Dorcy Ultra HD Series 450L USB Rechargeable Worklight Instruction Manual

1. Product Overview

The Dorcy 450 Lumen Flex COB Rechargeable Work Light and LED Tip Inspection Flashlight is a versatile lighting tool designed for various tasks. It features a magnetic swivel base and a work light that folds out to direct illumination precisely where needed. The flashlight includes a dimmable power switch and a battery power indicator for convenience. Its heavy-duty magnetic base and foldaway hang hook provide 180° rotatable light for hands-free operation.

Key Features:

• 450 lumens output.
• Combination flashlight with dimmable power switch and wider area light for multipurpose use.
• Heavy-duty magnetic base and foldaway hang hook provides 180° of rotation and various mounting options for hands-free use.
• Work light folds out to focus light wherever it's needed.
• Water-resistant (IPX4) design.

2. Product Components

Side view of the worklight, highlighting the power button and the covered USB charging port.

The worklight with its COB (Chip On Board) light panel extended, providing broad illumination.

A close-up view of the LED inspection flashlight located at the tip of the device.

Detail of the USB charging port with its protective cover open, showing the battery level indicator lights.

3. Setup

Initial Charging:

1. Before first use, fully charge the worklight.
2. Locate the USB charging port, typically covered by a protective flap.
3. Connect the provided USB charging cable to the worklight and a suitable USB power source (e.g., wall adapter, computer USB port).
4. The battery indicator lights will illuminate to show charging progress. All lights will be solid when fully charged.

4. Operating Instructions

Power On/Off and Mode Selection:

• Press the power button once to turn on the inspection flashlight.
• Press the power button a second time to switch to the COB work light.
• Press the power button a third time to turn off the device.

Dimmable Feature:

• While the COB work light is on, press and hold the power button to activate the dimming function.
• Release the button when the desired brightness level is reached.

Using the Magnetic Base and Hang Hook:

• The heavy-duty magnetic base allows attachment to metallic surfaces for hands-free operation.
• The integrated foldaway hang hook can be deployed to suspend the worklight, offering versatile positioning.
• The light head can rotate 180° to direct illumination as needed.

Power Bank Function:

• The worklight can be used as a power bank to charge other USB-powered devices.
• Connect your device's charging cable to the USB output port on the worklight.
• Ensure the worklight has sufficient battery charge to power your external device.

5. Charging

The Dorcy 450L Worklight is equipped with a built-in Lithium Ion battery and is USB-C rechargeable. A USB charging cord is included.

Charging Process:

1. Open the protective cover of the USB port.
2. Insert the USB-C end of the charging cable into the worklight's input port.
3. Connect the other end of the cable to a standard USB power adapter (not included) or a powered USB port.
4. The battery indicator lights will show the charging status. A full charge is indicated when all lights are solid green.

6. Maintenance

Cleaning:

• Wipe the exterior of the worklight with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.

Storage:

• Store the worklight in a cool, dry place away from direct sunlight.
• For prolonged storage, ensure the battery is partially charged (around 50%) to maintain battery health. Recharge every 3-6 months.

Water Resistance:

• The worklight is rated IPX4 water-resistant, meaning it is protected against splashing water from any direction.
• It is not designed for submersion in water.

7. Troubleshooting

Light Not Turning On:

• Check Battery: Ensure the battery is charged. Connect to a power source and observe the battery indicator lights.
• Power Button: Press the power button firmly. Try pressing multiple times to cycle through modes.

Not Charging:

• Cable Connection: Verify that the USB charging cable is securely connected to both the worklight and the power source.
• Power Source: Ensure the USB power source is functional. Try a different USB port or wall adapter.
• Cable Integrity: Inspect the charging cable for any damage. Try using a different USB-C charging cable if available.

8. Specifications

9. Warranty and Support

Warranty Information:

This Dorcy product comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized modification, or neglect.

Customer Support:

For technical assistance, warranty claims, or product inquiries, please visit the official Dorcy website or contact their customer service department. Refer to the product packaging or the official Dorcy website for the most current contact information.