1. Setup
1.1 Battery Installation
The Lovehoney Triple Tickler requires 2 AA batteries (not included). To install the batteries:
- Twist the base of the vibrator counter-clockwise to open the battery compartment.
- Insert two AA batteries, ensuring correct polarity (+/-).
- Twist the base clockwise until securely closed. Ensure it is tightly sealed for waterproof functionality.
1.2 Initial Cleaning
Before first use, clean the vibrator thoroughly with warm water and a toy cleaner, or mild soap. Rinse well and allow to air dry.
1.3 Lubrication
For optimal comfort and sensation, apply a generous amount of water-based lubricant to the vibrator before use. Avoid silicone-based lubricants as they may degrade the material of the toy.

Image: The Lovehoney Triple Tickler Vibrating Dildo, highlighting its clear, realistic design and fluted ticklers at the base.
2. Operation
2.1 Powering On and Adjusting Vibrations
The Triple Tickler features multispeed vibrations controlled by a twist base:
- To turn on the vibrator, twist the base clockwise.
- Continue twisting the base clockwise to cycle through various vibration speeds and patterns.
- To turn off the vibrator, twist the base counter-clockwise until it clicks off.

Image: Detail of the twist base, which controls the multispeed vibrations of the device.
2.2 Stimulation
This vibrator is designed for both internal and external stimulation:
- Internal Stimulation: The curved head is designed to target the G-spot for intense sensations.
- External Stimulation: The fluted ticklers at the base provide powerful vibrations for clitoral stimulation.

Image: The curved head of the vibrator, designed for firm and precise internal sensations.

Image: The fluted ticklers located at the base, providing intense external stimulation.
3. Maintenance
3.1 Cleaning
To ensure hygiene and prolong the life of your vibrator:
- Always clean the vibrator immediately after each use.
- Wash with warm water and a dedicated toy cleaner or mild, antibacterial soap.
- Rinse thoroughly to remove all soap residue.
- Pat dry with a lint-free cloth or allow to air dry completely before storing.
3.2 Storage
Store your vibrator in a clean, dry place away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent potential reactions.

Image: The vibrator shown submerged in water, illustrating its waterproof design for easy cleaning and use in wet environments.
4. Troubleshooting
4.1 Device Not Turning On
- Check Batteries: Ensure that two fresh AA batteries are correctly installed with the proper polarity.
- Secure Base: Make sure the twist base is fully tightened and engaged. A loose base may prevent the device from powering on.
- Battery Compartment: Inspect the battery compartment for any moisture or corrosion. Clean if necessary.
4.2 Weak Vibrations
- Replace Batteries: Weak vibrations often indicate low battery power. Replace with new AA batteries.
5. Specifications
| Model Name | Triple Tickler |
| Product Dimensions | 12.2 x 5.91 x 2.36 inches |
| Weight | 10.55 ounces |
| Material | Plastic |
| Power Source | 2 AA batteries (not included) |
| Waterproof | Submersible |
6. Warranty & Support
For warranty information, product support, or any inquiries regarding your Lovehoney Triple Tickler Vibrating Dildo, please contact Lovehoney customer service directly through their official website or the retailer where the product was purchased.
Video: An official Lovehoney video demonstrating the features and use of the Triple Tickler Vibrating Dildo.