1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your SPACEO Chromed Metal Storage Shelf. Please read these instructions carefully before assembly and retain them for future reference. This 5-tier shelving unit is designed for versatile storage in various environments, offering a robust and adjustable solution for organizing your items.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Assemble the unit on a soft, clean surface to prevent scratches.
- Do not overload the shelves. Distribute weight evenly.
- Keep small parts away from children during assembly.
- Always use appropriate tools and follow assembly steps in order.
2. Components List
Verify that all parts are included in your package before beginning assembly.
Image 2.1: All components of the SPACEO Chromed Metal Storage Shelf. This includes the adjustable feet, pole sections, wire shelves, and plastic clips.
| Part | Description | Quantity |
|---|---|---|
| Adjustable Feet | For leveling the shelf on uneven surfaces. | 4 |
| Pole Sections | Vertical support poles for the shelving unit. | 8 |
| Wire Shelves | The main storage surfaces. | 5 |
| Plastic Clips | Used to secure shelves at desired heights. | 20 |
3. Setup and Assembly
Assembly is straightforward and requires minimal time. No special tools are needed.
- Attach Adjustable Feet: Screw the four adjustable feet into the bottom ends of four pole sections. Ensure they are securely tightened.
- Assemble Bottom Poles: Connect the remaining four pole sections to the top of the pole sections with the adjustable feet. The poles have threaded ends that screw together.
- Install Plastic Clips: Determine the desired height for your bottom shelf. Snap two plastic clips around each pole at the same height, ensuring the arrows on the clips point upwards. These clips will create a ridge for the shelf to rest on.
- Place Bottom Shelf: Slide the first wire shelf down over the poles until it rests firmly on the plastic clips. Gently press down on each corner of the shelf to ensure it is fully seated.
- Repeat for Remaining Shelves: For each subsequent shelf, snap plastic clips onto the poles at your desired height and then lower the shelf onto them. Remember that the shelves are height-adjustable, allowing you to customize the spacing.
- Level the Unit: Once all shelves are in place, stand the unit upright. Adjust the screw-in feet at the bottom to ensure the shelf is stable and level on your floor.
Image 3.1: Detail of a wire shelf connection, showing how it rests on the plastic clips.
Image 3.2: Adjustable feet for leveling the shelf on uneven surfaces.
4. Operating Instructions
Adjusting Shelf Height
The SPACEO Chromed Metal Storage Shelf features height-adjustable shelves, allowing you to customize the unit to fit your specific storage needs.
- Empty the Shelf: Before adjusting, remove all items from the shelf you wish to reposition.
- Remove Shelf: Lift the shelf upwards off the plastic clips.
- Reposition Clips: Remove the plastic clips from the poles. Snap them back onto the poles at the desired new height, ensuring they are all at the same level and the arrows point upwards.
- Re-install Shelf: Lower the shelf back onto the newly positioned clips, pressing down gently to ensure it is secure.
Recommended Usage
This versatile shelving unit is suitable for a wide range of applications:
- Kitchen: Store food, kitchen utensils, dishes, and small appliances.
- Garage/Cellar: Organize tools, car parts, and other utility items.
- Living Areas: Display books, decorative items, or store media.
- Bedroom/Closet: Store clothes, shoes, and accessories.
- Bathroom: Keep towels, cosmetics, and toiletries organized.
5. Maintenance
To ensure the longevity and appearance of your SPACEO Chromed Metal Storage Shelf, follow these simple maintenance guidelines:
- Cleaning: Wipe down the shelves and poles regularly with a damp cloth. For best results, follow with a dry microfiber cloth to prevent water spots and maintain the chrome finish.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the chrome plating.
- Check Stability: Periodically check that all connections are secure and the unit remains level. Re-tighten adjustable feet if necessary.
- Weight Distribution: Always distribute weight evenly across the shelves to prevent stress on the structure.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shelf is wobbly/unstable | Uneven floor; feet not adjusted; loose connections. | Adjust the leveling feet at the bottom of the poles. Ensure all pole sections are tightly screwed together and shelves are fully seated on clips. |
| Shelf does not sit level on clips | Plastic clips are not at the same height on all poles. | Remove the shelf and re-position the plastic clips, ensuring they are aligned perfectly at the same height on all four poles. |
| Difficulty assembling poles | Poles not aligned correctly; threads are cross-threaded. | Ensure poles are straight when screwing together. Do not force. If cross-threaded, unscrew and try again carefully. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | SPACEO |
| Model Number | 3276050338708 |
| Manufacturer | ADEO |
| Material | Alloy Steel (Chromed) |
| Dimensions (L x W x H) | 90 x 35 x 180 cm |
| Item Weight | 13.2 kg |
| Number of Shelves | 5 |
| Shelf Type | Wire Shelf |
| Assembly Required | Yes |
| Mounting Type | Floor Mount (Freestanding) |
| Recommended Uses | Food, tools, firewood, kitchen utensils, dishes, shoes, cosmetics, towels, musical instruments, sports equipment, books, toys, car parts, clothing |
8. Warranty and Support
Specific warranty information and direct support contact details are not provided in the product data. For warranty claims or technical assistance, please refer to your purchase documentation or contact the retailer where the product was purchased. You may also visit the official SPACEO brand website for general information.
