Introduction
This manual provides essential instructions for the safe and efficient operation of your Brother FS40s Electronic Sewing Machine. Please read this manual thoroughly before using the machine to ensure proper setup, operation, and maintenance. Keep this manual in a safe place for future reference.
Safety Precautions
- Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.
- Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
- Use only accessories recommended by the manufacturer as contained in this manual.
- Never operate the sewing machine if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
- Do not use outdoors.
Setup
1. Unpacking and Placement
Carefully remove the machine from its packaging. Place the machine on a stable, level surface. Ensure there is adequate lighting and space for comfortable operation.
2. Power Connection
Connect the power cord to the machine and then to a suitable electrical outlet. Ensure the power switch is in the "OFF" position before connecting.
3. Winding the Bobbin
Follow the instructions in your quick start guide for winding the bobbin correctly. A properly wound bobbin is crucial for smooth sewing.
4. Threading the Upper Thread
Guide the upper thread through the machine's threading path as indicated by the numbered guides. The Brother FS40s features an automatic needle threader for ease of use.

Image: Hands guiding the thread through the machine's upper threading path, demonstrating the threading process.
5. Inserting the Bobbin
Insert the wound bobbin into the bobbin case according to the machine's specific instructions. Ensure the thread is correctly routed through the tension spring.
Operating Instructions
1. Selecting a Stitch
The Brother FS40s offers 40 different stitch patterns. Use the selection buttons and the LCD screen to choose your desired stitch. The LCD screen will display the selected stitch number and recommended stitch length/width.

Image: Close-up of the Brother FS40s LCD screen and stitch selection buttons, showing a stitch pattern and settings.
2. Adjusting Stitch Length and Width
Adjust the stitch length and width using the dedicated buttons or dials as needed for your fabric and project. Refer to the stitch chart for recommended settings.
3. Using the Automatic Needle Threader
To use the automatic needle threader, ensure the needle is in its highest position. Follow the machine's specific steps to engage the threader and pass the thread through the needle eye.

Image: Detailed view of the needle, presser foot, and automatic needle threader mechanism on the Brother FS40s.
4. Sewing with the Free Arm
To use the free arm for sewing cuffs, sleeves, or other small, circular items, remove the accessory box. This exposes the narrow free arm, allowing fabric to be easily maneuvered.
5. Starting and Stopping Sewing
Lower the presser foot, then gently press the foot controller (or start/stop button if using without the foot controller) to begin sewing. Guide the fabric smoothly. Press the foot controller again or the start/stop button to stop.

Image: A user seated at the Brother FS40s, operating the machine and selecting functions on the control panel.
Maintenance
1. Cleaning the Machine
Regularly clean the bobbin area, feed dogs, and tension discs using the brush provided. Always unplug the machine before cleaning. Remove lint and dust to prevent sewing issues.
2. Changing the Needle
Change the needle frequently, especially when starting a new project or if the needle becomes bent or dull. Use only needles suitable for your machine and fabric type. Ensure the flat side of the needle faces the back.
3. Lubrication
The Brother FS40s is designed to be largely maintenance-free regarding lubrication. Refer to your specific model's manual for any recommended oiling points, if applicable.
Troubleshooting
This section addresses common issues you might encounter. For more detailed troubleshooting, refer to the full manual or Brother's support resources.
1. Skipped Stitches
- Check if the needle is bent or dull; replace if necessary.
- Ensure the needle is inserted correctly and fully.
- Verify that the correct needle type is being used for the fabric.
- Re-thread the upper thread and bobbin.
2. Thread Breaking
- Check for incorrect threading of the upper thread or bobbin.
- Ensure the thread tension is not too tight.
- Inspect the needle for burrs or damage.
- Use good quality thread.
3. Fabric Not Feeding Properly
- Ensure the presser foot is lowered.
- Check if the feed dogs are engaged (not dropped).
- Use the correct presser foot for your fabric type.
Specifications
| Feature | Detail |
|---|---|
| Model Number | FS40s |
| Brand | Brother |
| Product Type | Electronic Sewing Machine |
| Number of Stitches | 40 |
| Needle Threader | Automatic |
| Display | LCD Screen |
| Free Arm | Yes |
| Power Source | Electric Cable |
| Color | White |
| Material | Plastic |
| Product Dimensions (D x W x H) | 15D x 31W x 29H centimeters |
| Item Weight | 2.95 kg (6.51 lbs) |
| Country of Origin | USA |
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Brother website. Keep your proof of purchase for warranty claims.
Online resources, including FAQs and video tutorials, may also be available on the manufacturer's support pages.