AROMAR Ultrasonic Oil Diffuser and Cool Mist Humidifier User Manual

Introduction

Thank you for choosing the AROMAR Ultrasonic Oil Diffuser and Cool Mist Humidifier. This device combines aromatherapy, humidification, and ambient lighting to enhance your environment. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Important Safety Information

Please read and follow all safety instructions carefully to prevent injury or damage.

• Do not place the diffuser on an uneven or unstable surface.
• Keep out of reach of children and pets.
• Use only clean tap water or distilled water. Do not use hot water.
• Do not exceed the maximum water level indicated.
• Only use 100% pure essential oils. Avoid corrosive or chemical-based oils.
• Unplug the device before cleaning or refilling.
• Do not immerse the unit in water or other liquids.
• Do not block the mist outlet.
• If the unit emits smoke or an unusual smell, unplug it immediately.

Package Contents

Verify that all items are present in the package:

• AROMAR Ultrasonic Oil Diffuser (Model B096L2Y6KX)
• Power Adapter
• 3 Aromatic Essential Oils (Eucalyptus, Fresh Linens, Lavender Fields)
• User Manual

Image: The AROMAR Ultrasonic Oil Diffuser shown with three accompanying bottles of essential oils: Eucalyptus, Fresh Linens, and Lavender Fields.

Product Overview

Familiarize yourself with the main components of your AROMAR diffuser.

Image: The AROMAR Ultrasonic Oil Diffuser, featuring its unique amphora shape and glowing with a pink LED light, resting on a white pedestal.

• Mist Outlet: Where the cool mist is released.
• Water Tank: Holds water and essential oils.
• Max Water Level Line: Indicates the maximum fill capacity.
• Ultrasonic Plate: Generates ultrasonic vibrations to create mist.
• Mist Button: Controls mist output.
• Light Button: Controls LED light colors and modes.
• Power Inlet: Connects to the power adapter.

Setup Instructions

1. Place the Diffuser: Position the diffuser on a flat, stable surface away from direct sunlight or heat sources.
2. Remove the Cover: Gently lift the top cover of the diffuser.
3. Add Water: Fill the water tank with clean tap water or distilled water up to the "MAX" line. Do not overfill.
4. Add Essential Oil: Add 5-10 drops of your preferred AROMAR essential oil directly into the water tank. Adjust the amount based on desired fragrance intensity.
5. Replace the Cover: Securely place the top cover back onto the diffuser.
6. Connect Power: Plug the power adapter into the power inlet at the base of the diffuser, then plug the adapter into a standard electrical outlet.

Image: A close-up view of the AROMAR diffuser's top opening, with a bottle of Lavender Fields essential oil positioned nearby, illustrating the process of adding oil.

Operating Instructions

Mist Control:

• Press the Mist Button once to turn on continuous mist.
• Press the Mist Button again to turn off the mist.

Light Control:

• Press the Light Button once to turn on the 7-color rotating LED light.
• Press the Light Button again to pause on a specific color.
• Continue pressing the Light Button to cycle through individual colors.
• Press and hold the Light Button for 2 seconds to turn off the light.

Automatic Shut-Off: The diffuser will automatically shut off when the water level is too low, ensuring safety and prolonging the unit's lifespan.

Image: The AROMAR diffuser glowing blue and emitting a gentle mist, with a bottle of Fresh Linens essential oil placed beside it, suggesting its use.

Care and Maintenance

Regular cleaning helps maintain optimal performance and extends the lifespan of your diffuser.

1. Unplug: Always unplug the diffuser from the power outlet before cleaning.
2. Empty Water: Remove the cover and carefully empty any remaining water from the tank, ensuring water does not enter the air outlet.
3. Clean Water Tank: Wipe the inside of the water tank with a soft cloth. For stubborn residue, use a cotton swab dipped in white vinegar to gently clean the ultrasonic plate.
4. Clean Exterior: Wipe the exterior of the diffuser with a soft, damp cloth.
5. Dry Thoroughly: Allow all parts to air dry completely before reassembling or storing.

Important: Do not use harsh detergents, abrasive cleaners, or solvents, as these may damage the diffuser. Clean the diffuser regularly, especially when changing essential oils or after 3-5 uses.

Troubleshooting

Specifications

Warranty and Support

For product support, troubleshooting assistance, or warranty inquiries, please contact AROMAR customer service. Refer to the product packaging or the official AROMAR website for the most current contact information.

You can also visit the Aromar Store on Amazon for additional product information and support resources.