Keenetic Runner 4G N300

Keenetic Runner 4G N300 Wi-Fi Router User Manual

1. Introduction

This manual provides detailed instructions for the installation, configuration, and operation of your Keenetic Runner 4G N300 Wi-Fi Router. Please read this manual carefully before using the device to ensure proper setup and optimal performance. Keep this manual for future reference.

2. Package Contents

Verify that all items are present in your product package:

  • Keenetic Runner 4G N300 Router
  • 4G Antennas
  • Power Adapter
  • Ethernet Cable
  • Quick Start Guide

3. Product Overview

The Keenetic Runner 4G N300 is a versatile Wi-Fi router designed for reliable internet access, featuring integrated 4G LTE connectivity and a 4-port smart switch. It supports various SIM cards and offers robust security features, including parental controls.

Keenetic Runner 4G N300 Router, angled view showing ports and antennas

Figure 3.1: Angled view of the Keenetic Runner 4G N300 router, highlighting the Ethernet ports, SIM card slot, and external antennas.

Rear view of Keenetic Runner 4G N300 Router showing ports

Figure 3.2: Rear panel of the router, displaying the SIM card slot, WAN/LAN port (blue), and three additional LAN ports (grey).

Close-up of SIM card slot and Ethernet ports on Keenetic Runner 4G N300 Router

Figure 3.3: A detailed close-up of the SIM card slot and the four Ethernet ports, including the blue WAN/LAN port.

Top-down view of Keenetic Runner 4G N300 Router

Figure 3.4: Top-down view of the router, showing its compact design and the four external antennas.

4. Setup

4.1. SIM Card Installation

  1. Ensure the router is powered off.
  2. Locate the SIM card slot on the rear panel of the device (refer to Figure 3.2).
  3. Insert your LTE/4G/3G SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly according to the diagram near the slot.

4.2. Power Connection

  1. Connect the power adapter to the router's power input port.
  2. Plug the power adapter into a standard electrical outlet.
  3. The router will power on automatically. Wait for the indicator lights to stabilize, which may take a few minutes.

4.3. Initial Configuration

  1. Connect your computer or mobile device to the router via Wi-Fi (using the default SSID and password found on the router's label) or via an Ethernet cable to one of the LAN ports.
  2. Open a web browser and navigate to the router's default IP address (usually 192.168.1.1 or 192.168.0.1). Refer to the Quick Start Guide for the exact address.
  3. Follow the on-screen instructions to complete the initial setup, including setting up your Wi-Fi network name (SSID) and password, and administrative password.

5. Operating Instructions

5.1. Connecting Devices

Wi-Fi Connection:

  1. On your device, search for available Wi-Fi networks.
  2. Select your router's Wi-Fi network name (SSID).
  3. Enter your Wi-Fi password when prompted.

Ethernet Connection:

  1. Connect one end of an Ethernet cable to a LAN port on the router.
  2. Connect the other end of the Ethernet cable to the Ethernet port on your device (e.g., computer, gaming console).

5.2. Parental Controls

The Keenetic Runner 4G N300 includes effective parental control tools. These features allow you to manage internet access times, block specific websites, and filter content for connected devices. Access these settings through the router's web interface or the Keenetic mobile application.

5.3. Mesh Network Integration

This router is compatible with all Keenetic Mesh Routers as part of a multi-node mesh network. This allows you to expand your Wi-Fi coverage seamlessly throughout your home or office.

Multiple Keenetic routers forming a mesh network

Figure 5.1: An illustration showing various Keenetic devices, including the Runner 4G, configured to create a unified mesh Wi-Fi system for extended coverage.

6. Maintenance

To ensure optimal performance and longevity of your Keenetic Runner 4G N300 router:

  • Firmware Updates: Regularly check for and install firmware updates through the router's web interface. Updates often include security enhancements and performance improvements.
  • Cleaning: Keep the router clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners.
  • Ventilation: Ensure the router is placed in a well-ventilated area to prevent overheating. Do not cover ventilation openings.

7. Troubleshooting

If you encounter issues with your Keenetic Runner 4G N300, refer to the following common solutions:

ProblemPossible Solution
No Internet Connection
  • Check if the SIM card is properly inserted and active.
  • Verify that the 4G signal strength is adequate.
  • Restart the router by unplugging and replugging the power adapter.
  • Check your ISP settings in the router's web interface.
Wi-Fi Not Connecting
  • Ensure Wi-Fi is enabled on the router and your device.
  • Verify the Wi-Fi network name (SSID) and password are correct.
  • Move closer to the router to improve signal strength.
Slow Internet Speed
  • Check 4G signal strength and network congestion.
  • Ensure no background downloads or streaming are consuming bandwidth.
  • Consider repositioning the router for better signal reception.

8. Specifications

FeatureDetail
BrandKeenetic
Model NameRunner 4G
Item Model NumberKN-2210-01EN
ColorGrey
Operating SystemKeeneticOS
Connectivity Technology4G, Ethernet
Connections4G, Ethernet 3G/4G/LTE
Special FeaturesParental Control
Compatible DevicesCompatible with all Keenetic Mesh Routers as part of a multi node mesh network
Frequency Band ClassSingle-Band
Wireless Communication Standard802.11n
Recommended UsesHome, Professional
Included Components4G Antennas, Device, Power Adapter, Ethernet Cable, Quick Start Guide
Rechargeable BatteryNo
LanguageEnglish

9. Warranty and Support

For warranty information and technical support, please refer to the official Keenetic website or contact their customer service. Details can typically be found in the Quick Start Guide or on the product packaging.

Related Documents - Runner 4G N300

Preview Keenetic Runner 4G Quick Start Guide
A quick start guide for installing and setting up the Keenetic Runner 4G N300 Mesh Wi-Fi 4G Modem Router with a 4-Port Smart Switch (Model: KN-2210). Includes instructions on SIM card insertion, antenna setup, power connection, and initial configuration via Wi-Fi or Ethernet.
Preview Keenetic Buddy 5 AC1200 Mesh Wi-Fi 5 Range Extender with Ethernet Port - Datasheet
Detailed specifications and features for the Keenetic Buddy 5 (KN-3311), an AC1200 Mesh Wi-Fi 5 range extender with an Ethernet port, designed to extend reliable Wi-Fi coverage throughout your home.
Preview Keenetic Giga User Guide: Setup, Features, and Troubleshooting
Comprehensive user guide for the Keenetic Giga AC1300 Dual Band Smart Wi-Fi Router. Learn about setup, connecting to the internet via various methods, Wi-Fi optimization, USB drive usage, troubleshooting, and warranty information.
Preview Keenetic Extra DSL AC1200 Modem Router: Quick Start Guide for VDSL, ADSL, Ethernet, and 3G/4G Connections
Get started quickly with your Keenetic Extra DSL AC1200 modem router. This guide covers VDSL, ADSL, Ethernet, and 3G/4G USB modem connections, setup options, LED indicators, and troubleshooting.
Preview Keenetic Mesh Wi-Fi Router: Schnellstart-Anleitung
Schnellstart-Anleitung für Keenetic Mesh Wi-Fi Router. Einfache Einrichtung und zuverlässige Heimnetzwerk-Abdeckung. Enthält Installationsanweisungen und Support-Informationen.
Preview Keenetic Orbiter Pro AC1300 Mesh Wi-Fi Router/Extender Quick Start Guide
Quick start guide for the Keenetic Orbiter Pro AC1300 Mesh Wi-Fi 5 Gigabit Router/Extender (Model KN-2810), covering setup, mounting, and basic management.