Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Moultrie A900i Game Trail Camera. Please read this manual thoroughly before using your camera to ensure optimal performance and longevity. The Moultrie A900i is designed to capture high-quality images and videos of wildlife with its 30 MP resolution and fast trigger speed.
Package Contents
Verify that all items are present in your package:
- Moultrie A900i Game Camera (4 units)
- Heavy-duty Camera Strap (4 units)
- 16GB SD Card (4 units)
- AA Batteries (8 per camera, 32 total)
- Moultrie Window Decal (4 units)
Image: Four Moultrie A900i game cameras, each accompanied by a 16GB SD card and a set of AA batteries, illustrating the bundle contents.
Setup
1. Battery Installation
- Open the camera housing latch.
- Locate the battery compartment.
- Insert eight (8) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment securely.
2. SD Card Installation
- With the camera housing open, locate the SD card slot.
- Insert the 16GB SD card into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- To remove, press the SD card gently inward until it clicks, then release to eject.
3. Mounting the Camera
Use the provided heavy-duty camera strap to secure the camera to a tree or post. Ensure the camera is stable and pointed towards the desired monitoring area. Adjust the angle to avoid direct sunlight into the lens, which can cause overexposure.
Operating Instructions
1. Powering On/Off
- To power on, slide the power switch to the "ON" position. The camera will perform a self-check.
- To power off, slide the power switch to the "OFF" position.
2. Mode Selection
The A900i offers various capture modes:
- Photo Mode: Captures still images. Can be set to 1 photo per trigger in low or high resolution.
- Video Mode: Records 1280x720 HD video clips.
- Multi-Shot Mode: Captures multiple photos per trigger (e.g., 3 photos) in either high or low resolution.
Refer to the camera's internal menu for detailed settings and mode selection. Use the navigation buttons to scroll through options and the 'OK' button to confirm selections.
3. Settings Configuration
Access the camera's menu to adjust settings such as:
- Resolution: Adjust image (up to 30 MP) and video (1280x720 HD) quality.
- Trigger Delay: Set the delay between detections.
- Date/Time Stamp: Ensure accurate time and date are recorded on images/videos.
- Illumi-Night Sensor: This feature automatically optimizes nighttime images for brightness and clarity. No manual adjustment is typically required for its core function.
Maintenance
1. Cleaning
Periodically clean the camera lens and PIR sensor window with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals. Ensure the camera housing is free of dirt and debris, especially around seals, to maintain weather resistance.
2. Battery Replacement
Replace all batteries simultaneously with new, high-quality AA alkaline or lithium batteries. Do not mix old and new batteries or different battery types. Dispose of used batteries responsibly.
3. SD Card Management
Regularly check the SD card capacity. Format the SD card periodically using the camera's menu option to ensure optimal performance and prevent data corruption. Back up important files before formatting.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on | Dead or incorrectly installed batteries | Replace all batteries with new ones, ensuring correct polarity. |
| No images/videos captured | Full SD card, incorrect settings, PIR sensor blocked | Format or replace SD card. Check camera mode and settings. Clear any obstructions from the PIR sensor. |
| Poor image quality at night | Low battery power, lens obstruction | Ensure fresh batteries are used. Clean the camera lens. |
| False triggers | Camera pointed at moving branches, heat sources | Reposition the camera to avoid environmental triggers. Adjust trigger sensitivity if available. |
Specifications
- Resolution: Up to 30 Megapixels
- Video Resolution: 1280x720 HD
- Trigger Speed: 0.4 seconds
- Sensor: Illumi-Night Sensor for optimized night images
- Storage: Supports up to 16GB SD cards
- Power: 8 AA Batteries (not included in camera unit, but included in bundle)
- Connectivity: Wireless
- Special Feature: Motion Sensor
- Recommended Use: Game & Trail Monitoring
- Usage Environment: Outdoor
Warranty and Support
For warranty information and technical support, please refer to the official Moultrie website or contact Moultrie customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Moultrie Official Website: www.moultriefeeders.com