MERITLINE Wood Daybed with Drawers

Download PDF
Contents

MERITLINE Full Size Wood Daybed with Storage Drawers Instruction Manual

Model: Wood Daybed with Drawers

1. Important Safety Information

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage to the product.

  • Always assemble according to the provided instructions.
  • Do not overload the drawers.
  • Be cautious of sharp edges and pinch points when converting the daybed into a sofa bed.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
  • Keep small parts away from children during assembly.

2. Setup & Assembly

Assembly of the MERITLINE Full Size Wood Daybed is required. It is recommended that two adults perform the assembly. Please ensure all parts are present before beginning.

2.1 Unpacking and Part Identification

Carefully unpack all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify all parts against the included parts list (not provided in this manual, refer to your product packaging).

MERITLINE Full Size Wood Daybed with Storage Drawers, Espresso

Figure 1: Fully assembled MERITLINE Full Size Wood Daybed in Espresso finish, shown with a mattress and decorative pillows, and two storage drawers pulled out.

2.2 Assembly Steps (General Guidance)

  1. Frame Assembly: Begin by connecting the main frame components (headboard, footboard, side rails) using the provided hardware. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.
  2. Slat Installation: Once the main frame is stable, install the wooden slats across the bed frame. These provide support for the mattress. Ensure they are evenly spaced and secured according to the specific instructions.
  3. Drawer Assembly: Assemble the storage drawers. This typically involves attaching the front, back, and side panels, then installing the bottom panel. Attach any handles or wheels as directed.
  4. Final Tightening: Once all components are in place, go back and fully tighten all bolts and screws. Do not overtighten.
MERITLINE Daybed frame with wooden slats and two storage drawers

Figure 2: View of the daybed frame showing the wooden slat support system and the two pull-out storage drawers beneath.

Side view of MERITLINE Daybed with storage drawers

Figure 3: Side perspective of the MERITLINE daybed, highlighting the integrated storage drawers and the sturdy wooden frame construction.

3. Operation

3.1 Using as a Daybed/Sofa

The MERITLINE daybed is designed to function as both a comfortable bed and a stylish sofa. Place a full-size mattress (not included) on the wooden slats. For sofa use, arrange pillows along the back and sides for support.

3.2 Utilizing Storage Drawers

The two integrated drawers provide convenient storage space. To open, gently pull the drawer fronts outwards. To close, push them back into the frame until they are flush. Avoid forcing the drawers if they encounter resistance.

Front view of MERITLINE Daybed with storage drawers

Figure 4: Front view of the MERITLINE daybed, showcasing the two spacious storage drawers integrated seamlessly into the base.

4. Maintenance

  • Cleaning: Wipe the wooden surfaces with a soft, dry cloth. For stubborn marks, a slightly damp cloth followed immediately by a dry cloth can be used. Avoid harsh chemicals or abrasive cleaners.
  • Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and prevent squeaking.
  • Drawer Care: Keep the drawer paths free of debris. If drawers become stiff, ensure they are not overloaded and check for any obstructions.
  • Avoid Overloading: Do not exceed the weight capacity of the drawers or the bed frame.

5. Troubleshooting

ProblemPossible CauseSolution
Bed is wobbly or unstable.Loose hardware.Check and tighten all bolts and screws.
Squeaking noises.Loose connections or friction between wood parts.Re-tighten all hardware. Apply a small amount of paraffin wax or silicone spray to contact points between slats and frame if necessary.
Drawers do not slide smoothly.Obstruction in the drawer path or misaligned.Check for objects blocking the drawers. Ensure drawers are assembled correctly and aligned. Clean any debris from the bottom of the daybed where drawers slide.
Missing parts during assembly.Packaging error.Contact MERITLINE customer support with your purchase details.

6. Specifications

  • Product Dimensions: 78.6"L x 57"W x 34"H
  • Color: Espresso
  • Material: Wood
  • Compatible Mattress Size: Full
  • Included Components: Slat, Storage Drawer
  • Assembly Required: Yes
  • Brand: MERITLINE
  • Model Number: Wood Daybed with Drawers
  • UPC: 195358048115
  • Target Audience: Teens and Adults
Dimensional diagram of MERITLINE Full Size Daybed

Figure 5: Detailed dimensional diagram of the MERITLINE Full Size Daybed, showing length, width, and height measurements for the frame and drawers.

7. Warranty & Support

For warranty information, please refer to the documentation included with your purchase or contact MERITLINE customer support directly. Specific warranty terms may vary.

If you encounter any issues or have questions regarding your MERITLINE Full Size Wood Daybed, please contact MERITLINE customer service. Have your model number and purchase date ready for faster assistance.

MERITLINE Customer Service: Please visit the official MERITLINE website or refer to your purchase receipt for contact details.

© 2023 MERITLINE. All rights reserved.

This manual is for informational purposes only. MERITLINE reserves the right to make changes to products without prior notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.