NC Bear Fashion Car Sticker Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation and care of your NC Bear Fashion Car Sticker. Designed for durability and aesthetic appeal, these vinyl decals are perfect for personalizing your vehicle or other smooth surfaces.

2. Product Features

• Material: Made from high-quality PVC for long-lasting use.
• Durability: Waterproof and sun-proof, ensuring the decal maintains its appearance over time.
• Easy Application: Features an adhesive backing for simple peel-and-stick installation.
• Residue-Free Removal: Designed to be removed without leaving residual adhesive or damaging the surface.
• Versatile Decoration: Suitable for various smooth surfaces including car bodies, headlamps, hoods, trunks, motorcycles, scooters, side windows, rear windshields, laptops, notebooks, skateboards, and snowboards.
• Design: Features a unique bear fashion design to personalize and enhance the look of your vehicle.

3. Package Contents

Your package should contain the following items:

• 5 x NC Bear Fashion Car Stickers (Vinyl Decals)

4. Setup and Installation Instructions

Follow these steps carefully for optimal application and adhesion of your car sticker:

1. Prepare the Surface: Thoroughly clean the surface where the decal will be attached. Ensure it is dry, smooth, and free from dust, dirt, grease, or wax. Use a mild cleaner and allow the surface to dry completely.
2. Peel Backing Slowly: Slowly and carefully remove the paper backing from the decal. Ensure that the decal remains stuck to the clear transfer tape. If any part of the decal lifts with the paper backing, gently press the paper backing back down until the decal adheres to the transfer tape.
3. Position the Decal: Once the decal is peeled away from its backing, carefully align and place the decal onto the desired surface. Take your time to ensure proper positioning before pressing down.
4. Smooth Down the Decal: Use a squeegee, credit card, or similar flat object to smooth down the decal. Start from the center and work outwards, applying firm, even pressure to remove any air bubbles and ensure the decal is completely stuck to the surface.
5. Remove Transfer Tape: Carefully and slowly peel off the clear transfer tape from the decal. Pull it at a sharp angle (almost parallel to the surface) to prevent the decal from lifting. If any part of the decal does not release from the transfer tape, press it back onto the surface and repeat the smoothing process before attempting to remove the tape again.

Image 1: The NC Bear Fashion Car Sticker design. This shows the white tribal-style bear head with flame-like elements, designed to be applied to various surfaces.

Image 2: Example of the NC Bear Fashion Car Sticker applied to the trunk of a vehicle. The white decal stands out against the dark car paint, demonstrating its decorative effect.

5. Operating and Usage

Once properly installed, your NC Bear Fashion Car Sticker is designed for long-term decorative use. It is suitable for both interior and exterior applications on smooth, non-porous surfaces. The decal is intended to personalize your items and cover minor surface imperfections like scratches.

6. Maintenance

The NC Bear Fashion Car Sticker is made from durable, waterproof, and sun-proof PVC, requiring minimal maintenance.

• Cleaning: You can clean the decal along with the surface it's applied to using mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the vinyl.
• Protection: While sun-proof, prolonged exposure to extreme weather conditions may eventually affect its longevity.

7. Troubleshooting

Most issues with decals arise during the application process. Here are some common problems and solutions:

• Bubbles Under Decal: If small air bubbles appear after application, you can gently prick them with a fine needle and then smooth them down with your finger or a squeegee. For larger bubbles, you may need to carefully lift a small edge of the decal and re-apply, smoothing as you go.
• Decal Not Sticking: Ensure the surface was thoroughly cleaned and dry before application. Cold temperatures can also affect adhesion; apply in a warm environment if possible.
• Decal Peeling Off Transfer Tape: This indicates the decal is not fully adhered to the surface. Re-press the decal firmly with a squeegee before slowly attempting to remove the transfer tape again.

8. Specifications

9. Warranty and Support

Customer satisfaction is our primary goal. While specific warranty details are not provided, we are committed to ensuring you are satisfied with your purchase.

If you have any questions, concerns, or require assistance with your NC Bear Fashion Car Sticker, please do not hesitate to contact our customer service team. We aim to provide a perfect solution within 24 hours of your inquiry.

For support, please refer to the contact information provided by your retailer or on the product packaging.