1. Introduction
This document serves as a comprehensive guide for the Easytry123 replacement remote control, designed for various JVC car stereo systems. It provides instructions for proper setup, operation, and maintenance to ensure optimal performance and longevity of your remote control. Please verify that your original remote control matches the appearance of this replacement unit for compatibility.
2. Safety Information
Please read and understand all safety precautions before using this product. Failure to do so may result in damage to the product or personal injury.
- Battery Safety: This remote control requires one CR2025 lithium coin cell battery. Ensure correct polarity (+/-) when inserting the battery. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period.
- Environmental Conditions: Do not expose the unit to direct sunlight, extreme temperatures, high humidity, or corrosive environments.
- Compatibility: This is a replacement remote. It is crucial to confirm that your original remote control or JVC car stereo system model is listed as compatible. Refer to the product title for a list of compatible JVC models. If your model is not listed, contact the seller for assistance before use.
- Functionality: While designed as a direct replacement, some advanced or specific functions of your original remote may not be fully replicated.
3. Package Contents
Upon opening the package, please ensure all items are present and in good condition:
- 1 x Easytry123 Replacement Remote Control
- 1 x Mounting Clip (optional, for attaching to steering wheel or other surfaces)
4. Setup
4.1 Battery Installation
The remote control requires one CR2025 lithium coin cell battery (not included). Follow these steps to install the battery:
- Locate the battery compartment on the back of the remote control.
- Using a small coin or screwdriver, gently pry open the battery cover.
- Insert one CR2025 battery with the positive (+) side facing upwards, as indicated inside the compartment.
- Close the battery cover securely until it clicks into place.

Figure 1: Back view of the remote control with battery compartment. Note the caution label regarding CR2025 battery use.

Figure 2: Detailed view of the remote's back and the detachable mounting clip.
5. Operating Instructions
This remote control utilizes infrared (IR) technology. Ensure there is a clear line of sight between the remote's IR emitter (located at the top front) and the IR receiver on your JVC car stereo system.
5.1 Button Functions
The remote control features several buttons for common functions. Refer to the image below for button layout and the table for their descriptions.

Figure 3: Front view of the remote control with button layout.
| Button Label | Function |
|---|---|
| ⑁/ATT/SOUND | Power On/Off, Attenuate Audio, or Access Sound Settings. |
| SOURCE | Cycles through audio sources (e.g., Radio, CD, USB, Bluetooth). |
| U (Up Arrow) | Navigation Up, Seek Up, or Preset Up. |
| D (Down Arrow) | Navigation Down, Seek Down, or Preset Down. |
| R (Left Arrow) | Navigation Left, Reverse Track, or Fast Rewind. |
| F (Right Arrow) | Navigation Right, Forward Track, or Fast Forward. |
| VOL + | Increases audio volume. |
| VOL - | Decreases audio volume. |
6. Maintenance
Proper maintenance will extend the life of your remote control.
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the surface or internal components.
- Battery Replacement: If the remote control's range decreases significantly or it stops responding, the battery may need replacement. Follow the battery installation steps in Section 4.1.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
7. Troubleshooting
If you experience issues with your remote control, try the following troubleshooting steps:
- Remote Not Responding:
- Check the battery: Ensure the CR2025 battery is inserted correctly with the positive (+) side up and is not depleted. Replace if necessary.
- Line of Sight: Make sure there are no obstructions between the remote and the JVC stereo's IR receiver.
- Distance: Ensure you are within the effective operating range of the remote control.
- Intermittent Operation:
- Weak Battery: Replace the battery.
- Interference: Move away from strong light sources or other electronic devices that might cause IR interference.
- Specific Functions Not Working:
- Compatibility: Double-check if your specific JVC model is listed as compatible. Some advanced functions might not be supported by this replacement remote.
- Stereo Settings: Ensure the JVC stereo system is in the correct mode or source for the desired function (e.g., CD mode for CD playback controls).
If the issue persists after trying these steps, please contact the seller for further assistance.
8. Specifications
- Connectivity Technology: Infrared (IR)
- Compatible Devices: JVC Car Stereo Systems (KD-R881BT, KD-R981BT, KD-R980BTS, KD-R880BT, KD-X340BTS, KD-X240BT, KD-R885BTS, KW-SX83BTS, KD-T905BTS, and others as specified by the seller)
- Max Number of Supported Devices: 1 (controls one JVC stereo system at a time)
- Special Feature: Replacement remote, ergonomic design
- Battery Type: 1 x CR2025 Lithium Coin Cell (not included)
- Manufacturer: Easytry123
- ASIN: B0978LLHDS
9. Warranty and Support
As a replacement product, specific warranty details may vary. For any questions, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made. It is recommended to retain your purchase receipt for any support inquiries.





