RUST-OLEUM 336247

Download PDF
Contents

RUST-OLEUM Remover Adhesive Spray RTU 8OZ 336247 User Manual

Model: 336247

Product Overview

The RUST-OLEUM Remover Adhesive Spray RTU 8OZ 336247 is a ready-to-use adhesive and tape remover designed for effective removal of various sticky residues. This product is formulated to be biodegradable, non-toxic, non-flammable, and water-based, making it a versatile solution for common household and industrial adhesive removal needs.

RUST-OLEUM Remover Adhesive Spray RTU 8OZ 336247 bottle

Image: RUST-OLEUM Remover Adhesive Spray RTU 8OZ 336247. The image shows a purple spray bottle with a white trigger sprayer. The label indicates "KRUD KUTTER ADHESIVE & TAPE REMOVER" and highlights "BIODEGRADABLE NON-TOXIC". It also states "8 FL OZ 236mL" and includes a warning about eye and skin irritation.

It is specifically designed to remove glue, grease, dirt, adhesive, and mastic from compatible surfaces, including paper. Always refer to the safety warnings on the product label before use.

Safety Information

WARNING: EYE AND SKIN IRRITANT. Read all cautions on the back panel of the product before use. Keep out of reach of children and pets. Use in a well-ventilated area. Avoid contact with eyes and prolonged contact with skin. In case of contact, rinse thoroughly with water. If irritation persists, seek medical attention.

Always test in an inconspicuous area first to ensure compatibility with the surface material.

Setup

  1. Prepare the Area: Ensure the work area is well-ventilated. Protect surrounding areas from overspray with drop cloths or newspaper.
  2. Surface Preparation: For best results, ensure the surface to be treated is dry and free of loose debris.
  3. Shake Bottle: Shake the RUST-OLEUM Remover Adhesive Spray bottle thoroughly before each use to ensure proper mixing of the contents.
  4. Unlock Nozzle: Twist the nozzle to the "SPRAY" or "ON" position.

Operating Instructions

Follow these steps for effective removal of adhesives and other residues:

  1. Test First: Always test the product on a small, inconspicuous area of the surface to be cleaned to ensure compatibility and prevent damage or discoloration.
  2. Apply Product: Spray the RUST-OLEUM Remover Adhesive directly onto the adhesive, glue, grease, dirt, or mastic you wish to remove. Ensure the area is thoroughly saturated.
  3. Allow to Penetrate: Allow the product to penetrate the residue for several minutes. The exact time may vary depending on the type and age of the adhesive. For tougher residues, allow more time.
  4. Scrape or Wipe: Gently scrape away the softened residue with a plastic scraper or a non-abrasive cloth. For lighter residues, a simple wipe may suffice.
  5. Clean Surface: Wipe the treated area clean with a damp cloth. For best results, follow with a clean, dry cloth.
  6. Repeat if Necessary: For stubborn or thick residues, a second application may be required.

Maintenance

  • Nozzle Cleaning: After each use, if the nozzle appears clogged, remove it and rinse thoroughly with warm water. Reattach securely.
  • Storage: Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the nozzle is twisted to the "OFF" or "LOCKED" position to prevent accidental spraying.
  • Container Integrity: Keep the container tightly closed when not in use to prevent evaporation and maintain product effectiveness.

Troubleshooting

ProblemPossible CauseSolution
Product not spraying.Nozzle is clogged or in "OFF" position.Ensure nozzle is twisted to "SPRAY" or "ON". Remove and rinse nozzle with warm water if clogged.
Adhesive not removing effectively.Insufficient penetration time or very stubborn residue.Allow more time for the product to penetrate. Apply a second application and allow it to sit longer before scraping/wiping. Ensure surface was clean before application.
Surface discoloration or damage.Product incompatibility with surface material.Always perform a test in an inconspicuous area before full application. This product is compatible with paper, but other materials should be tested.

Specifications

  • Product Name: RUST-OLEUM Remover Adhesive Spray RTU 8OZ
  • Model Number: 336247
  • Brand: RUST-OLEUM
  • Item Form: Spray
  • Volume: 8 FL OZ (236 mL)
  • Product Dimensions: 2 x 4 x 7 inches
  • Item Weight: 9.6 ounces
  • Specific Uses: Glue, Grease, Dirt, Adhesive, Mastic removal
  • Compatible Material: Paper (test other materials)
  • Special Features: Biodegradable, Water-based, Non-flammable, Non Toxic
  • Manufacturer: RUST-OLEUM
  • First Available Date: July 23, 2021

Warranty and Support

For detailed warranty information and customer support, please refer to the official RUST-OLEUM website or contact their customer service directly. Product support and warranty terms may vary by region and purchase location.

You can visit the official RUST-OLEUM store page for more information: RUST-OLEUM Store

© 2024 RUST-OLEUM. All rights reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.