Takki Portable Power Station S89 83Wh User Manual

1. Introduction

Thank you for choosing the Takki Portable Power Station S89 83Wh. This compact and versatile power solution is designed to provide reliable power for your electronic devices wherever you go. Whether you're camping, experiencing a power outage, or working remotely, the S89 offers multiple charging options and a built-in light to meet your needs. Please read this manual carefully before use to ensure safe and optimal operation.

2. Safety Information

• Do not disassemble, repair, or modify the unit. Incorrect reassembly may cause fire or electric shock.
• Do not expose the unit to fire or high temperatures (above 60°C/140°F).
• Do not use or store the unit in direct sunlight or in hot environments.
• Keep the unit away from water, moisture, and corrosive materials.
• Ensure proper ventilation during use and charging to prevent overheating.
• Keep out of reach of children.
• The portable power station can power devices up to 80W (Peak 120W). If more than that, it will automatically cut off the power for protection. It cannot supply power to devices exceeding its rated output.
• This product is only used for emergency power and cannot replace normal alternating current for long-term use.

3. Package Contents

Please check the package to ensure all items are included:

• Takki Portable Power Station S89 83Wh
• AC Adapter Charger
• Car Charger
• User Manual

4. Product Overview

Figure 4.1: Front and side view of the Takki Portable Power Station S89 83Wh, highlighting its compact design and handle.

Figure 4.2: Rear view of the power station, showing the AC outlet, USB-A ports, USB-C port, DC input, and control buttons.

Key Components:

• AC Outlet (110V/80W Peak 120W): For powering small appliances and electronics.
• USB-A Ports (2x 18W QC3.0): For fast charging smartphones, tablets, and other USB-powered devices.
• USB Type-C Port (PD 30W): For fast charging compatible laptops, phones, and other devices.
• DC Input: For recharging the power station via AC adapter, car charger, or solar panel.
• LED Light: Integrated light with 4 brightness levels and SOS mode for illumination.
• Capacity Indicator: LED lights indicating the remaining battery capacity.
• Power Buttons: Separate buttons for AC output, USB output, and LED light control.

5. Setup

Initial Charging:

Before first use, fully charge your Takki Portable Power Station. This ensures optimal battery performance and longevity.

1. Connect the provided AC adapter to the DC Input port on the power station.
2. Plug the AC adapter into a standard wall outlet.
3. The capacity indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.

Figure 5.1: The Takki Portable Power Station can be charged via wall outlet, car charger, or a compatible solar panel (sold separately).

6. Operating Instructions

Using the AC Outlet:

1. Press the AC power button to turn on the AC output. The indicator light will illuminate.
2. Plug your device's power cord into the AC outlet.
3. Ensure your device's power consumption does not exceed 80W (120W peak).
4. Press the AC power button again to turn off the AC output when not in use.

Using USB Ports:

1. Press the USB power button to activate the USB outputs. The indicator light will illuminate.
2. Connect your USB-powered devices to the USB-A or USB Type-C ports using appropriate cables.
3. Press the USB power button again to turn off the USB outputs when not in use.

Figure 6.1: The power station can simultaneously charge a laptop via AC and a phone via USB-C.

Figure 6.2: Multiple devices like laptops, phones, and small fans can be charged simultaneously.

Using the LED Light:

1. Press the LED light button once to turn on the light at its lowest brightness setting.
2. Press the button repeatedly to cycle through the 4 brightness levels.
3. To activate SOS mode, press and hold the LED light button for 3 seconds. The light will flash in an SOS pattern.
4. Press the LED light button again to turn off the light.

Figure 6.3: The integrated LED light provides ample illumination for camping or emergency situations.

7. Recharging Modes

The Takki Portable Power Station S89 83Wh offers flexible recharging options:

• AC Wall Outlet: Use the provided AC adapter to charge from any standard wall outlet. (DC15V/1A, 6-7 hours for full charge)
• Car Charger: Use the provided car charger to recharge the unit from your vehicle's 12V cigarette lighter port.
• Solar Panel: The unit can be recharged using a 12-22 volt solar panel (not included). Connect the solar panel to the DC Input port. (DC 10.7V~22V/1.1A Max)

Figure 7.1: The power station supports charging via Takki 30W or 60W solar panels (sold separately).

8. Maintenance

• Store the power station in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, charge the unit to 50-70% every 3-6 months to maintain battery health.
• Clean the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the heat dissipation holes are not blocked during use.

9. Troubleshooting

10. Specifications

11. Warranty and Support

The Takki Portable Power Station S89 83Wh comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims, technical support, or any questions regarding your product, please contact Takki customer service through the retailer where you purchased the product or visit the official Takki store online.

Official Takki Store: amazon.com/stores/Takki

User Manual (PDF): Download PDF