WALI Universal TV Stand TVS001-W Instruction Manual

Introduction

Thank you for choosing the WALI Universal TV Stand TVS001-W. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV stand. Please read these instructions thoroughly before assembly and retain them for future reference.

Important Safety Information

WARNING: Read all instructions before assembly. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Check for missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose not explicitly specified by WALI.

• Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
• Do not exceed the maximum weight capacity of 110 lbs (50 kg).
• This product is designed for TVs between 22 and 65 inches.
• Verify VESA compatibility: 75x75mm to 800x500mm.
• Always use the provided hardware. If any parts are missing or defective, contact WALI customer service.
• Keep children away from the assembly area during installation.

Package Contents

Please ensure all parts are present and undamaged before proceeding with assembly. Refer to the parts list in your physical manual for detailed component identification.

Setup and Installation

The WALI Universal TV Stand TVS001-W is designed for easy two-step installation. All required hardware is provided.

Step 1: Assemble the Base and TV Bracket

Attach the vertical support columns to the base feet using the provided screws. Ensure they are securely fastened. The stand features detachable parts to fit small TVs and offers 2 levels of height adjustment for better viewing flexibility.

Image: The WALI Universal TV Stand (TVS001-W) supporting a television, highlighting its compatibility with TVs from 22 to 65 inches, a maximum weight capacity of 110 lbs (50 kg), and VESA sizes up to 800x500mm.

Image: Close-up details of the TV stand's features, including detachable parts for smaller TVs, two-level height adjustment, decorative plastic covers for aesthetics, and extensive non-slip pads on the base for stability and floor protection.

Image: Illustration demonstrating the two-level height adjustment feature of the WALI TV Stand, allowing the television to be positioned between 18 inches and 27.5 inches from the tabletop for optimal viewing.

Step 2: Attach the TV Bracket to the TV

Carefully attach the assembled bracket to the back of your television using the appropriate screws and spacers from the provided hardware kit. Ensure the VESA mounting holes on your TV align with the bracket. It is recommended to have assistance when lifting and attaching the TV to prevent damage or injury.

Image: A diagram illustrating the wide range of VESA mounting patterns supported by the WALI TV Stand, including common sizes like 75x75mm, 100x100mm, 200x200mm, up to 800x500mm, ensuring broad compatibility with various TV models.

Note: Some TVs may have speakers or other protrusions on the back that require careful alignment or the use of additional spacers. Always ensure a secure and stable fit.

Cable Management

The stand is designed to help manage cables for a clean setup. Utilize the integrated cable management features to route and conceal TV and device cables.

Operating Instructions

Once assembled, the WALI Universal TV Stand provides a stable platform for your television. The primary operational feature is its height adjustment.

Height Adjustment

The TV stand offers two levels of height adjustment, allowing you to customize the viewing height of your television between 18 and 27.5 inches. To adjust the height, you may need to partially loosen the screws connecting the vertical support columns to the TV bracket, reposition the bracket to the desired height, and then securely tighten all screws. Always ensure the TV is stable after any adjustments.

Maintenance

To ensure the longevity and safety of your WALI TV Stand:

• Regularly check all screws and connections to ensure they remain tight and secure.
• Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Do not place heavy objects on the stand's feet or base that could compromise stability.

Troubleshooting

If you encounter issues during assembly or use, please refer to the following common solutions:

• Difficulty with screw sizes: The kit includes an assortment of bolts, washers, and spacers. If the provided screws do not fit your TV's VESA holes, consult your TV's manual for recommended screw specifications. Additional spacers may be needed for TVs with curved backs or protrusions.
• Stand feels unstable: Ensure all screws are tightened securely. Verify that the TV's weight and size are within the stand's specified limits. The non-slip pads on the base should be making full contact with the surface.
• Left/Right orientation confusion: The "L" and "R" markings on the stand components refer to the left and right sides when viewing the TV from the front. Ensure components are oriented correctly during assembly.
• TV not sitting flush: Check for any obstructions or misaligned components. Ensure the TV's VESA mounting points are clear and the stand's arms are correctly positioned.

If problems persist, contact WALI customer support for further assistance.

Specifications

Official Product Videos

Watch these official videos for additional guidance on the WALI Universal TV Stand TVS001-W.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official WALI website. WALI is committed to enhancing your viewing experience and living space aesthetics.

You can also visit the WALI Store on Amazon for more products and information.