SINGER Stitch Quick+ Portable Cordless Mending Machine User Manual

1. Introduction

The SINGER Stitch Quick+ is a portable, cordless mending machine designed for quick fixes, small projects, and everyday fabric repairs. It is ideal for tasks such as mending seams, hemming, or crafting. This machine is not intended as a substitute for a full-size sewing machine, especially for thicker fabrics or large-scale projects. For optimal performance and longevity, please read this manual thoroughly before use.

Image 1.1: The SINGER Stitch Quick+ portable mending machine with its accessory kit and storage bag.

2. Product Components

Familiarize yourself with the various parts of your SINGER Stitch Quick+ mending machine to ensure correct operation.

Image 2.1: Labeled diagram of the SINGER Stitch Quick+ machine components.

• Thread Tension Dial: Adjusts the tightness of the upper thread.
• Thread Guides (1-5): Direct the upper thread through the machine.
• Bobbin Winding Hole: Used for winding thread onto bobbins.
• Handwheel: Manually raises and lowers the needle.
• Upper Bobbin: Holds the upper thread spool.
• Mode Selector Switch: Toggles between Handheld, Desktop, and Lock modes.
• ON/OFF Button: Activates or deactivates the machine.
• Handle Storage Recess: Area for comfortable grip in handheld mode.
• Thread Take-up Lever: Controls the flow of the upper thread.
• Thread Cutter: Conveniently cuts thread after stitching.
• Needle Clamp Screw: Secures the needle in place.
• Needle: Pierces the fabric to form stitches.
• Presser Foot: Holds the fabric firmly against the feed dogs.
• Presser Foot Lifter: Raises and lowers the presser foot.
• Bobbin Case Cover: Protects the bobbin compartment.
• Bobbin Case & Bottom Bobbin: Holds the lower thread.
• Attached Rear Battery Cover: Secures the battery compartment.

Included Accessories

The Stitch Quick+ bundle includes a 39-piece sewing accessory kit to get you started immediately.

Image 2.2: Contents of the sewing notion starter pack, including thread, bobbins, needles, and tools.

• 5 Machine Needles
• 1 Needle Threader
• 1 Seam Ripper
• 16 Polyester Thread Spools in Assorted Colors (25 yards each)
• 16 Matching Colored Bobbins
• Drawstring Storage Bag

3. Setup

3.1 Powering the Machine

The Stitch Quick+ can be powered by four (4) AA Alkaline batteries (not included) or an AC adapter (not included).

Image 3.1: The battery compartment requires four AA Alkaline batteries.

• Battery Installation: Open the attached rear battery cover. Insert four AA Alkaline batteries, ensuring correct polarity (+/-). Close the cover securely.
• Important Battery Reminders:
  • Always replace all four batteries at once.
  • Use Alkaline batteries ONLY for optimal performance.
  • Do NOT use Carbon Zinc or Heavy Duty batteries as they may cause malfunction.
• AC Adapter (Optional): If using an AC adapter (not included), plug it into the designated port on the machine.

3.2 Threading the Machine

Proper threading is crucial for consistent stitch quality. Ensure the device is in the LOCK/OFF position before threading.

Image 3.2: Step-by-step guide for threading the upper thread.

1. Place the upper bobbin or spool with thread (A) onto the spool pin, ensuring it unwinds in a counter-clockwise direction.
2. Pull the thread through Thread Guide 1 (B).
3. Slip the thread between the two discs of the Thread Tension Dial (C).
4. Pull thread through Thread Guide 2 (D) (from the back to the front), then through the Thread Take-Up Lever (E) (from the front to the back).
5. Continue pulling thread through Thread Guide 3 (F) (from the front to the back) and Thread Guide 4 (G) (downwards).
6. Raise the Needle (H) using the handwheel. Pass the needle threader through the eye of the needle, from right to left. Pass the thread through the eye of the needle using the threader. Remove the needle threader.

Note: For easier sewing, the machine comes pre-threaded to avoid initial threading difficulties.

3.3 Bobbin Winding

The machine features a built-in bobbin winder for convenience.

• Place an empty bobbin onto the bobbin pin for rewinding.
• Guide thread from the upper spool through the bobbin winding hole and around the empty bobbin.
• Engage the bobbin winder and press the ON/OFF button to wind thread onto the bobbin.

4. Operating Instructions

4.1 Mode Selection

The Stitch Quick+ offers three operational modes via the mode selector switch:

• Handheld Mode: For quick, on-the-go repairs and difficult-to-reach areas.
• Desktop Mode: For more stable and controlled stitching on a flat surface.
• Lock Mode: Disables the machine for safety during threading, needle changes, or storage.

4.2 Stitching

The machine uses a two-thread stitching mechanism for enhanced durability and locked stitches.

• Prepare Fabric: Place the fabric under the presser foot. Lower the presser foot using the lifter.
• Start Sewing: Select your desired mode (Handheld or Desktop). Press the ON/OFF button to begin stitching. Guide the fabric gently.
• Adjust Tension: Use the tension dial to achieve balanced stitches. Adjust as needed for different fabric types.
• End Sewing: Press the ON/OFF button to stop. Raise the presser foot, pull the fabric away, and use the thread cutter to snip the threads.

4.3 Material Compatibility

The Stitch Quick+ is suitable for various fabric types. Select appropriate needles based on project type and fabric weight for best stitch quality.

Image 4.1: Examples of compatible fabrics including denim, knit, cotton, and polyester. Not suitable for heavyweight fabrics like leather or wool.

• Compatible Fabrics: Denim, Cotton, Polyester, Knit fabrics, Paper crafts.
• Not Recommended For: Heavyweight fabrics such as leather or wool.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your mending machine.

• Cleaning: Periodically clean lint and dust from the bobbin area and around the needle plate using a small brush.
• Needle Replacement: Replace needles regularly, especially if they become bent, dull, or if you are experiencing skipped stitches. Ensure the flat side of the needle faces the back of the machine when inserting.
• Storage: When not in use, store the machine in its drawstring bag in a dry, clean place. Remove batteries if storing for extended periods.

6. Troubleshooting

If you encounter issues with your Stitch Quick+, refer to the common problems and solutions below.

Image 6.1: Common causes of poor stitches and how to address them.

1. Poor Stitches:
   • The upper threading is not correct. Re-thread the machine carefully.
   • The presser foot is not in the down position. Lower the presser foot before sewing.
   • The needle is not fully inserted in the needle bar. Ensure the needle is pushed up as far as it can go and secured with the clamp screw.
   • The needle eye is not facing the right or the left of the machine. Ensure the needle is correctly oriented.
   • The needle is bent. Replace with a new, straight needle.
   • Lower threading is not correct. Check the bobbin placement and threading in the bobbin case.
   • The wrong size bottom bobbin is used. Use only bobbins designed for this machine.
   • Upper threading is too loose. Adjust the tension dial to a higher number.
   • The bobbin placement in the case is not in the right position, which will block its correct movement. Re-seat the bobbin correctly.
2. Machine Not Turning On:
   • Check if batteries are correctly inserted and are fresh Alkaline batteries.
   • If using an AC adapter, ensure it is properly connected and functional.
   • Ensure the mode selector switch is not in the LOCK position.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your product packaging or visit the official SINGER website. Contact information for customer service is typically available on the manufacturer's website.