SP Connect Wireless Charging Module 2020 Instruction Manual

1. Introduction

The SP Connect Wireless Charging Module provides a weatherproof solution for wirelessly charging your smartphone while on the go. Designed for seamless integration with SP Connect mounting systems, this module ensures your device remains powered during cycling, motorcycling, or other outdoor activities. It features inductive charging technology for reliable power transfer through an SPC Phone Case and is built with durable, weather-resistant materials.

Image 1.1: SP Connect Wireless Charging Module, shown with a compatible phone and mount (sold separately).

2. Package Contents

Please verify that all items are present in your package:

• SP Connect Wireless Charging Module
• Waterproof USB Cable

Note: SP Connect phone cases and mounting solutions are sold separately and are required for full functionality.

3. Setup and Installation

Follow these steps to set up your Wireless Charging Module:

1. Attach to SP Connect Mount: The Wireless Charging Module is designed to attach to any compatible SP Connect mounting head. Align the module with the mount and rotate it 90 degrees clockwise until it securely locks into place. Ensure a firm connection to prevent accidental detachment.


Image 3.1: Bottom view of the module, illustrating the secure mounting mechanism.

2. Connect Power: Insert the waterproof USB cable into the charging module's port. Connect the other end of the USB cable to a suitable power source (e.g., a USB port on your vehicle, a power bank, or a USB wall adapter). Ensure the power source provides adequate output for wireless charging.
3. Prepare Your Phone: Your smartphone must be housed in an SP Connect Phone Case to utilize the wireless charging feature with this module. The case ensures proper alignment and inductive power transfer.


Image 3.2: Module installed on a motorcycle handlebar, ready for phone attachment.

4. Operating Instructions

Once the module is installed and powered, follow these steps to charge your smartphone:

1. Attach Phone: With your smartphone in an SP Connect Phone Case, align the phone case with the Wireless Charging Module. Rotate the phone 90 degrees clockwise until it locks securely onto the module.


Image 4.1: Smartphone securely attached to the charging module on a bicycle mount.

2. Initiate Charging: Once the phone is securely attached, wireless charging will begin automatically. Your phone's screen or notification area should indicate that it is charging.
3. Weather Protection: The module and its waterproof USB cable are designed for use in various weather conditions. Ensure the USB cable connection is fully seated to maintain its waterproof integrity.
4. Remove Phone: To remove your phone, rotate it 90 degrees counter-clockwise and lift it off the module.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Wireless Charging Module:

• Cleaning: Use a soft, damp cloth to clean the module. Avoid abrasive cleaners or solvents that could damage the surface or internal components.
• Cable Care: Inspect the waterproof USB cable regularly for any signs of wear or damage. Ensure the connection points are clean and free of debris.
• Storage: When not in use for extended periods, store the module in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your Wireless Charging Module, refer to the following common problems and solutions:

• Phone Not Charging:
  • Ensure the USB cable is securely connected to both the module and the power source.
  • Verify that the power source is active and providing sufficient power (e.g., 5V/2A or higher).
  • Confirm your smartphone is correctly seated in an SP Connect Phone Case and securely locked onto the charging module.
  • Check if your phone supports Qi wireless charging.
  • Remove any foreign objects between the phone case and the charging module.
• Module Feels Loose on Mount:
  • Ensure the module was rotated a full 90 degrees clockwise until it clicked firmly into place on the SP Connect mount.
  • Inspect the mounting mechanism on both the module and the mount for any damage or wear.
• Overheating During Charging:
  • While the module is designed for optimal thermal management, ensure it is not exposed to direct, intense sunlight for prolonged periods, especially in hot environments.
  • Ensure there is adequate airflow around the module and phone.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the official SP Connect website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

Online Resources: Visit the SP Connect official website for FAQs, product registration, and additional support materials.

Customer Service: Contact details for customer support can typically be found on the SP Connect website.