1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Ariete Stiromatic Compact solenoid valve and coil. This component is an original Ariete replacement part designed for use with Ariete Stiromatic Compact steam iron models 6253, 6254, and 6265. Please read these instructions thoroughly before proceeding with installation or any related procedures.
Image 1: Ariete Stiromatic Compact Solenoid Valve and Coil. This image shows the complete solenoid valve assembly, including the coil, ready for installation.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the appliance:
- Disconnect Power: Before attempting any installation, maintenance, or repair, always ensure the steam iron is unplugged from the electrical outlet and has completely cooled down.
- Professional Installation: Installation of this component should ideally be performed by a qualified technician due to the electrical and pressurized steam systems involved.
- Electrical Hazards: Never operate the steam iron with damaged wiring or if the component itself appears damaged.
- Burn Hazard: Steam irons operate at high temperatures and pressures. Allow the appliance to cool completely before handling internal components.
- Water Leaks: Ensure all connections are secure and watertight after installation to prevent leaks and potential electrical hazards.
- Original Parts: Use only original Ariete replacement parts to ensure compatibility and safety.
3. Components Overview
The product you have received consists of the following main parts:
- Solenoid Valve Body: The mechanical part that controls the flow of steam.
- Solenoid Coil: The electrical component that, when energized, actuates the valve.
This assembly is designed to regulate the steam output from your Ariete Stiromatic Compact steam iron's boiler.
4. Installation Instructions
Follow these steps carefully for proper installation:
- Preparation:
- Ensure the steam iron is unplugged from the power supply.
- Allow the iron to cool down completely to avoid burns.
- Place the iron on a stable, flat surface.
- Accessing the Valve:
- Carefully open the casing of your Ariete Stiromatic Compact steam iron to access the internal components. Refer to your iron's specific service manual if available for detailed disassembly instructions.
- Locate the existing solenoid valve assembly.
- Removing the Old Valve:
- Disconnect the electrical wires connected to the solenoid coil. Note their original positions for correct re-connection.
- Carefully disconnect the steam hoses or pipes connected to the valve. Be prepared for residual water.
- Unmount the old solenoid valve from its housing.
- Installing the New Valve:
- Mount the new Ariete solenoid valve in the same position as the old one, ensuring it is securely fastened.
- Reconnect the steam hoses or pipes to the new valve. Ensure all connections are tight and properly sealed to prevent leaks. The threaded connection diameter is 9.5 mm, and the steam hose connection diameter is 5.8 mm to 6.2 mm.
- Reconnect the electrical wires to the new solenoid coil, matching the original configuration.
- Testing:
- Before fully reassembling the iron, perform a preliminary test. Plug in the iron and allow it to heat up.
- Activate the steam function and observe the valve's operation and check for any leaks from the connections.
- If no issues are detected, unplug the iron, allow it to cool, and then reassemble the casing.
Compatibility Check: The data for your product can usually be found on the identification plate, typically located under the appliance. Please verify the list of compatible products. If your model is not listed, contact the seller or manufacturer for assistance.
5. Operating Principle
The solenoid valve and coil assembly is an integral part of your steam iron's steam generation system. It functions as an electrically controlled switch for steam flow. When the steam button on your iron is pressed, an electrical current is sent to the solenoid coil. This energizes the coil, creating a magnetic field that pulls a plunger, opening the valve. This allows pressurized steam from the boiler to flow to the iron's soleplate. When the button is released, the coil de-energizes, and a spring returns the plunger to its closed position, stopping the steam flow.
As a component, the solenoid valve does not require direct user operation beyond the normal use of the steam iron's controls.
6. Maintenance
The Ariete solenoid valve and coil are designed for durability and typically require minimal maintenance. However, periodic inspection can help ensure longevity:
- Visual Inspection: Periodically, if the iron's casing is opened for other maintenance, visually inspect the valve and its connections for any signs of wear, corrosion, or steam leakage.
- Connection Integrity: Ensure that all electrical connections to the coil and all steam hose connections to the valve remain secure and free from damage.
- Cleaning: Keep the area around the valve clean and free from mineral deposits or debris that could impede its function.
Do not attempt to disassemble the valve body or coil unless you are a qualified technician, as this may damage the component or void any potential warranty.
7. Troubleshooting
If you experience issues with your steam iron after replacing the solenoid valve, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam output |
|
|
| Continuous steam output |
|
|
| Steam or water leaks from valve connections |
|
|
If you are unable to resolve the issue after following these steps, please contact a qualified service technician or Ariete customer support.
8. Technical Specifications
| Feature | Specification |
|---|---|
| Product Type | Solenoid Valve + Coil |
| Brand | Ariete |
| Compatible Models | Ariete Stiromatic Compact 6253, 6254, 6265 |
| Voltage | AC 230 V, 50 Hz |
| Power Consumption | 9 ~ 12 VA |
| Duty Cycle | ED 100 % |
| Ambient Temperature (TA) | 140 °C |
| Fluid Temperature (TF) | 160 °C |
| Insulation Class | H |
| Protection Class | I IP00 |
| Pressure Range (P) | 0.1 – 6 bar |
| Valve Type | 2-way |
| Threaded Connection Diameter | 9.5 mm |
| Steam Hose Connection Diameter | 5.8 mm ~ 6.2 mm |
| Certifications | VDE, TUV, CE, CQC |
| Product Dimensions (L x W x H) | 5 x 4 x 2 cm |
| Item Weight | 100 g |
9. Warranty and Support
As an original replacement part, this solenoid valve and coil are covered by Ariete's standard warranty for spare parts. Please retain your proof of purchase for any warranty claims.
For technical support, warranty inquiries, or to verify product compatibility (using product codes like 00S625300AR0, 00S625301ALUK, 00S625302AR0, 00S625303AR0, 00S625303ARID, 00S625400AR0, 00S626500MZIT), please contact Ariete customer service or the authorized reseller from whom you purchased this component. Information regarding spare parts availability may vary.
