dimmer and bulbs are compatible. 3. Check wire connections (with power off). |
| Humming sound | Incompatible dimmer switch. | Replace dimmer switch with one compatible with LED/incandescent bulbs. |
Warranty and Support
This Edvivi lighting fixture comes with a 1-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship.
For warranty claims or technical support, please contact Edvivi Lighting customer service. Keep your proof of purchase for warranty validation.
Contact Information: Refer to the Edvivi Lighting website or your purchase documentation for current contact details.
