OutdoorMaster The Whale 16PSI High-Pressure SUP Air Pump User Manual

Introduction

Thank you for choosing the OutdoorMaster The Whale 16PSI High-Pressure SUP Air Pump. This intelligent, dual-stage electric pump is designed for efficient inflation and deflation of inflatable stand-up paddle boards (SUPs) and other high-pressure inflatables. Featuring a built-in rechargeable battery and auto-off function, it simplifies your setup and pack-down process, allowing you more time to enjoy your outdoor activities.

Safety Information

• Read all instructions before use.
• Do not operate the pump in wet conditions or immerse it in water.
• Keep children and pets away from the pump during operation.
• Ensure the correct nozzle is securely attached to prevent air leakage and potential injury.
• Do not exceed the recommended pressure for your inflatable item. The auto-off function will prevent over-inflation if set correctly.
• Avoid blocking the air intake or exhaust ports during operation to prevent overheating.
• If the pump overheats, allow it to cool down before resuming use.
• Use only the provided charging cables and adapters.

Package Contents

Image: The OutdoorMaster The Whale pump, DC car charger, AC adapter, hose, and various nozzles are shown neatly arranged in their packaging.

• OutdoorMaster The Whale 16PSI SUP Air Pump
• High-Pressure Hose
• 12V DC Car Charger Cable
• AC Adapter
• Full Set of Nozzles (including C7 & H3 valve, yoga ball, inflatable tent, inflatable pool, inflatable boat, inflatable paddle board)
• User Manual (this document)

Product Overview

Image: A detailed view of the pump's control panel with digital display, power button, PSI/BAR toggle, LED light button, and pressure adjustment buttons. The inflate and deflate ports are also visible.

The OutdoorMaster The Whale pump features an intuitive control panel with a digital display for easy operation. It includes dedicated ports for inflation and deflation, ensuring efficient air management. The integrated handle provides portability, and the internal storage compartment keeps charging cables organized.

Setup

1. Charging the Pump

Image: The pump is shown connected to a 12V DC car outlet and a standard AC wall outlet for charging, illustrating its versatile power options.

The pump comes with a built-in 6000mAh rechargeable lithium-ion battery. Before first use, fully charge the pump using either the provided AC adapter (for wall outlets) or the 12V DC car charger cable. The digital display will indicate the battery level during charging.

2. Attaching the Hose and Nozzles

Image: A collection of different nozzle attachments, including those for inflatable paddle boards, boats, arches, pools, and tents, demonstrating the pump's versatility.

1. Select the appropriate nozzle attachment for your inflatable item.
2. Attach the selected nozzle securely to the end of the high-pressure hose.
3. For inflation, connect the other end of the hose to the 'Inflate' port on the pump. For deflation, connect it to the 'Deflate' port.
4. Ensure all connections are tight to prevent air loss during operation.

Operating Instructions

1. Setting Desired Pressure

Image: A close-up of the pump's digital display, indicating a target pressure of 16 PSI, highlighting the programmable and hassle-free operation.

• Press and hold the Power button to turn on the pump. The digital display will illuminate.
• Use the '+' and '-' buttons to set your desired pressure. The pump supports up to 16 PSI.
• Press the PSI/BAR button to toggle between Pounds per Square Inch (PSI) and Bar units.

2. Inflation Process

Image: The OutdoorMaster The Whale pump is shown connected to a paddle board on the shore of a lake, actively inflating it while two people relax nearby.

1. Connect the hose to the 'Inflate' port on the pump and the appropriate nozzle to your inflatable item.
2. Set your desired pressure using the '+' and '-' buttons.
3. Press the Power button to start inflation. The pump will operate in two stages:
• Stage 1 (High Volume): Inflates rapidly at 350L/min until a certain pressure is reached (typically around 1-1.5 PSI).
• Stage 2 (High Pressure): Automatically switches to a higher pressure, lower volume mode (70L/min) to reach the set PSI.
4. The digital display will show the real-time pressure.
5. The pump will automatically shut off once the set pressure is achieved.

3. Deflation Process

Image: The OutdoorMaster The Whale pump is connected to a paddle board for deflation, showing the hose attached to the deflate port and the board flattening.

1. Connect the hose to the 'Deflate' port on the pump and the appropriate nozzle to your inflatable item.
2. Press the Power button to start deflation. The pump will actively remove air from the inflatable, making it easier to pack.
3. Press the Power button again to stop deflation.

4. Using the LED Light

The pump is equipped with an LED light for convenience in low-light conditions. Press the 'Light' button on the control panel to turn the LED light on or off.

Maintenance

• Cleaning: Wipe the pump exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the hose and nozzles are clean and dry before storing.
• Battery Care: For optimal battery life, charge the pump fully before long-term storage and recharge it every 3-6 months if not in use.

Troubleshooting

Specifications

Official Product Video

Warranty and Support

The OutdoorMaster The Whale 16PSI High-Pressure SUP Air Pump comes with a 1-Year Warranty. For any product inquiries, technical support, or warranty claims, please contact OutdoorMaster customer service through the retailer's platform or visit the official OutdoorMaster website for contact information.