Infinity Instruments 15085BK-CBR-4492

Infinity Instruments Forecaster 16-Inch Indoor/Outdoor Wall Clock, Thermometer, and Hygrometer Combo Instruction Manual

1. Overview

The Infinity Instruments Forecaster is a 16-inch indoor/outdoor wall clock that also features integrated thermometer and hygrometer gauges. Designed for durability, this combo unit provides accurate time, temperature, and humidity readings, making it suitable for various environments including patios, gardens, garages, and indoor spaces. Its robust construction ensures resistance to outdoor elements.

Video: An overview of Infinity Instruments, showcasing various clock designs and their application in different settings. This video provides context about the brand's product range.

2. Setup

2.1 Battery Installation

The Forecaster clock requires one (1) AA battery (not included). To install the battery:

  1. Locate the battery compartment on the back of the clock.
  2. Remove the protective cover by unscrewing the small screws.
  3. Insert one fresh AA battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the protective cover and secure it with the screws. This cover helps protect the clock movement from the elements.
Back of the Infinity Instruments Forecaster clock showing the battery compartment with a protective cover.

Image: The rear view of the clock, highlighting the sealed battery compartment designed to protect the clock mechanism from environmental factors.

2.2 Time Setting

After installing the battery, set the time by rotating the small wheel on the clock mechanism located within the battery compartment. Do not move the clock hands directly, as this may damage the movement.

2.3 Mounting

The clock features a keyhole hanging mechanism for easy installation. Choose a suitable location, considering visibility and protection from extreme direct weather conditions for optimal longevity. Securely hang the clock using an appropriate wall anchor or hook for its weight (approximately 1.98 pounds).

Infinity Instruments Forecaster clock mounted on an outdoor wall above a patio table and chairs.

Image: The Forecaster clock displayed on an outdoor wall, demonstrating its aesthetic integration into a patio setting.

2.4 Initial Calibration of Weather Instruments

The thermometer and hygrometer are typically pre-calibrated. However, if you suspect inaccurate readings, they can be adjusted. On the back of the clock, near each gauge, there is a small adjustment screw. Use a small flathead screwdriver to gently turn these screws until the readings match a known accurate source (e.g., a trusted weather station or another calibrated instrument).

Diagram showing the humidity and temperature gauges, and close-ups of the calibration screw and covered battery compartment on the back of the clock.

Image: A detailed diagram illustrating the humidity and temperature gauges, along with instructions on how to calibrate them using a flathead screwdriver and showing the covered battery compartment.

3. Operation

3.1 Reading the Time

The clock face displays time using traditional hour, minute, and second hands. The large, clear numerals ensure easy readability from a distance.

3.2 Reading the Temperature

The thermometer gauge displays temperature in degrees Fahrenheit. The needle indicates the current ambient temperature. Ensure the clock is not in direct sunlight or near heat sources for accurate readings.

Close-up of the temperature gauge on the Forecaster clock, showing readings from -40°F to 140°F.

Image: A close-up view of the temperature gauge, clearly showing the temperature scale and indicator needle.

3.3 Reading the Humidity

The hygrometer gauge displays relative humidity as a percentage. The needle indicates the current ambient humidity level. For accurate humidity readings, avoid placing the clock in areas with high localized moisture or extreme dryness.

Close-up of the humidity gauge on the Forecaster clock, showing readings from 0% to 100% humidity.

Image: A close-up view of the humidity gauge, clearly showing the humidity percentage scale and indicator needle.

4. Maintenance

4.1 Cleaning

To clean the clock, wipe the surface with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using abrasive cleaners or solvents, as these can damage the finish or the clear face.

4.2 Battery Replacement

Replace the AA battery annually or when the clock begins to lose time. Prompt battery replacement ensures continuous and accurate operation.

4.3 Weather Protection

The Forecaster is designed to be weatherproof with a durable frame and a sealed pocket for the clock movement. While it can withstand outdoor elements, placing it under a covered area (e.g., patio, porch) can further extend its lifespan and maintain optimal performance.

5. Troubleshooting

IssuePossible CauseSolution
Clock not working or losing timeDead or weak battery; improperly installed battery.Replace with a fresh AA battery, ensuring correct polarity.
Inaccurate temperature or humidity readingsGauges require calibration; direct sunlight or heat source affecting thermometer; localized moisture affecting hygrometer.Calibrate the gauges using a small flathead screwdriver on the back of the unit. Relocate the clock if exposed to extreme conditions.
Clock hands getting stuckBent clock hand or gauge needle obstructing movement.Carefully inspect the hands and gauge needles. If accessible and safe, gently adjust any bent components to ensure free movement. If not, contact customer support.

6. Product Specifications

  • Brand: Infinity Instruments
  • Model Number: 15085BK-CBR-4492
  • Display Type: Analog
  • Product Dimensions: 16 inches (Width) x 16 inches (Height) x 2.25 inches (Depth)
  • Item Weight: 1.98 Pounds
  • Power Source: Battery Powered (1 AA battery required, not included)
  • Material: Glass, Metal, Plastic
  • Frame Material: Plastic
  • Indoor/Outdoor Usage: Indoor, Outdoor
  • Special Features: Clock, Thermometer, Hygrometer
  • Mounting Type: Wall Mount (Keyhole mechanism)
  • UPC: 731742150486

7. Warranty Information

The Infinity Instruments Forecaster is covered by a 1-year, limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, refer to the documentation included with your product or contact Infinity Instruments customer support.

8. Customer Support

For further assistance, technical support, or to inquire about replacement parts, please contact Infinity Instruments customer support. Contact information can typically be found on the product packaging or the official Infinity Instruments website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.