Introduction
Thank you for choosing the Vipack Billy 3-Piece Furniture Set. This set includes a 90 x 200 cm bed, a nightstand, and a chest of drawers, designed to provide functional and stylish furnishing for your bedroom. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture.
Please read this manual carefully before beginning assembly or using the product. Keep it for future reference.
Safety Information
- Adult Assembly Required: This product is delivered disassembled and requires adult assembly.
- Keep Children Away: Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Use Correct Tools: Ensure you have the necessary tools for assembly as specified in the included illustrated instructions.
- Secure Furniture: For safety, especially with the chest of drawers, consider anchoring the furniture to the wall to prevent tipping. Wall anchoring hardware may be included or sold separately.
- Weight Limits: Do not exceed the recommended weight limits for the bed or drawers.
- Regular Checks: Periodically check all connections and fasteners to ensure they remain tight. Retighten as necessary.
- Proper Placement: Place furniture on a level surface. Avoid placing near heat sources or in direct sunlight to prevent damage.
Package Contents
Your Vipack Billy 3-Piece Furniture Set package should contain the following main components:
- Components for 1 x Bed (90 x 200 cm)
- Components for 1 x Nightstand
- Components for 1 x Chest of Drawers
- Hardware pack (screws, dowels, connectors, etc.)
- Illustrated Assembly Instructions
Before starting assembly, unpack all components and verify against the parts list in your specific assembly instructions. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
Setup (Assembly)
The Vipack Billy furniture set is delivered disassembled and includes easy-to-understand illustrated assembly instructions. Please refer to these specific instructions for detailed, step-by-step guidance for each furniture piece.

Image: The Vipack Billy 3-Piece Furniture Set, featuring a white bed, a matching nightstand, and a chest of drawers, assembled in a room.
General Assembly Tips:
- Clear Workspace: Ensure you have a large, clear, and clean area for assembly.
- Protect Surfaces: Lay down a blanket or cardboard to protect both your floor and the furniture components from scratches.
- Organize Parts: Sort all hardware and components according to the assembly instructions.
- Do Not Overtighten: Tighten screws firmly, but do not overtighten, as this can strip threads or damage the material.
- Two-Person Assembly: Some steps, especially for the bed, may require two people for easier and safer assembly.
Operating (Usage)
Bed (90 x 200 cm):
- Designed for a standard 90 x 200 cm mattress (not included).
- Ensure the mattress fits snugly within the bed frame.
- Avoid jumping on the bed to prevent damage to the frame and slats.
Nightstand:
- Use for bedside essentials such as lamps, books, and personal items.
- Do not place excessively heavy items on top or inside the drawers.
- Ensure drawers slide smoothly and are not overloaded.
Chest of Drawers:
- Ideal for storing clothing and other personal belongings.
- Distribute weight evenly across drawers to maintain stability.
- Always close drawers completely after use.
- Tip-Over Hazard: For safety, always use the provided wall anchoring hardware to secure the chest of drawers to a wall. Never allow children to climb on drawers.
Maintenance
Cleaning:
- Wipe surfaces with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the satin white finish.
- Immediately wipe up spills to prevent staining or water damage.
General Care:
- Periodically check and tighten all screws and fasteners to ensure the furniture remains stable and secure.
- Avoid dragging furniture when moving it; always lift to prevent damage to legs and frame.
- Protect surfaces from hot items, sharp objects, and excessive moisture.
Troubleshooting
Loose Connections:
- Issue: Furniture feels wobbly or unstable.
- Solution: Check all screws and bolts. Tighten any that are loose. Do not overtighten.
Drawers Not Sliding Smoothly:
- Issue: Drawers stick or are difficult to open/close.
- Solution: Ensure drawers are not overloaded. Check that the drawer runners are clean and free of obstructions. Verify that the furniture is on a level surface. Re-check assembly of drawer runners if issue persists.
Surface Scratches/Dents:
- Issue: Minor cosmetic damage to the finish.
- Solution: For minor scratches, a furniture repair pen or touch-up paint matching the satin white finish may be used. Consult a professional for significant damage.
Specifications
| Product Name | Vipack Billy 3-Piece Furniture Set |
| Model | Billy Ensemble de 3 pièces |
| Color | Satin White |
| Bed Dimensions | For mattress size 90 x 200 cm (external dimensions will vary slightly) |
| Nightstand Dimensions | (Specific dimensions not provided, refer to product packaging or retailer) |
| Chest of Drawers Dimensions | (Specific dimensions not provided, refer to product packaging or retailer) |
| Total Item Weight | Approximately 83 Kilograms (for the entire set) |
| Material | Wood-based materials with satin white finish (Made in Belgium) |
| Assembly Required | Yes (DIY assembly with included instructions) |
Note: All dimensions are approximate and subject to minor variations.
Warranty and Support
Vipack products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the documentation provided with your purchase or contact your retailer.
If you encounter any issues, require replacement parts, or have questions not covered in this manual, please contact the retailer where you purchased the product or Vipack customer support directly. Have your purchase receipt and product model information (Billy Ensemble de 3 pièces) ready when contacting support.





