Introduction
The Kokido Telsa 80 Swimming Pool Vacuum is designed for efficient and convenient pool cleaning. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your vacuum. Please read this manual thoroughly before first use.
Safety Information
Always follow basic safety precautions when using electrical appliances, especially near water. This vacuum is designed for underwater use. Ensure the unit is fully charged and properly assembled before submerging. Do not operate if the unit appears damaged. Keep out of reach of children.
- Do not attempt to open or repair the battery compartment.
- Use only the charger supplied by the manufacturer.
- Ensure the waterproof magnetic switch is securely engaged during operation.
- Always remove the vacuum from the water and turn it off before cleaning or maintenance.
Product Overview and Components
The Telsa 80 vacuum consists of several key components designed for optimal pool cleaning.
Figure 1: The Kokido Telsa 80 Swimming Pool Vacuum, showing the main unit, handle, and attachment point for a telescopic pole.
Figure 2: Exploded view of the Telsa 80, illustrating its main components including the motor unit, filter, and base with wheels.
- Main Unit: Houses the motor and battery.
- Handle: Ergonomically designed for handheld use or attachment to a telescopic pole.
- Waterproof Magnetic Switch: For safe power control.
- Weighted Body: Ensures the vacuum stays submerged and maintains contact with the pool surface.
- Pivoting Wheels: Allow for easy maneuverability across various pool surfaces.
- Soft Bumpers: Protect pool walls from scratches.
- Removable Filter: Collects debris and is easy to clean.
- Filtered Water Release Valve: Facilitates easy removal of the vacuum from the water.
Setup
- Charge the Battery: Before first use, fully charge the vacuum's rechargeable lithium-ion battery using the provided charger. Refer to the charger's instructions for charging indicators.
- Attach Telescopic Pole (Optional): Connect the vacuum to a standard telescopic pole (not included) for extended reach, or use the integrated handle for handheld operation.
Operating Instructions
- Submerge the Vacuum: Carefully lower the vacuum into the pool until it is fully submerged.
- Activate the Vacuum: Turn on the vacuum using the waterproof magnetic switch. The unit will begin to operate.
- Clean the Pool: Maneuver the vacuum around the pool, allowing the pivoting wheels to guide it smoothly across the bottom and sides. The weighted body will help maintain surface contact for effective cleaning. The soft bumpers protect your pool walls.
- Monitor Debris Collection: Periodically check the removable filter for debris accumulation.
- Remove from Water: When cleaning is complete or the filter needs emptying, lift the vacuum out of the pool. The filtered water release valve will allow water to drain, making removal easier.
Figure 3: The Telsa 80 vacuum being lifted from the pool, demonstrating the water release feature.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Kokido Telsa 80 vacuum.
- Clean the Filter: After each use, or as needed, remove the filter and clean it thoroughly. Rinse with fresh water to remove all debris. Ensure the filter is dry before reinserting.
- Recharge Battery: Recharge the lithium-ion battery as needed. Store the vacuum with a charged battery to prolong its life.
- Storage: Store the vacuum in a cool, dry place away from direct sunlight and extreme temperatures.
- General Cleaning: Wipe down the exterior of the vacuum with a damp cloth as needed. Do not use harsh chemicals.
Figure 4: A user demonstrating the removal and cleaning of the vacuum's filter.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. | Battery is not charged. | Charge the battery fully. |
| Vacuum loses suction or cleans poorly. | Filter is clogged with debris. | Remove and clean the filter thoroughly. |
| Lid does not stay latched, releasing debris. | Defective latch mechanism. | Ensure the lid is properly aligned and clicked into place. If the issue persists, contact customer support for assistance. |
| Vacuum is difficult to maneuver. | Wheels are obstructed or damaged. | Check wheels for debris or damage and clean/clear as necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Telsa 80 |
| Model Number | KEV80CBX |
| Brand | Kokido |
| Power Source | Battery Powered |
| Battery Type | Lithium-Ion |
| Lithium Battery Voltage | 3.6 Volts |
| Item Weight | 11.48 pounds (5.22 Kilograms) |
| Product Dimensions | 12 x 12 x 12 inches |
| Control Method | Touch |
| Special Feature | Waterproof |
| Material | Nylon |
| Color | Gray |
| UPC | 844268020079 |
Warranty Information
The Kokido Telsa 80 Swimming Pool Vacuum comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Kokido website. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Kokido customer service. You can also visit the official Kokido store for more information: