Spigen Ultra Hybrid S Case for iPhone 13 Pro Max - Instruction Manual

Introduction

This manual provides essential information for the proper use and care of your Spigen Ultra Hybrid S case, designed specifically for the iPhone 13 Pro Max. Please read these instructions carefully to ensure optimal performance and longevity of your product.

Compatibility

This Spigen Ultra Hybrid S case is exclusively designed for the iPhone 13 Pro Max. It is not compatible with iPhone 13 mini, iPhone 13, or iPhone 13 Pro models.

Image showing the Spigen Ultra Hybrid S case on an iPhone 13 Pro Max, highlighting its compatibility and non-compatibility with other iPhone 13 models.

Installation Guide

Step 1: Prepare the Case

Before installing the case, ensure you remove the protective films from both the inside and outside surfaces. These films are present to prevent scratches during manufacturing and shipping and should be peeled off for crystal clear transparency.

Images demonstrating the removal of protective films from both the exterior and interior surfaces of the Spigen Ultra Hybrid S case.

Step 2: Install Your iPhone

Gently align your iPhone 13 Pro Max with the case, ensuring all buttons and ports are correctly positioned. Press the phone firmly into the case until it is securely seated. Verify that all edges of the phone are fully enclosed by the case.

Front view of an iPhone 13 Pro Max securely fitted within the Spigen Ultra Hybrid S case, showcasing its clear design.

Operating Features

Integrated Metal Kickstand

The Spigen Ultra Hybrid S case features an integrated metal kickstand with a magnetic closure. This kickstand allows for stable and comfortable hands-free viewing. To use, simply pull out the kickstand from its recessed position. Push it back in until the magnet engages to secure it when not in use.

An iPhone 13 Pro Max in the Spigen Ultra Hybrid S case, utilizing the integrated metal kickstand for hands-free viewing.

Enhanced Protection

This case combines a durable polycarbonate back with a flexible Thermoplastic Polyurethane (TPU) bumper, utilizing Spigen's Air Cushion Technology for superior shock absorption. Raised bezels around the camera and screen provide additional protection against surface scratches when the phone is placed face down or on its back.

Close-up view of the Spigen Ultra Hybrid S case highlighting raised edges for screen and camera protection.

Wireless Charging Compatibility

The Spigen Ultra Hybrid S case is designed to support wireless charging without requiring removal. Simply place your iPhone 13 Pro Max with the case on a compatible wireless charger. Ensure proper alignment for efficient charging.

An iPhone 13 Pro Max in the Spigen Ultra Hybrid S case being charged wirelessly on a charging pad.

Care and Maintenance

To maintain the clarity and appearance of your Spigen Ultra Hybrid S case, clean it regularly with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or alcohol-based solutions, as these can damage the case material or accelerate discoloration.

While the case is designed to resist yellowing, prolonged exposure to direct sunlight and certain chemicals can accelerate this process. Store the case away from extreme temperatures and direct UV light when not in use.

Troubleshooting

Kickstand Issues

If the metal kickstand feels loose or does not close properly, gently check for any debris or obstructions in the hinge mechanism. Ensure it is fully extended or retracted until the magnetic closure engages. Avoid forcing the kickstand, as this may cause damage.

Case Discoloration (Yellowing)

Clear cases, including those made from TPU, can experience yellowing over time due to UV exposure and natural material degradation. While Spigen uses advanced materials to minimize this, it is a common characteristic of transparent cases. Regular cleaning and avoiding prolonged direct sunlight exposure can help slow down this process.

Product Specifications

Warranty and Support

This Spigen product comes with a 1-year warranty against manufacturing defects. For warranty claims or technical support, please contact Spigen customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.

Manufacturer Contact Information: Spigen Korea Co., Ltd. / SpigenHQ, 446, Bongeunsa-ro, Gangnam-gu, Seoul, Rep. of Korea

Packer Contact Information: Spigen India Private Limited / NO.295 - 296, Ecotech-1, Extension, Greater Noida, Uttar Pradesh 201310, India