GENBOLT GB217P Waterproof Solar Panel Instruction Manual

1. Introduction

Thank you for choosing the GENBOLT GB217P Waterproof Solar Panel. This manual provides essential information for the proper installation, operation, and maintenance of your solar panel, ensuring continuous power supply for your compatible GENBOLT battery surveillance camera.

This solar panel is designed to provide a reliable and eco-friendly power source for your GENBOLT GB217K battery camera, eliminating the need for frequent battery recharges.

2. What's in the Box

• GENBOLT Solar Panel (GB217P)
• 4-meter USB Cable
• Mounting Bracket
• Screws and Wall Plugs

Image: Included components and dimensions. The solar panel measures approximately 14cm by 20cm, and the cable length is 9.8 feet (approximately 3 meters). The mounting bracket is also shown.

3. Safety Information

• Read all instructions carefully before installation and use.
• Keep the device away from children.
• Do not attempt to disassemble, repair, or modify the solar panel. This will void the warranty and may cause damage or injury.
• Use only with compatible GENBOLT battery surveillance cameras.
• Ensure the mounting location is stable and secure to prevent the panel from falling.
• Avoid exposing the USB connector to water or moisture unless properly sealed.

4. Product Overview

The GENBOLT GB217P is a 7W/5V waterproof solar panel featuring a high-efficiency design and durable tempered glass and aluminum construction. It is specifically engineered to work with GENBOLT battery-powered surveillance cameras, such as the GB217K model, providing a continuous power supply via its 4-meter USB cable.

Image: The GENBOLT solar panel, showcasing its sleek design and solar cells.

Image: The solar panel is shown alongside a GENBOLT battery camera (GB217K model), indicating compatibility and its function to keep the camera's battery continuously charged.

5. Setup

5.1 Choosing a Location

Select a location that receives direct sunlight for most of the day. Avoid areas shaded by trees, buildings, or other obstructions. Optimal performance is achieved with maximum sun exposure.

Image: The solar panel is mounted on an outdoor wall, positioned to capture sunlight, demonstrating its suitability for outdoor use to continuously power a battery camera.

5.2 Mounting the Solar Panel

1. Mark the desired drilling points on the wall using the mounting bracket as a template.
2. Drill holes at the marked positions and insert the wall plugs.
3. Attach the mounting bracket to the wall using the provided screws.
4. Secure the solar panel to the mounting bracket.
5. Adjust the panel's angle and rotation for optimal sunlight exposure. The bracket allows for 360-degree rotation and 90-degree tilt adjustment.

Image: A diagram showing the flexibility of the wall mount, allowing for 360-degree rotation and 90-degree vertical adjustment to optimize solar panel positioning.

5.3 Connecting to the Camera

Connect the 4-meter USB cable from the solar panel to the charging port of your compatible GENBOLT battery surveillance camera (e.g., GB217K). Ensure the connection is secure and the waterproof cap (if applicable) is properly sealed to prevent moisture ingress.

Image: The back of the solar panel, illustrating the attachment point for the mounting bracket and the connection point for the USB cable.

6. Operating Instructions

Once connected and exposed to sunlight, the solar panel will automatically begin charging your camera's battery. The charging status may be indicated by your camera's LED indicator or within its mobile application. The panel is designed for continuous power supply, reducing the need for manual battery charging.

7. Maintenance

• Cleaning: Regularly inspect the solar panel surface for dirt, dust, leaves, or debris. Clean the panel with a soft, damp cloth to ensure maximum light absorption. Avoid abrasive cleaners or harsh chemicals.
• Connections: Periodically check all cable connections to ensure they remain secure and free from corrosion.
• Obstructions: Ensure no new obstructions (e.g., growing foliage) are blocking sunlight to the panel.

8. Troubleshooting

• Camera not charging:
  • Verify the solar panel is receiving direct sunlight.
  • Check the USB cable connection at both the panel and the camera for security.
  • Ensure the camera is compatible with the GENBOLT GB217P solar panel (e.g., GB217K).
  • Clean the solar panel surface from any dirt or debris.
• Low charging efficiency:
  • Adjust the panel's angle and position to maximize direct sunlight exposure throughout the day.
  • Ensure no partial shading occurs from nearby objects.
  • Verify the panel surface is clean.

9. Specifications

10. Warranty and Support

For technical assistance or support, please contact GENBOLT customer service through their official website or the platform where the product was purchased.

Spare parts availability: Information unavailable.

Software updates guaranteed until: Information unavailable.