ZEBRONICS ZEB-GC2000

Zebronics ZEB-GC2000 Premium Gaming Chair User Manual

Model: ZEB-GC2000 | Brand: ZEBRONICS

Introduction

Thank you for choosing the Zebronics ZEB-GC2000 Premium Gaming Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new gaming chair. Please read this manual thoroughly before assembly and retain it for future reference.

The ZEB-GC2000 is designed with healthy ergonomics to provide full support for your back and neck, featuring a 90-180 degree reclinable backrest, 3D armrests, and durable PVC leather material.

Safety Precautions

To ensure safe operation and prolong the life of your chair, please observe the following:

Do not stand on the chair.
Do not use the chair as a step stool.
Do not sit on the armrests.
Ensure all bolts and screws are tightened before use.
Do not expose the chair to direct sunlight or extreme temperatures.
Keep away from sharp objects to prevent damage to the PVC leather.
Maximum weight recommendation: 140 Kilograms.

Package Contents

Verify that all components are present before beginning assembly:

Chair - 1 unit (main components)
Neck Cushion - 1 unit
Lumbar Cushion - 1 unit
Assembly Hardware Kit (screws, bolts, Allen key)
Instruction Manual (this document)

If any parts are missing or damaged, please contact Zebronics customer support.

Setup and Assembly

Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.

Step 1: Attach Casters to Base

Insert the 60mm caster wheels into the holes at the end of each leg of the chair's star base. Push firmly until they click into place.

Chair base with caster wheels — Image: The chair's five-star base with 60mm caster wheels attached, ready for the gas lift.

Step 2: Insert Gas Lift

Place the Class 4 gas lift cylinder into the center hole of the assembled star base. Ensure it is seated securely.

Gas lift inserted into chair base — Image: Close-up of the gas lift mechanism, showing its robust design and connection point to the chair base.

Step 3: Attach Mechanism to Seat

Align the butterfly mechanism with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen key. Ensure the lever is facing the front of the seat.

Step 4: Connect Seat to Gas Lift

Carefully place the assembled seat (with mechanism) onto the gas lift cylinder. Press down firmly to ensure a secure connection.

Step 5: Attach Backrest to Seat

Align the backrest with the metal brackets on the sides of the seat. Secure it using the provided screws. Do not overtighten initially; tighten fully once both sides are aligned.

Step 6: Install Armrests

Attach the 3D armrests to the designated points on the seat and backrest using the provided hardware. Ensure they are securely fastened.

3D Armrest adjustment demonstration — Image: Visual demonstration of the 3D armrest's multi-directional adjustment capabilities, showing movement forward/backward and rotation.

Step 7: Attach Cushions

Attach the detachable neck cushion and lumbar cushion using their integrated straps. Adjust their positions for optimal comfort and support.

Neck and Lumbar Cushions on chair — Image: The Zebronics gaming chair with its detachable neck/head cushion and lumbar cushion clearly visible and attached.

Operating Instructions

Height Adjustment

To adjust the chair's height, pull the lever located on the right side of the seat upwards. While pulling, apply weight to lower the chair or lift your weight to raise it. Release the lever to lock the height.

Backrest Recline

The backrest can recline from 90 to 180 degrees. Pull the recline lever located on the right side of the chair (below the armrest) to adjust the angle. Release the lever to lock the backrest in your desired position.

Chair backrest reclining from 90 to 180 degrees — Image: A sequence showing the chair's backrest reclining from an upright 90-degree position to a fully flat 180-degree position.

Armrest Adjustment

The 3D armrests can be adjusted in multiple directions: up/down, forward/backward, and rotated inwards/outwards. Use the buttons or levers on the armrests to unlock and adjust, then release to lock.

Swivel Function

The chair features a 360-degree swivel function, allowing for easy rotation without moving the base.

Maintenance

Regular maintenance will help keep your Zebronics ZEB-GC2000 chair in excellent condition.

Cleaning: Wipe clean with a soft, damp cloth. For stubborn stains on PVC leather, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary to prevent wobbling or instability.
Casters: Keep caster wheels free of hair and debris to ensure smooth rolling.
Avoid Overloading: Do not exceed the maximum weight capacity of 140 Kilograms.
Environment: Store the chair in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.

Close-up of PVC/Vegan Leather texture — Image: A close-up texture shot of the PVC/Vegan Leather material used in the chair, highlighting its durable and easy-to-clean surface.

Troubleshooting

Problem	Possible Cause	Solution
Chair wobbles or feels unstable.	Loose screws or bolts.	Check and tighten all assembly screws and bolts, especially those connecting the backrest and mechanism.
Chair does not adjust height smoothly.	Gas lift issue or obstruction.	Ensure the height adjustment lever is fully engaged. Check for any obstructions around the gas lift cylinder. If the issue persists, the gas lift may need replacement.
Backrest does not recline or lock.	Recline mechanism issue.	Ensure the recline lever is fully pulled to unlock and released to lock. Check for any foreign objects obstructing the mechanism.
Caster wheels do not roll smoothly.	Debris caught in wheels.	Turn the chair over and remove any hair, dust, or debris from the caster wheels.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Zebronics customer support.

Specifications

Brand: ZEBRONICS
Model Name: ZEB-GC2000
Colour: Black-red
Material: Polyvinyl Chloride Leather (PVC Leather)
Product Dimensions (D x W x H): 32D x 65W x 85H Centimeters
Size: Large
Back Style: Wing Back
Special Features: Adjustable Backrest (90-180 degrees), Adjustable Height, Adjustable Lumbar, Head Support, Cushion Availability, 360-degree Swivel, 3D Armrest
Product Care Instructions: Wipe Clean
Maximum Weight Recommendation: 140 Kilograms
Included Components: Chair - 1 unit
Item Weight: 21 kg 400 g
Gas Lift: Class 4
Caster Wheels: 60mm

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Zebronics website. Keep your purchase receipt as proof of purchase.

For technical support, service, or spare parts, please contact Zebronics customer service:

Zebronics Official Website: www.zebronics.com
Customer Service Contact: Refer to the website or product packaging for the latest contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.