1. Introduction
The 3M Green Corps Roloc Disc 36527 is engineered to simplify demanding collision repair tasks. This 80+ grit abrasive disc provides a fast cut and maintains its sharpness for various applications including paint removal, grinding, spot weld and hem flange grinding, and weld dressing. Its design ensures efficient material removal and a consistent finish.
Key Features
- Durable Construction: Long-lasting, fast-cutting discs suitable for heavy-duty applications.
- Small Diameter: 2-inch size allows access to hard-to-reach areas.
- Versatile Compatibility: Usable with a wide range of tools, including grinders and electric drills, when paired with the required Roloc adapter.
- Quick Change System: Easy twist-on, twist-off design facilitates rapid disc changes, enhancing workflow efficiency.
- Aluminum Oxide Abrasive: Provides aggressive cutting action and consistent performance.
2. Product Components
A single 3M Green Corps Roloc Disc, 80+ grit, 2 inches in diameter, featuring a coarse green abrasive surface.
What's in the Box
- Roloc Disc (Model 36527)
- 80+ Grit
A pack of 25 3M Green Corps Roloc Discs, 80+ grit, 2 inches, indicating the quantity included.
3. Setup and Installation
Attaching the Roloc Disc
The 3M Green Corps Roloc Disc utilizes a quick-change attachment system for easy installation and removal. Ensure your power tool (grinder or electric drill) is equipped with the appropriate Roloc adapter.
- Align the threaded button on the back of the Roloc disc with the corresponding receptacle on the Roloc adapter.
- Twist the disc clockwise until it is securely fastened. Do not overtighten.
- To remove, twist the disc counter-clockwise until it detaches from the adapter.
An illustrative diagram depicting the quick twist-on and twist-off mechanism of the Roloc attachment system for easy disc changes.
4. Operating Instructions
Recommended Applications
The 3M Green Corps Roloc Disc 36527 is designed for:
- Paint removal
- General grinding
- Spot weld grinding
- Hem flange grinding
- Weld dressing
An angled view of the 3M Green Corps Roloc Disc, highlighting its suitability for tasks such as paint removal, grinding, spot weld, and hem flange grinding.
General Usage Guidelines
Always wear appropriate personal protective equipment (PPE), including eye protection, gloves, and hearing protection, when operating power tools with abrasive discs. Ensure the workpiece is securely clamped to prevent movement during operation. Apply consistent, moderate pressure and move the disc evenly across the surface to achieve optimal results and prevent uneven wear.
A 3M Green Corps Roloc Disc attached to a power tool, demonstrating its small 2-inch diameter for accessing hard-to-reach areas during grinding.
Multiple 3M Green Corps Roloc Discs of various sizes alongside compatible grinding and drilling tools, illustrating their versatility.
Related Product Information
Video: 3M Grind Less Weld More Sample Kit Products. This video provides an overview of various 3M abrasive products, demonstrating their use in welding and grinding applications.
Video: Introducing 3M Cubitron 3 Performance Abrasives. This video showcases the advanced performance and features of 3M Cubitron 3 abrasive products, including grinding and cut-off wheels.
5. Maintenance and Storage
To maximize the lifespan and performance of your 3M Green Corps Roloc Discs:
- Inspection: Before each use, inspect the disc for any signs of damage, excessive wear, or cracks. Discard any damaged discs immediately.
- Cleaning: After use, gently brush off any accumulated debris or dust from the disc surface. Avoid using harsh chemicals or solvents.
- Storage: Store discs in a cool, dry place away from direct sunlight and moisture. Keep them in their original packaging or a protective container to prevent damage and contamination.
6. Troubleshooting
If you encounter issues while using your 3M Green Corps Roloc Disc, consider the following:
- Poor Cutting Performance: Ensure the disc is correctly seated on the Roloc adapter and that the power tool is operating at the recommended speed. If the disc appears dull or worn, replace it.
- Excessive Vibration: Check that the disc is securely attached and not damaged. Ensure the Roloc adapter and power tool are in good working condition.
- Disc Ejection: This indicates improper attachment. Re-attach the disc, ensuring it is twisted firmly onto the adapter. Never use a disc that has been ejected or appears loose.
7. Technical Specifications
| Specification | Detail |
|---|---|
| Brand | 3M |
| Model Number | 36527 |
| Grit Type | 80+ Grit |
| Grit Material | Aluminum Oxide |
| Product Dimensions | 2"L x 2"W |
| Item Weight | 4 ounces |
| Compatible Devices | Angle Grinder (with Roloc adapter) |
| Construction Type | Grinding |
A collection of 3M Green Corps Roloc discs and other abrasive products, showcasing the range of available grits and sizes (2-inch and 3-inch diameters).
8. Important Safety Information
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
9. Warranty and Support
For information regarding product warranty, technical support, or to report any issues, please contact 3M customer service or visit the official 3M website. Ensure you have your product model number (36527) available when seeking support.