1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your VIGO Apollo VG03031MG Button Operated Single-Hole Bathroom Vessel Faucet. Designed for modern bathrooms, this faucet features a durable solid brass body, a sophisticated matte brushed gold finish, and a convenient button-operated water flow control. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.
Image 1: The VIGO Apollo Matte Brushed Gold Vessel Faucet, showcasing its sleek design and finish.
2. Safety Information
- Always shut off the main water supply before installing or performing any maintenance on the faucet.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all local plumbing and building codes are met during installation.
- If you are unsure about any part of the installation process, consult a qualified professional plumber.
- California Residents: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
3. Package Contents
Verify that all components are present before beginning installation:
- VIGO Apollo Faucet Body
- Mounting Hardware
- Supply Lines (Hot and Cold)
- Installation Manual
Image 2: Close-up of the faucet base, indicating the VIGO branding.
4. Specifications
| Feature | Detail |
|---|---|
| Model Name | Apollo |
| Model Number | VG03031MG |
| Material | Solid Brass |
| Finish | Matte Brushed Gold |
| Mounting Type | Deck Mount, Single-Hole |
| Faucet Height | 11.5 inches (29.2 cm) |
| Spout Height | 7.5 inches (19.1 cm) |
| Spout Reach | 6 inches (15.2 cm) |
| Flow Rate | 1.2 Gallons Per Minute (GPM) |
| Maximum Deck Thickness | 2 inches (5.1 cm) |
| Faucet Hole Size | 1-3/8 inches (3.5 cm) |
| Number of Handles | 1 (Button Operated) |
| Certifications | cUPC, NSF-61, AB1953 (Lead-Free Compliance) |
Image 3: Dimensional drawing illustrating the faucet's key measurements.
5. Installation
The VIGO Apollo faucet is designed for straightforward DIY installation. Follow these steps for a secure and leak-free setup:
- Prepare the Mounting Surface: Ensure your sink or countertop has a standard 1-3/8 inch (3.5 cm) diameter hole. The maximum deck thickness supported is 2 inches (5.1 cm).
- Install the Faucet: Insert the faucet body through the hole in the sink or countertop. From underneath, secure the faucet using the provided mounting hardware. Tighten firmly but do not overtighten.
- Connect Water Supply Lines: Attach the hot and cold water supply lines to the corresponding connections on the faucet and your water supply valves. The faucet uses standard US 3/8-inch plumbing connections. Ensure all connections are hand-tightened, then use a wrench for a final quarter-turn. Do not overtighten.
- Check for Leaks: Once all connections are secure, slowly turn on the main water supply and check for any leaks. Address any leaks immediately by tightening connections as needed.
Image 4: The VIGO Apollo faucet elegantly installed on a bathroom vanity with a vessel sink.
6. Operation
The VIGO Apollo faucet features a unique button-operated design for water control:
- Water Flow Activation: Press the button located on top of the faucet to turn the water flow on or off.
- Temperature Control: Rotate the knurled top section of the faucet to adjust the water temperature. Turning it clockwise typically decreases temperature, while counter-clockwise increases it.
- The faucet operates at an efficient 1.2 GPM flow rate, providing ample water pressure while conserving water.
Image 5: Water flowing from the VIGO Apollo faucet into a vessel sink, demonstrating its functionality.
7. Maintenance
Proper care will ensure the lasting beauty and performance of your VIGO Apollo faucet:
- Cleaning the Finish: The matte brushed gold finish is designed to resist fingerprints and water spots. Clean regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Aerator Maintenance: The faucet features a replaceable and easy-to-clean aerator. If water flow becomes restricted or irregular, unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Cartridge Care: The faucet is equipped with an exceptionally durable Sedal ceramic disc valve, designed for over 500,000 uses, ensuring long-term leak-free performance. No regular maintenance is typically required for the cartridge.
Image 6: Close-up view of the faucet spout, highlighting the aerator for easy maintenance.
8. Troubleshooting
If you encounter any issues with your VIGO Apollo faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or low water pressure | Water supply turned off; clogged aerator; kinked supply line. | Ensure water supply is on; clean or replace aerator; check supply lines for obstructions. |
| Leaking from faucet base | Loose mounting nut; damaged O-rings. | Tighten mounting nut from underneath; inspect and replace O-rings if damaged. |
| Leaking from spout | Damaged aerator washer; worn cartridge. | Check and replace aerator washer; if issue persists, contact VIGO support for cartridge replacement. |
| Inconsistent water temperature | Improper adjustment; issue with water heater. | Adjust temperature control knob; check water heater settings. |
If the problem persists after attempting these solutions, please contact VIGO customer support for further assistance.
9. Warranty and Support
Your VIGO Apollo faucet is covered by VIGO's limited lifetime warranty for residential use and a 1-year commercial warranty. This warranty covers defects in material and workmanship under normal use. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official VIGO website.
For technical support, replacement parts, or warranty claims, please contact VIGO customer service. Have your model number (VG03031MG) and proof of purchase ready when contacting support.
VIGO products meet essential industry standards, including cUPC (Certified to Uniform Plumbing Code), NSF-61 (National Sanitation Foundation), and AB1953 (Lead-Free Compliance), ensuring quality and safety.
