1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Vivi Electric Skateboard, Model H2S-2. Please read this manual thoroughly before first use to ensure proper handling and to maximize the lifespan of your product.
The Vivi Electric Skateboard is designed for recreational use by individuals who meet the specified weight and age requirements. It features a durable, one-piece body structure, a 350W brushless motor, and a wireless remote control for an intuitive riding experience.
2. Package Contents
Upon opening the package, please verify that all components are present and in good condition. If any items are missing or damaged, contact customer service immediately.
- Vivi Electric Skateboard (Model H2S-2)
- Wireless Remote Control
- Charger
- Multifunction T-Tool
- User Manual
- Warranty Extension Guide

Figure 2.1: Vivi Electric Skateboard with remote, T-tool, charger, and manuals.
3. Safety Guidelines
WARNING: The Vivi Electric Skateboard is not a toy. Always prioritize safety when operating this product.
- Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and wrist guards.
- Operate the skateboard only on flat, paved surfaces free from obstacles, debris, and traffic.
- Do not ride in wet conditions, on uneven terrain, or at night without proper lighting.
- Ensure the battery is fully charged and the remote control is paired before each ride.
- Adhere to local laws and regulations regarding electric skateboard use.
- Do not exceed the maximum load capacity of 155 lbs (70 kg).
4. Setup
4.1 Initial Charging
Before first use, fully charge the skateboard's battery. The 29.4V 2000mAh battery typically charges within 2 hours.
- Connect the charger to a standard power outlet.
- Plug the charging cable into the skateboard's charging port.
- The indicator light on the charger will change to indicate charging status (e.g., red for charging, green for fully charged).

Figure 4.1: Illustration of battery capacity and charging time.
4.2 Remote Control Pairing
The remote control is pre-paired with the skateboard. After the first manual pairing, the machine will automatically pair on subsequent uses.
- Ensure both the skateboard and the remote control are powered off.
- Turn on the skateboard by long-pressing the power button for 5 seconds or sliding to power on.
- Turn on the remote control.
- Press the "Match Button" on the remote control (refer to Figure 4.2). The remote and skateboard should connect automatically.

Figure 4.2: Wireless Remote Control layout, showing Speed Switch, USB Charging Port, Match Button, and Direction Switch.
5. Operating Instructions
5.1 Powering On/Off
- To power on the skateboard: Long press the power switch for 5 seconds or slide the board to activate.
- To power off the skateboard: It will automatically shut down after 5 minutes of inactivity.

Figure 5.1: Powering on the skateboard by long pressing the switch or sliding.
5.2 Speed Modes
The Vivi Electric Skateboard offers 3 speed modes, suitable for various skill levels, especially beginners. Use the speed switch on the remote control to adjust.
- Low Speed: Approximately 6.2 MPH (10 KM/H)
- Medium Speed: Approximately 9.3 MPH (15 KM/H)
- Max Speed: Up to 12.4 MPH (20 KM/H)
Video 5.1: Demonstration of the Vivi Electric Skateboard's 3 speed modes and remote control functionality.
5.3 Acceleration and Braking
Use the acceleration/brake switch on the remote control to manage your speed and stop safely.
- Push the switch forward to accelerate.
- Pull the switch backward to brake. The steady brake system ensures controlled deceleration.

Figure 5.2: Rider demonstrating control and smooth operation of the skateboard.
5.4 Direction Control
The remote control allows for flexible turning and reversing.
- Use the direction switch (forward/backward key) to change the board's direction.
- Lean your body to steer the skateboard during turns.
6. Maintenance
6.1 General Care
- Keep the skateboard clean and dry. Wipe down the deck and wheels after each use.
- Store the skateboard in a cool, dry place away from direct sunlight and extreme temperatures.
- Regularly inspect the wheels, trucks, and deck for any signs of wear or damage.
6.2 Wheel Maintenance
The 72mm detachable PU wheels are designed for durability and shock absorption. They can be replaced if worn.

Figure 6.1: Detachable wheel design for easy maintenance.
6.3 Griptape Care
The non-slip emery griptape provides secure footing. Keep it clean to maintain its effectiveness.

Figure 6.2: The non-slip emery griptape ensures rider stability.
7. Troubleshooting
If you encounter issues with your Vivi Electric Skateboard, refer to the table below for common problems and solutions. If the problem persists, contact customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Skateboard not turning on | Low battery; Power button not pressed long enough | Charge the battery; Press and hold the power button for 5 seconds. |
| Remote not controlling skateboard | Remote not paired; Remote battery low | Re-pair the remote (Section 4.2); Charge the remote control. |
| Reduced range or speed | Low battery; Overload; Riding uphill | Fully charge the battery; Ensure rider weight is within limits; Ride on flat surfaces. |
| Unusual noises from wheels/motor | Debris in wheels; Loose components | Clean wheels and motor area; Tighten any loose screws using the T-tool. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | H2S-2 |
| Motor | 350W Brushless Motor |
| Max Speed | 12.4 MPH (20 KM/H) |
| Battery | 29.4V 2000 mAh |
| Charging Time | Approx. 2 hours |
| Cruising Range | Up to 5 Miles (8 KM) |
| Max Load Capacity | 155 lbs (70 kg) |
| Deck Length | 27.6 Inches |
| Deck Width | 7.1 Inches |
| Wheel Size | 2.8 Inches (72 mm) |
| Wheel Material | Polyurethane (PU) |
| Griptape | Non-Slip Emery |
| Product Dimensions (LxWxH) | 27.6 x 7.1 x 5.5 inches |
| Product Weight | Approx. 12.6 lbs (5.7 kg) |

Figure 8.1: Product dimensions for the Vivi Electric Skateboard.
9. Warranty and Support
Vivi offers a 6-month warranty for the electric skateboard. For any questions, technical support, or warranty claims, please contact our customer service team. We provide 24-hour online customer service to assist you.
For further assistance, please visit the Vivi Store on Amazon.