Introduction
This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your Baridi 54 Bottle Wine Cellar Fridge. Please read this manual thoroughly before using the appliance and retain it for future reference.
Image: Front view of the Baridi 54 Bottle Wine Cellar Fridge, showcasing its sleek black design and glass door with visible wine bottles on wooden shelves.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Ensure the appliance is properly grounded.
- Do not operate the appliance with a damaged cord or plug.
- Keep ventilation openings clear of obstruction.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- This appliance is intended for household use only.
Setup and Installation
Unpacking
Carefully remove all packaging materials. Inspect the appliance for any damage. Retain packaging for future transport if needed.
Placement
Place the wine cellar on a flat, stable surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit. This model is designed to fit under standard height worktops.
Image: Diagram illustrating the dimensions of the wine cellar: Height 82cm, Depth 57cm, Width 60cm, indicating its suitability for under-counter installation.
Image: The Baridi wine cellar seamlessly integrated under a kitchen counter, demonstrating its "Made to Measure" design for standard height worktops.
Power Connection
Connect the appliance to a dedicated, properly grounded power outlet. Allow the unit to stand upright for at least 2-4 hours before plugging it in to allow refrigerants to settle.
Door Reversibility
The door is reversible, allowing for left or right-hand opening. Refer to the detailed instructions in the separate installation guide for door reversal procedures.
Operating Instructions
Digital Touch Screen Controls
The wine cellar features intuitive digital touch screen controls located on the top panel of the door. These controls allow you to adjust the temperature and manage internal lighting.
Image: Close-up view of the digital touch screen controls on the wine cellar, showing icons for power, light, temperature adjustment (up/down arrows), and temperature display in Celsius/Fahrenheit.
Temperature Adjustment
The temperature range for this wine cellar is between 5°C and 20°C. Use the Up and Down arrows on the touch screen to set your desired temperature. The display will show the current internal temperature.
Internal LED Light
Press the Light icon on the control panel to turn the internal LED light on or off. This light illuminates the interior for better visibility of your wine collection.
Loading Bottles
The wine cellar is designed to hold up to 54 standard 750ml wine bottles. Arrange bottles on the removable beech wooden shelves. Ensure bottles are placed securely to prevent rolling.
Image: The wine cellar filled with numerous wine bottles, highlighting its large capacity of up to 54 regular wine bottles.
Image: Close-up view of the stylish wooden shelves made from high-quality beech wood inside the wine cellar.
Maintenance
Cleaning
Unplug the appliance before cleaning. Clean the interior and exterior with a soft cloth and mild detergent. Do not use abrasive cleaners or solvents. The wooden shelves can be removed for easier cleaning.
Automatic Defrost
This wine cellar features an automatic defrost function, minimizing the need for manual defrosting. If excessive ice build-up occurs, unplug the unit and allow it to defrost naturally, then wipe dry.
Power Outage
In case of a power outage, keep the door closed to maintain the internal temperature for as long as possible. The unit will resume operation automatically once power is restored.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not operate | Not plugged in; Circuit breaker tripped; Temperature set too high. | Check power connection; Reset circuit breaker; Lower temperature setting. |
| Temperature is not cold enough | Door not closed properly; Excessive door opening; Unit placed near heat source; Overloaded with bottles. | Ensure door is sealed; Reduce frequency of door opening; Relocate unit; Do not overload. |
| Unit is noisy | Unit not level; Vibrating against wall/cabinet; Normal compressor operation. | Adjust leveling feet; Ensure clearance; Normal operating sounds are expected (41dB). |
| Condensation inside | High humidity; Frequent door opening. | This is normal in humid conditions; Reduce door opening. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Dellonda (Baridi) |
| Model | DH78 |
| Capacity | 135 Litres / 54 Bottles |
| Product Dimensions (HxWxD) | 82 x 59.5 x 57 cm |
| Item Weight | 43 kg |
| Temperature Range | 5-20°C |
| Annual Energy Consumption | 144 KWh/a |
| Noise Level | 41 dB |
| Defrost System | Automatic |
| Special Features | Reversible door, Digital Touch Screen Controls, Wooden Shelves, Internal LED Light |
Image: Energy efficiency label for the Baridi DH78 wine cellar, showing a G rating, 144 kWh/annum energy consumption, 54 bottle capacity, and 41dB noise level.
For detailed product information, refer to the EU EPREL Database.
Warranty and Support
Dellonda products come with a warranty for peace of mind. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dellonda website.
For technical support, troubleshooting assistance, or spare parts, please contact Dellonda customer service. Contact details can typically be found on the manufacturer's website or in your purchase documentation.
You can also visit the Dellonda Store on Amazon for more information and product range.
