1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your HFeng Outdoor IP68 Waterproof RFID Fingerprint Access Control Keypad. This device offers secure access management through fingerprint, RFID card, and password authentication, designed for outdoor use with its IP68 waterproof rating.
2. Product Features
- IP68 Waterproof Rating: Suitable for outdoor installation, resistant to dust and water immersion.
- Multiple Access Methods: Supports fingerprint, 13.56MHz MF 1K RFID card, and password for unlocking.
- High User Capacity: Stores up to 120 fingerprints, 120 cards, and 1 public password.
- 360-Degree Fingerprint Recognition: Fast and accurate identification from various angles.
- Integrated Touch Panel: Features a sleek touch screen keypad with blue backlight for visibility in low light.
- Standalone Programming: All programming can be performed directly on the keypad without requiring a computer or software.
- Management Card Support: Includes dedicated management cards for easy user addition and deletion.
- WG26/34 Wiegand Interface: Allows connection to an external card reader for expanded functionality.
- Doorbell Functionality: Equipped with a doorbell button for connection to an external wired doorbell.
3. Specifications
| Feature | Specification |
|---|---|
| Material | High quality plastic |
| Working Voltage | 12V DC |
| Waterproof Level | IP68 |
| Working Frequency | 13.56MHz |
| User Capacity | 120 Fingerprints, 120 Cards, 1 Public Password |
| Card Reading Type | MF 1K Card |
| Card Reading Distance | 0-5CM |
| Identification Method | Fingerprint, Card, Password |
| Backlight | Blue Backlight |
| Wiegand Signal | WG26/34 Input/Output |
| Door Opening Time | 0-255 seconds |
| Working Temperature | -20°C ~ 70°C |
| Product Dimensions | 140 x 70 x 16 mm (5.51 x 2.76 x 0.63 inches) |
4. Package Contents
- 1 x RFID Keypad
- 10 x RFID Blue Key Fobs
- 2 x Management Cards
5. Setup and Installation
The HFeng Access Control Keypad is designed for outdoor installation due to its IP68 waterproof rating. Ensure proper wiring and mounting for optimal performance.
5.1 Mounting
Mount the keypad securely to a flat surface. Refer to the product dimensions for precise placement and drilling.
Image 1: Product Dimensions. This image illustrates the physical dimensions of the keypad and the mounting hole layout on the backplate.
5.2 Wiring
Connect the keypad to a 12V DC power source. Utilize the WG26/34 Wiegand interface for connecting to an external card reader if desired. The doorbell button can be wired to a compatible external doorbell unit.
Image 2: IP68 Waterproof Design and Internal Wiring. This image highlights the keypad's water resistance and provides a view of the internal wiring connections for installation.
6. Operating Instructions
The keypad supports three primary methods for access: fingerprint, RFID card, and password. Programming is done directly on the device.
6.1 Access Methods
Image 3: Access Methods and Management. This image illustrates unlocking via fingerprint, RFID card, and password, along with instructions for adding and deleting user cards.
- Fingerprint Access: Place a registered finger on the fingerprint collector.
- RFID Card Access: Present a registered 13.56MHz MF 1K RFID card to the card reader area.
- Password Access: Enter the registered password on the touch keypad.
6.2 Programming Users
Use the provided management cards to simplify adding or deleting users. All programming steps are performed directly on the keypad.
- Add Card: Enter the 3-digit user number, then swipe the add card once or press the fingerprint three times. The buzzer will sound, and the light will flash.
- Delete Card: Enter the 3-digit user number, then swipe the delete card.
6.3 Backlight Function
The keypad features a blue backlight, ensuring digits are clearly visible even in dark environments.
Image 4: Backlight Function. This image demonstrates the keypad's blue backlight, which enhances visibility in dark conditions.
6.4 Keypad Layout
Image 5: Keypad Feature Overview. This image labels the key components of the keypad, including the touch key-press area, doorbell button, and fingerprint collector.
7. Maintenance
The IP68 rating ensures the keypad is highly resistant to environmental elements. For general maintenance, wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the touch panel.
8. Troubleshooting
- Keypad Unresponsive: Check the 12V DC power supply connection. Ensure wiring is secure.
- Fingerprint Not Recognized: Ensure your finger is clean and dry. Try repositioning your finger on the sensor. Re-enroll your fingerprint if issues persist.
- RFID Card Not Working: Ensure the card is a 13.56MHz MF 1K type. Verify the card is properly registered.
- Door Not Unlocking: Check the door opening time setting (0-255 seconds). Verify the lock mechanism is correctly connected and receiving the signal.
- Backlight Not On: Ensure the keypad is powered correctly. The backlight should activate with keypad interaction.
9. Warranty and Support
For warranty information and technical support, please refer to the contact details provided by your retailer or the manufacturer, HFeng. Keep your purchase receipt for warranty claims.
