Important Safety Information
Read and understand all instructions before setting up and using this product. Failure to follow these instructions may result in serious injury or death. Keep this manual for future reference.
- Adult supervision is required at all times when children are in or near the pool.
- Do not dive or jump into the pool.
- Ensure the pool is set up on level ground, free of sharp objects.
- Do not overinflate the top ring.
- Empty the pool completely when not in use to prevent water accumulation and potential drowning hazards.
- Keep children away from the drain valve when emptying the pool.
Product Overview
The AVENLI Family Inflatable Swimming Pool is designed for easy setup and enjoyment. It features a durable 3-ply material construction and an inflatable top ring for quick assembly.
Image: The AVENLI Family Inflatable Swimming Pool, a round blue pool with an inflatable top ring, filled with water. The AVENLI logo is visible on the side.
This pool is suitable for families and can hold approximately 956 gallons (3618 liters) of water at 80% capacity. Its dimensions are 10 feet in diameter and 30 inches in height (120"L x 120"W x 30"H).
Setup Instructions
Follow these steps for quick and easy setup of your inflatable swimming pool. The pool can be ready for water in approximately 10 minutes.
- Site Preparation: Choose a level, flat area in your backyard, free from sharp objects, debris, or uneven surfaces. Ensure the ground is firm enough to support the weight of the filled pool.
- Unpack and Spread: Carefully unpack the pool from its packaging. Spread the pool out completely on the prepared level ground. Ensure the bottom of the pool is smooth and free of wrinkles.
- Inflate Top Ring: Locate the air valve on the top inflatable ring of the pool. Using an air pump (not included), inflate the top ring until it is firm to the touch but not overinflated. Do not use a high-pressure air compressor.
- Fill with Water: Begin filling the pool with water. As the water level rises, the inflatable top ring will float and help the pool walls rise and take shape. Smooth out any remaining wrinkles on the bottom as the pool fills.
- Monitor Water Level: Fill the pool to the recommended fill line, typically indicated on the inside of the pool wall, or to approximately 80% capacity (956 gallons / 3618 liters). Do not overfill.
Image: A visual guide showing the three main steps for setting up the pool: A) Inflating the top ring, B) Smoothing the bottom as water fills, and C) The pool fully set up and ready.
Image: The blue inflatable pool set up in a lush green backyard, demonstrating a suitable environment for placement.
Operating the Pool
Once set up and filled, your AVENLI inflatable pool is ready for use. Always ensure proper supervision, especially when children are present.
- Water Quality: Maintain proper water chemistry for hygiene and longevity of the pool material. Consult a local pool supply store for recommended chemicals and testing kits.
- Filter Pump (Optional): This pool is designed to accommodate an optional filter pump (not included). If you choose to use one, connect it according to the pump manufacturer's instructions using the 32mm connections provided on the pool.
- Supervision: Never leave children unattended in or around the pool.
Image: A family of five, including adults and children, enjoying the blue inflatable swimming pool, demonstrating typical use.
Maintenance
Regular maintenance will extend the life of your pool and ensure a clean swimming environment.
- Cleaning: Regularly remove debris from the water surface and bottom. Use a soft brush or pool vacuum designed for inflatable pools if necessary.
- Water Treatment: Follow guidelines for water treatment to prevent algae growth and maintain sanitation.
- Draining the Pool: When it's time to empty the pool, locate the drain valve at the bottom side of the pool. Connect a garden hose to the drain valve adapter (included) to direct the water away from your property. Open the valve to allow the water to drain completely.
- Storage: After draining, clean and thoroughly dry the pool before folding it for storage. Store in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
Image: Close-up view of the pool's drain valve with a garden hose adapter and the 32mm connections for an optional filter pump, illustrating key maintenance points.
Troubleshooting
This section addresses common issues you might encounter with your inflatable pool.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pool losing air from top ring | Air valve not sealed properly, puncture in top ring. | Ensure valve cap is securely closed. Inspect the ring for punctures; use a vinyl repair kit (not included) if a small hole is found. |
| Water level decreasing rapidly | Leak in pool liner, drain valve not fully closed. | Check the drain valve for a secure seal. Inspect the pool liner for punctures, especially on the bottom and lower sides. Use a vinyl repair kit for small leaks. |
| Pool not standing upright when filling | Ground is not level, top ring not sufficiently inflated. | Ensure the pool is on a completely level surface. Inflate the top ring more firmly, but do not overinflate. |
Specifications
Detailed specifications for the AVENLI Family Inflatable Swimming Pool, Model Avenli Prompt Set.
| Feature | Detail |
|---|---|
| Brand | AVENLI |
| Model Number | Avenli Prompt Set |
| Product Dimensions | 120"L x 120"W x 30"H (10 ft x 30 inches) |
| Shape | Round |
| Color | Blue |
| Material | Polyvinyl Chloride (PVC) - 3-ply material |
| Water Capacity | 956 gallons (3618 Liters) at 80% capacity |
| Included Components | Pool, Drain Valve Adapter (Filter Pump not included) |
| Assembly Required | Yes |
| Special Feature | Inflatable, Puncture Resistant |
| Item Weight | 17.71 pounds |
| UPC | 650327419544 |
Warranty and Support
Specific warranty information for this product is not provided within this manual. Please refer to the product packaging or contact AVENLI customer support for details regarding warranty coverage and support services.
For further assistance or inquiries, please visit the official AVENLI website or contact their customer service department. Contact information may be available on the product packaging or through the retailer where the product was purchased.
