1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Goton Waterproof Case for Apple Watch. This case is designed to offer comprehensive protection for your device, safeguarding it against daily wear, impacts, and water exposure.
2. Product Overview
The Goton Waterproof Case is engineered to protect your Apple Watch while maintaining full functionality. Key features include:
- Compatibility: Specifically designed for Apple Watch Series 6/5/4 44mm, SE 3 44mm (2025), and SE 2/1 44mm. (Note: Watch and band are not included).
- Waterproof Design: Features an upgraded waterproof seal to protect against daily water splashes and fogging. Not suitable for deep water activities like surfing or swimming.
- Extreme Protection: Constructed with high-grade matte PC material and a 9H tempered glass screen protector to shield against scratches, cracks, and impacts.
- Easy Installation & Removal: Designed for hassle-free attachment and detachment, allowing for convenient charging without removing the case.
- High Responsiveness: Maintains original touch sensitivity for seamless interaction with your Apple Watch.
Image: Goton Waterproof Case for Apple Watch, showcasing its water-resistant design.
3. Compatibility Check
Before installation, please confirm your Apple Watch model and size. This case is compatible with Apple Watch Series 6/5/4 44mm, SE 3 44mm (2025), and SE 2/1 44mm. The size is typically indicated on the back of your watch.
Image: Visual guide on locating the 44mm size marking on the back of an Apple Watch.
4. Setup and Installation
Follow these steps to properly install the Goton Waterproof Case onto your Apple Watch:
- Clean Your Watch: Use the provided cleaning kit (wipes and cloth) to thoroughly clean the screen and sides of your Apple Watch. Ensure there is no dust, smudges, or moisture.
- Prepare the Case: Gently remove any protective films from both the inside and outside of the case's tempered glass screen protector.
- Align and Install: Align the case with your Apple Watch. Ensure the buttons and cutouts on the case match those on your watch. Gently press the case onto the watch until it snaps securely into place.
- Verify Fit: Check that the case is flush with the watch and that all edges are sealed. Test the buttons and touch screen responsiveness.
Installation Video Guide:
Video: Step-by-step guide on how to install the waterproof case onto an Apple Watch.
Removal Video Guide:
Video: Instructions on how to safely remove the Goton 2-in-1 Waterproof Case from your Apple Watch.
5. Operating Instructions
Once installed, your Goton Waterproof Case allows for normal operation of your Apple Watch with enhanced protection.
- Touch Sensitivity: The integrated tempered glass screen protector is designed to maintain high touch sensitivity, allowing you to interact with your watch screen as usual.
- Button Access: Precise cutouts ensure full access to all buttons, sensors, and the digital crown.
- Wireless Charging: The case is designed to allow for direct wireless charging without needing to remove it.
- Water Protection: The upgraded waterproof design protects your watch from daily splashes, rain, and sweat. However, it is not recommended for deep water activities such as swimming, diving, or surfing, as prolonged submersion or high water pressure may compromise the seal.
Image: Demonstrates the ultra HD clear display and high touch response of the case.
Waterproof Demonstration:
Video: Shows the Goton Waterproof Case protecting an Apple Watch during hand washing, highlighting sensitive touch screen functionality.
6. Maintenance
To ensure the longevity and effectiveness of your Goton Waterproof Case, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the case and your Apple Watch with a soft, damp cloth. Avoid harsh chemicals or abrasive materials that could damage the case or screen.
- Inspect for Damage: Regularly inspect the case for any signs of wear, cracks, or damage, especially around the seals. If damage is found, replace the case to ensure continued protection.
- Avoid Extreme Conditions: While waterproof for daily use, avoid exposing the case to extreme temperatures or prolonged direct sunlight, which could affect its material integrity.
7. Troubleshooting
If you encounter any issues with your Goton Waterproof Case, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced Touch Sensitivity | Dust or moisture between case and screen; improper installation. | Remove the case, clean both surfaces thoroughly, and re-install ensuring a tight fit. |
| Water Trapped Under Case | Improper installation; case damage; exposure to excessive water pressure. | Remove the case, dry the watch and case completely. Re-install carefully. If the case is damaged, replace it. Avoid deep water activities. |
| Buttons Unresponsive | Misalignment of the case. | Remove and re-install the case, ensuring precise alignment of all cutouts and buttons. |
8. Specifications
- Product Dimensions: 1.97 x 1.77 x 0.5 inches
- Item Weight: 0.317 ounces
- Material: High-grade matte PC, 9H tempered glass
- Color: Black
- Form Factor: Case
- Special Features: Screen Protector, Waterproof (daily use)
- Compatible Devices: Apple Watch SE 3/2/1, Series 6/5/4 44mm
9. Warranty and Support
Should you encounter any defects or quality concerns with your Goton Waterproof Case, please reach out to us promptly for a resolution. Our customer support team aims to provide a response within 24 hours.
