1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WOLFSTORM LED Tail Light Assembly. These tail lights are designed to enhance the rear lighting of your Jeep Wrangler JL/JLU, featuring sequential turn signals and a smoked lens finish. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: WOLFSTORM LED Tail Lights (Smoked Lens) and a Jeep Wrangler JL.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage.
- Ensure the vehicle is parked on a level surface with the parking brake engaged.
- Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
- If you are unsure about any step of the installation process, consult a qualified automotive technician.
- Verify all connections are secure and correct before restoring power to the vehicle.
3. Package Contents
Your WOLFSTORM LED Tail Light Assembly package should contain the following items:
- 1x Left LED Tail Light Assembly (Smoked Lens)
- 1x Right LED Tail Light Assembly (Smoked Lens)
- Necessary wiring harnesses (pre-attached or included for plug-and-play installation)
4. Specifications
| Feature | Description |
|---|---|
| Brand | WOLFSTORM |
| Model Number | WSA230 |
| Color | Smoke Lens |
| Auto Part Position | Rear |
| Special Features | LED Daytime Running Lights Design, LED Dynamic Sequential Turning Light Effect |
| Material | Plastic |
| Water Resistance Level | Water Resistant |
| Automotive Fit Type | Vehicle Specific Fit |
| Compliance | DOT/SAE Compliant |
| Item Weight | 7.39 pounds (approx.) |
| Package Dimensions | 20 x 11.06 x 10.35 inches (approx.) |
Image 4.1: Tail Light Dimensions.
Image 4.2: DOT/SAE Compliance Marking.
Image 4.3: Durability Features (Dustproof, Waterproof, Cold-proof).
5. Compatibility
These WOLFSTORM LED Tail Lights are designed for direct fitment on the following vehicles:
- Jeep Wrangler JL (2-door) models: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
- Jeep Wrangler JLU (4-door) models: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Please ensure your vehicle is within the specified model years for proper fitment and functionality.
6. Installation Guide
The WOLFSTORM LED Tail Lights feature a plug-and-play design for straightforward installation. No modifications to the vehicle's wiring are typically required.
Tools Required:
- Basic hand tools (e.g., screwdriver, socket wrench, trim removal tool if needed)
Installation Steps:
- Prepare the Vehicle: Park your Jeep Wrangler JL/JLU on a level surface and engage the parking brake. Turn off the engine and remove the key from the ignition.
- Disconnect Battery (Recommended): For safety, disconnect the negative terminal of your vehicle's battery.
- Remove OEM Tail Lights: Locate the screws or clips securing the factory tail light assembly. Carefully remove them. Gently pull the tail light assembly away from the vehicle body.
- Disconnect Wiring: Disconnect the electrical connector from the back of the OEM tail light.
- Install WOLFSTORM LED Tail Lights: Connect the wiring harness of the new WOLFSTORM LED Tail Light to the vehicle's factory connector. Ensure the connection is secure.
- Secure New Tail Lights: Align the new LED tail light assembly with the mounting points on the vehicle. Push it firmly into place and secure it using the original screws or clips.
- Repeat for Other Side: Follow the same steps for the other tail light assembly.
- Reconnect Battery: Reconnect the negative terminal of the vehicle's battery.
- Test Functionality: Turn on your vehicle and test all tail light functions: running lights, brake lights, turn signals (left and right), and reverse lights.
Image 6.1: Installation Overview (Original Fitment & Plug & Play).
Image 6.2: Plug & Play Wiring Connection.
Image 6.3: Installed WOLFSTORM LED Tail Lights on a Jeep Wrangler JL.
7. Operation
The WOLFSTORM LED Tail Lights provide enhanced visibility and a distinct appearance with their multi-function LED design:
- Running Lights: Illuminate when your vehicle's headlights or parking lights are on, providing constant rear visibility.
- Brake Lights: Brightly illuminate when the brake pedal is pressed, signaling deceleration to following vehicles.
- Dynamic Sequential Turn Signals: The amber LEDs illuminate in a sequential pattern from the inside out when the turn signal is activated, providing a clear and modern indication of your turning intention.
- Reverse Lights: Bright white LEDs activate when the vehicle is in reverse, illuminating the area behind the vehicle for improved visibility during backing maneuvers.
Image 7.1: Tail Light Functions.
Image 7.2: Night Effect of Tail Light Functions.
Image 7.3: Dynamic Sequential Turn Signal Effect.
8. Care and Maintenance
To ensure the longevity and optimal performance of your WOLFSTORM LED Tail Lights, follow these care guidelines:
- Cleaning: Clean the lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.
- Inspection: Periodically inspect the tail lights for any signs of damage, loose connections, or debris accumulation.
- Water Resistance: While the lights are water-resistant, avoid directing high-pressure water jets directly at the seals during washing.
9. Troubleshooting
If you encounter any issues with your WOLFSTORM LED Tail Lights, refer to the following common troubleshooting steps:
- Lights Not Functioning:
- Check all electrical connections to ensure they are securely plugged in.
- Verify that the vehicle's fuses related to tail lights are intact and not blown.
- Ensure the vehicle's battery is properly connected and charged.
- Condensation Inside Lens:
- Minor condensation can occur due to temperature changes and is often temporary. It should dissipate as the lights warm up during operation.
- If excessive or persistent condensation occurs, inspect the housing for cracks or improper sealing. Contact customer support if the issue persists.
- Flickering or Irregular Operation:
- Check for loose wiring connections.
- Ensure the vehicle's electrical system is providing stable voltage.
If these steps do not resolve the issue, please contact WOLFSTORM customer support for further assistance.
10. Warranty and Support
WOLFSTORM stands behind the quality of its products. Your LED Tail Light Assembly is covered by a 12-month warranty from the date of purchase.
Additionally, we offer a 30-day free return policy if you are not satisfied with the product.
For warranty claims, technical support, or any questions regarding your WOLFSTORM LED Tail Lights, please contact our customer service team through the retailer where the product was purchased or visit the official WOLFSTORM brand store online.
WOLFSTORM is a manufacturer with over 20 years of experience in vehicle lighting, committed to providing reliable and high-quality products.