Lepro PR320016-a

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Lepro LED Headlamp User Manual

Model: PR320016-a

Product Overview

The Lepro LED Headlamp is a versatile and lightweight lighting solution designed for various outdoor activities. It features multiple lighting modes, including white light (high, low, strobe) and red light (steady, flash), providing adaptable illumination for different environments. Powered by AAA batteries, it offers extended run times and is built with an IPX4 waterproof rating for reliable performance in challenging conditions. Its ergonomic design ensures comfort during prolonged use.

Figure 1: Lepro LED Headlamp. This image shows the headlamp with its adjustable elastic headband and the main light unit.

Package Contents

One (1) Lepro LED Headlamp
User Manual (this document)

Note: Batteries are not included and must be purchased separately. The headlamp requires 3 AAA batteries.

Setup

1. Battery Installation

Locate the battery compartment on the side of the headlamp unit.
Open the battery compartment cover.
Insert three (3) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
Close the battery compartment cover securely until it clicks into place.

2. Adjusting the Headband

The elastic headband is adjustable to fit various head sizes, for both adults and children. To adjust, slide the buckles on either side of the headband until a comfortable and secure fit is achieved.

Figure 2: Headlamp features showing adjustable headband and 60° tiltable head. The headlamp weighs only 1.62 oz.

3. Adjusting the Light Angle

The headlamp unit can be tilted up to 60 degrees to direct the light beam precisely where needed. Gently push or pull the light unit to adjust its angle.

Operating Instructions

Power Button and Mode Cycling

The headlamp is operated by a single button located on the top of the unit. Pressing this button cycles through the available lighting modes.

Figure 3: Illustration of the six lighting modes: High, Medium, Low, Flood Light, Red Light (Stay On), and Red Light (Flash).

Lighting Modes and Operation
Press Sequence	Mode	Description
1st Press	White Light - High	Maximum brightness for clear visibility.
2nd Press	White Light - Low	Reduced brightness for close-range tasks or battery saving.
3rd Press	White Light - Strobe	Flashing white light for signaling or emergencies.
4th Press	Flood Light	Wider beam for illuminating a larger area.
5th Press	Red Light - Stay On	Preserves night vision and is less disruptive to others.
6th Press	Red Light - Flash	Flashing red light for safety or signaling.
7th Press	Off	Turns the headlamp off.

To turn off the headlamp from any mode, press and hold the power button for approximately 2 seconds.

Figure 4: Depiction of the headlamp's spotlight (25° beam angle, up to 120 meters) and floodlight (85° beam angle) capabilities.

Maintenance

Cleaning: Wipe the headlamp with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Battery Replacement: Replace all three AAA batteries simultaneously when the light dims significantly or stops working. Do not mix old and new batteries, or different types of batteries.
Storage: If storing the headlamp for an extended period, remove the batteries to prevent leakage and damage to the device. Store in a cool, dry place.
Water Resistance: The headlamp is IPX4 waterproof, meaning it is resistant to splashing water from any direction. It is not designed for submersion. Ensure the battery compartment is securely closed before exposure to moisture.

Figure 5: The headlamp demonstrating its IPX4 water resistance, preventing splashing water from entering the device.

Troubleshooting

Common Issues and Solutions
Problem	Possible Cause	Solution
Headlamp does not turn on.	Batteries are dead or low. Batteries are inserted incorrectly. Battery compartment not closed properly.	Replace with new AAA batteries. Check battery polarity and reinsert correctly. Ensure battery compartment cover is fully closed.
Light is dim or flickers.	Batteries are low. Poor battery contact.	Replace with new AAA batteries. Remove and reinsert batteries, ensuring good contact with terminals.
Headlamp gets wet inside.	Battery compartment not sealed. Exposure to water beyond IPX4 rating (e.g., submersion).	Ensure battery compartment is securely closed before use in wet conditions. Dry the unit thoroughly and remove batteries. Avoid further exposure to excessive water.

Specifications

Feature	Detail
Model Number	PR320016-a
Brand	Lepro
Light Source Type	LED
Brightness	Up to 1500 Lumens (White Light)
Light Modes	White (High, Low, Strobe, Flood), Red (Stay On, Flash)
Beam Distance	Up to 120 meters
Power Source	3 x AAA Batteries (not included)
Voltage	4.5 Volts (DC)
Run Time (approx.)	Up to 30 hours (Low brightness), 7 hours (High brightness)
Water Resistance	IPX4 (Splash-proof)
Material	Polyethylene
Color	Black
Product Dimensions	63 x 45 x 35 mm (approx.)
Weight	46 g (without batteries)
Special Features	Adjustable angle, Lightweight, Comfortable headband

Warranty and Support

For warranty information or technical support, please contact Lepro customer service. Details can typically be found on the product packaging or the official Lepro website.

Please retain your purchase receipt as proof of purchase for warranty claims.

For more information, visit the official Lepro store: Lepro Store on Amazon.ca

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.