1. Introduction
Thank you for choosing the Medic Therapeutics Air Purifier with UV Light. This device is designed to improve indoor air quality by filtering out airborne contaminants. Please read this manual thoroughly before operation to ensure proper use and maintenance.
2. Important Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:
- Always unplug the air purifier before moving, cleaning, or replacing the filter.
- Do not operate the unit with a damaged cord or plug.
- Keep the power cord away from heated surfaces.
- Do not use the air purifier in areas with high temperature or humidity.
- Do not insert fingers or foreign objects into any openings.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
3. Package Contents
- Medic Therapeutics Air Purifier with UV Light
- AC/DC Adapter
- Activated Carbon HEPA H13 Filter (pre-installed or separate)
- User Manual (this document)
4. Product Overview
The Medic Therapeutics Air Purifier features a compact design and a multi-stage filtration system to provide cleaner air.

Image 1: Front view of the Medic Therapeutics Air Purifier. The device is cylindrical, silver-colored, with a perforated lower section for air intake and a control panel on top.
Key Features:
- High Efficiency Five-Stage Filtration System: Includes a fine preliminary filter, HEPA H13 filter, Activated Carbon filter, UVC light, and negative ion generator. This system captures and removes up to 99.97% of airborne contaminants.
- UVC Disinfection Light: Built-in 253.7nm O-Zone Free UVC light for enhanced sanitization.
- Multiple Fan Speeds: Low, Mid, High, Sleep, and Auto modes.
- Timing Adjustment: Timer function from 1 to 8 hours.
- Auto-Mode: Intelligent sensors detect air quality and automatically adjust the fan speed.
- Ultra-Silent Operation: Low noise generation, ideal for bedrooms.
- Advanced Filter Replacement Reminder: Notifies when filter change is needed.
- Touch Control: Intuitive touch panel for easy operation.
5. Setup
- Unpack the Device: Carefully remove the air purifier and all accessories from the packaging.
- Check Filter Installation: The HEPA H13 filter may be pre-installed or require installation.

Image 2: The air purifier with its base removed, revealing the cylindrical filter. The filter is shown separately next to the unit, ready for installation or replacement.
- If the filter is wrapped in plastic, remove the plastic packaging before installation.
- To access the filter compartment, gently twist and remove the bottom cover of the air purifier.
- Insert the filter into the compartment, ensuring it is seated correctly.
- Replace the bottom cover and twist to secure it.
- Position the Air Purifier: Place the unit on a flat, stable surface. Ensure there is adequate space (at least 15 cm or 6 inches) around the air intake and outlet for optimal airflow. Avoid placing it near heat sources or in direct sunlight.
- Connect Power: Plug the AC/DC adapter into the power port on the air purifier, then plug the adapter into a standard electrical outlet.
6. Operating Instructions
The control panel is located on the top of the air purifier and features touch-sensitive buttons.

Image 3: A user interacting with the touch control panel located on the top surface of the silver air purifier.
Power On/Off:
- Press the Power button to turn the unit on or off.
Fan Speed Adjustment:
- Press the Fan Speed button repeatedly to cycle through Low, Mid, High, and Sleep modes.
- Sleep Mode: In this mode, the fan operates at its lowest speed, and the control panel lights are dimmed to minimize disturbance during sleep.
Auto-Mode:
- Press the Auto button to activate Auto-Mode. The intelligent sensors will detect the surrounding air quality and automatically adjust the fan speed.
Timer Function:
- Press the Timer button repeatedly to set the operating time for 1, 2, 3, 4, 5, 6, 7, or 8 hours. The unit will automatically turn off after the set time.
UVC Light Control:
- The UVC light operates automatically when the unit is on. Refer to the product specifications for details on UVC operation.
7. Maintenance
Filter Replacement:
The air purifier is equipped with an advanced filter replacement reminder. When the filter needs to be replaced, an indicator light on the control panel will illuminate.
- It is recommended to replace the HEPA H13 filter approximately every 6-12 months, depending on usage and air quality.
- To replace the filter:
- Unplug the air purifier from the power outlet.
- Gently twist and remove the bottom cover of the unit.
- Remove the old filter.
- Insert a new Medic Therapeutics HEPA H13 filter (ensure plastic packaging is removed).
- Replace the bottom cover and twist to secure it.
- Plug the unit back in. The filter replacement indicator should reset automatically. If not, consult the troubleshooting section.
Cleaning the Unit:
- Always unplug the air purifier before cleaning.
- Wipe the exterior surfaces of the unit with a soft, dry cloth.
- Do not use abrasive cleaners, waxes, or solvents.
- Do not immerse the unit in water or allow water to enter the interior.
- The preliminary filter can be gently vacuumed to remove larger dust particles between replacements.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. |
|
|
| Airflow is weak or noisy. |
|
|
| Filter replacement indicator remains on after changing filter. |
|
|
| Unusual odor from the unit. |
|
|
9. Specifications
| Brand: | Medic Therapeutics |
| Model Number: | MT-AIRPURIF-001-SIL |
| Product Dimensions: | 1 x 1 x 1 cm (approximate, as per product data) |
| Item Weight: | 2.51 Kilograms |
| Noise Level: | 0.03 Decibels (Ultra-Silent) |
| Power Source: | Corded Electric |
| Control Method: | Touch |
| Filter Type: | HEPA H13, Activated Carbon, UV Light |
| Coverage Area: | Up to 250 square feet (sanitizes in 30 minutes) |
| UVC Wavelength: | 253.7nm (O-Zone Free) |
| Country of Origin: | China |
10. Warranty and Support
Medic Therapeutics products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement filters, please refer to the contact information provided with your purchase documentation or visit the official Medic Therapeutics website.
Please retain your proof of purchase for warranty claims.