Akai DVB-T2 H.265 HEVC HD 10-bit Scart Decoder User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Akai DVB-T2 H.265 HEVC HD 10-bit Scart Decoder. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your viewing experience.

The Akai Scart Decoder is designed to receive DVB-T2 digital terrestrial television broadcasts, supporting H.265 HEVC 10-bit video decoding for high-definition content. It also features multimedia playback capabilities via USB.

2. Package Contents

• Akai DVB-T2 H.265 HEVC HD 10-bit Scart Decoder
• Remote Control (requires 2x AAA 1.5V batteries, not included)
• IR Extender
• User Manual (this document)

Figure 1: Akai DVB-T2 Scart Decoder, remote control (A), and IR extender (B).

3. Device Overview

3.1 Front/Side Panel Connections

Figure 2: Side view of the decoder with HDMI-OUT, COAX, LOOP OUT, and RF IN ports.

• RF IN: Connect to your terrestrial antenna.
• LOOP OUT: Connect to another DVB-T2 device or TV to pass through the antenna signal.
• COAX: Digital audio output.
• HDMI-OUT: Connect to your TV or display for high-definition video and audio.

3.2 Rear/Other Side Panel Connections

Figure 3: Side view of the decoder with DC-12V, USB, and IR ports.

• DC-12V: Power input for the device.
• USB 5V: Connect USB storage devices for multimedia playback.
• IR: Connect the external IR extender for remote control functionality if the decoder is out of direct line of sight.
• Scart (Péritel): Integrated Scart connector for direct connection to older TVs.

4. Setup

4.1 Connecting the Decoder to Your TV

1. Antenna Connection: Connect your terrestrial antenna cable to the RF IN port on the decoder.
2. TV Connection (HDMI): For optimal picture quality, connect an HDMI cable from the HDMI-OUT port on the decoder to an available HDMI input on your television.
3. TV Connection (Scart): Alternatively, if your TV does not have an HDMI input, connect the integrated Scart connector directly to the Scart input on your television.
4. Power Connection: Connect the 12V power adapter to the DC-12V port on the decoder, then plug the adapter into a power outlet.
5. Remote Control Batteries: Open the battery compartment of the remote control and insert two AAA 1.5V batteries, ensuring correct polarity.
6. IR Extender (Optional): If the decoder is hidden or out of direct line of sight, connect the IR extender to the IR port and position the extender where it can receive signals from the remote control.

4.2 Initial Setup and Channel Scan

1. Turn on your television and select the correct input source (HDMI or Scart) corresponding to where the decoder is connected.
2. The decoder will power on. The first-time setup wizard should appear on your screen.
3. Follow the on-screen prompts to select your preferred language (multilingual menu supported).
4. Initiate an Automatic Channel Search. The decoder will scan for available DVB-T2 channels. This process may take several minutes.
5. Once the scan is complete, the decoder will save the channels and display the first available channel.
6. You can also perform a Manual Channel Search through the menu if needed.

5. Operating Instructions

5.1 Basic Functions

• Power On/Off: Press the POWER button on the remote control.
• Channel Selection: Use the CH+/CH- buttons or enter the channel number directly using the numeric keypad.
• Volume Control: Use the VOL+/VOL- buttons.
• Mute: Press the MUTE button to temporarily silence the audio.
• Menu: Press the MENU button to access the main menu for settings and features.
• Exit: Press the EXIT button to leave the current menu or function.

5.2 Advanced Features

• Multimedia Playback (USB):
  1. Insert a USB storage device into the USB 5V port.
  2. Access the multimedia player through the main menu.
  3. The decoder supports playback of video files (TS, MPG, MP4, AVI, MKV), image files (JPG), and audio files (MP3).
• Parental Control: Access the Parental Control settings in the main menu to set age restrictions for channels or programs. A PIN code is typically required.
• Teletext: Press the TEXT button on the remote control to access teletext services on supported channels.
• Dolby Digital 7.1 (D+): The decoder supports Dolby Digital 7.1 audio output for an immersive sound experience when connected to a compatible audio system via HDMI or COAX.
• Remote Control Auto-Learning: The remote control features an auto-learning function, allowing it to learn commands from your TV remote for basic TV functions (e.g., TV Power, Volume). Refer to the remote control's specific instructions for this feature.

6. Maintenance

To ensure the longevity and optimal performance of your Akai Scart Decoder, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
• Ventilation: Ensure the device is placed in a well-ventilated area. Do not block any ventilation openings.
• Power Off: Disconnect the power adapter from the wall outlet if the device will not be used for an extended period.
• Avoid Moisture: Keep the device away from water, high humidity, and extreme temperatures.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Akai Professional products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Akai Professional website. Keep your proof of purchase for any warranty claims.

For technical support or further assistance, please contact Akai Professional customer service. Contact details can typically be found on the brand's official website or in the product packaging.

Note: Information regarding spare parts availability and software updates is not available at this time, as per product specifications.